YSTRAL Batt-TDS

The DaiTec offers all the advantages of the Conti-TDS technology and is specially tailored to the requirements of the milk processing and food industry. It is characterized by its 3A certified design and a powder feeding table with integrated hopper at an ergonomic working height. It is connected directly to existing containers and is ready for operation after a few simple steps. Due to its powerful suction vacuum, the machine can suck in and disperse directly from the powder container by means of a suction pipe in addition to suction from the hopper. It ensures dust-free container emptying, powder transport, powder introduction, powder wetting and dispersion. Agglomerate-free, highly concentrated, homogeneous and very stable dispersions due to the use of high shear energy and the wetting/dispersing of powders under vacuum. Excellent emulsifying properties - narrow spectrum of droplet size even without high pressure homogenizer. 3A-certified design

The YSTRAL inline dispersing machines work according to the rotor-stator system. The dispersing machine is suitable for the production of suspensions, solutions and emulsions in the chemical, food, pharmaceutical and cosmetic industries. Due to the close radial gap between rotor and stator and the high circumferential speed of the rotating rotor, very large shear gradients are generated. The product enters the shear zone through the slots between the rotor teeth and leaves it again via the stator slots. Due to the multi-tooth configuration of rotor and stator, additional mechanical forces act on the product to be dispersed. The product is guided through a rotor-stator system. The liquid is highly accelerated by the inner rotor ring, is completely decelerated at the stator ring and then accelerated again to maximum speed via the next rotor ring. In this way, solid particles and/or droplets are effectively comminuted and homogeneously distributed.

The combination of different process steps in one machine provides you with great rationalisation potential: Production times are minimised, sub-processes are completely eliminated, production costs are reduced.The YSTRAL Conti-TDS is based on the same principle as the YSTRAL Inline Disperser. A special rotor-stator system generates a large negative pressure and absorbs powder, without dust formation and loss-free, directly into the liquid. The inducted powder is dispersed immediately and under high shear. Clean manufacturing process thanks to a dust and loss-free powder feed, even with powders that are difficult to wet, sticky or dusty Aspirating and dispersing of powders directly from silo (via buffer hopper), big bag, hopper, sack, barrel etc. Optimized result a better digestion, a higher effectiveness of the raw materials and a higher product quality.

Intensive vertical mixing of the container ingredients in the micro and macro range. An additional downstream shear ring dispersion is not necessary. Due to optimal dispersion performance, high efficiency and easy handling of the mixing tools used, the Dispermix meets the high requirements of demanding production processes for the introduction of liquids or powders into liquid. Agglomerates are crushed and thus better wetting of the powder with the liquid. Different slot widths allow the adaptation to the corresponding application. The Dispermix head generates two differently directed liquid streams. A vertical partial flow is directed straight to the vessel bottom, where it is divided and circulates the entire vessel contents. A second partial stream is deflected horizontally in the Dispermix head and guided through the dispersion zone. Solid particles and/or droplets are reliably comminuted and homogeneously distributed.