Results for

Distributor - Moulding of plastic materials

26 Companies

97 Products

FRIMO GROUP GMBH

Germany

That’s what FRIMO stands for. We believe the key to success is continuous, long-term development of both our expertise and the passion with which our teams do everything in their power to achieve the best technological solution. We have therefore gathered an unparalleled range of technologies within our corporate group, and this is what makes us the leading full-service provider of production systems for manufacturing high-quality plastic components. With 1500 employees at international locations in Europe, America, and Asia, as well as many international representatives in our corporate group, our 2016 turnover reached over 215 million Euros. Our innovative solutions have received 23 SPE awards. We know future-oriented technology requires highly qualified, active employees who listen, work as a team, and persevere, so that we can play a role in our customers’ success each and every day. With a willingness to change and the will to innovate, we never stop putting our global products and services to the test. In this process, quality and safety are our top priorities. Above all, every FRIMO solution is optimized for your individual needs.

See all products
SILCOPLAST AG

Switzerland

Forward-looking: The two companies "Plasticspritzerei AG" and "Silwo Silikon-Spritzerei AG" merged into one company and were relaunched in April 2014 under the name "Silcoplast AG". At Silcoplast, we are looking forward to optimally realising your requirements, right into the future, and working to ensure a reliable contribution to the quality of your products.
D.M. SRL

Italy

DM is a company that has been operating in the mould-making and thermoplastic processing sector since 1978; this synergistic combination represents a source of competitive advantage for the end customer. The experience gained over 30 years, contact with customers, special focus on technological innovation, professionalism and the young and dynamic spirit of the group are the characteristics that have enabled the company to achieve excellence, as confirmed by its results.
RPM RAPID PRODUCT MANUFACTURING GMBH

Germany

The company RPM RAPID PRODUCT MANUFACTURING GMBH, is a Distributor, which operates in the Prototypes, industrial industry. It also operates in the Sintering machine tools, moulding of plastic materials, plastic moulds, Sintering machine tools, and Automotive industries. It is based in Helmstedt, Germany.
FERONYL

Belgium

The company FERONYL, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Plastic injection, moulding of plastic materials, and injection moulding of plastics industries. It is based in Mouscron, Belgium.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

AMBROPLAST S.R.L.

Italy

Ambroplast SRL manufactures moulds for plastics, moulding and assembly of plastics, both injection moulding and gas-assisted moulding in accordance with ISO 9001: 2015, technical items and aesthetic details, rubber items and thermoplastic resins. It also offers custom fast prototyping, hot printing and printing on plastics, as well as surface finishing with screen printing on plastic, varnishing, plating and chroming, as well as pad printing and ultrasound welding. The company works out of via Gorizia 20, Albairate, Milan province.

Website
PLASTIV SP. Z O.O.

Poland

Manufacturer and distributor of plastic parts with many years of experience and knowledge in the field of plastics processing and the development of injection molds for injection molding production. Comprehensive service for our customer's projects, assessed on their complexity. Product development services from designing the injection mold through their production to the manufacturing of the final product. Our staff has an assessment of the material and technology supported by many years of professional experience in the plastics processing industry and the production in the automotive industry. We also provide consulting services on request in areas listed below: • Project management • Technical consultancy • Strategic and operational management • Maintenance management • Production management COMPANY OFFER: • Custom injection molding production in cooperation on molds provided by the customer • Outsourcing of production - injection molding machines up to 100T and weight up to 158g PS. • Performing inspections of the molding tools on request (forms up to 1T) • Production and distribution of plastic products - details on request • Manufacturing of molds and customized metal precision parts - details on request • Distributor of standard parts for injection molds like date stamps, ejectors, standard sleeves and other components for the molds • Distributor of quick couplings for molding tools • Consulting services on request Please send an inquire to our email address.

Website
SCHOCK GROUP

Germany

The SCHOCK GROUP is a group company with international operations and has its head office in the town of Urbach, near Stuttgart in south western Germany. At various sites across Europe, we develop and manufacture high-quality ball guides, telescopic rails, special profiles, plastic products and assemblies. These products are used all around the world in the automotive industry, major household appliances, the home and kitchen industries, as well as in many industrial applications . SCHOCK's key areas of expertise includes roll forming technology with a wide range of integrated processes. This means that we are able to produce high-quality smooth-running telescopic rails and high-precision profiles with extremely small tolerances and high material utilisation for our customers. Our high production depth enables us to offer a wide range of services in metal processing in order to produce your complex assemblies. With SCHOCK's powder coatings, we can produce high-performance and visually appealing product surfaces with long-term protection against corrosion and a customised colour scheme. SCHOCK uses advanced machinery to produce complex 1-component or 2-component plastic parts. Our areas of expertise also include mould manufacturing and tool manufacturing. Our German logistics hub supplies a continually growing range of over 150, 000 products in over 200 product categories for industry and trade right across Europe.

All the products for "moulding of plastic materials"

Injection Molds for Plastics - Highest Quality Achieved thro

Website See all products
DEME

France

Manufacturer of standard and bespoke joints (disc or shape and products to plan made from all flexible materials. We provide a wide range of cut products, from simple fibre fitting joints to complex parts created using special materials. Punch stamping of miscellaneous parts from rubber, plastic fibres, cork, cellular foam and felt. Technical parts made to measure to suit all your specific applications. Cutting strips, selective cutting, flat joints, o-rings. Cork and leather cutting. Plain and pierced valve and tap seals, vulcanised rubber joints, rubber joints, aramide fibre joints, o-rings, cellular foams, cork composite items, plastic items, strip cutting, selective cutting, moulded parts, boxes or bags, diverse leather parts. With a wide variety of materials used, we satisfy all your requirements: holding, hardness, thickness...Certified ISO9001 and owners of the NF ROBGAZ brand with 5 ranges of joints.

Website See all products
USNER CHEMICALS

Austria

As a family-managed business, we have been offering chemical-technical consultancy and the trade of thermoset materials, silicone elastomers and chemical specialties for plastic-processing companies, as well as products for the casting industry, since 1949. As a producer of binding agents based on furan/phenolic and alkyd resin as well as the corresponding hardeners for cast steel, we have been supplying the casting industry ever since our company was founded. As an exclusive representative of well-known producers in the composite industry, we deal in a wide range of chemical specialties for use in the most varied areas of application – including: • Epoxy and polyester resin systems • Epoxy prepregs • Liquid silicone rubber • Adhesives • Halogen-free flame retardants • Graphene • Reinforcement materials (glass rovings, mats, fabrics). • We also offer room-temperature-curing and liquid silicones for use in sealants and moulding compounds, and for applications in medical technology, health care and the electrical industry (liquid silicone rubber). Collaboration with our partner companies in particular allows us to be in dialogue with important and innovative plastic-processing companies, and to work together on new developments and projects. We supply both the basic raw materials and special additives, which we optimise together with our suppliers and customers so that they're customised depending on the application.

Website

FATRA A.S.

Czech Rep.

Fatra, a.s. is one of the world most significant plastic processing companies (PVC, PE, and PET). More than 75% of the production is exported. Fatra operates modern plastic processing technologies in its production plants in Napajedla and Chropyně with almost 1300 employees. Fatra, a.s. company offers top products and specialized customer-tailored solutions that include not only the production but also development activities and consulting services. Product range: vinyl floor coverings, waterproofing membranes, foils and sheets from PE/EVAC/PET, PVC granulate, extruded profiles, technical and special PVC-P foils, BO PET films, injection-moulded products (floor tiles, crate), re-granulate, toys and welded products. Fatra a.s. sells its products to 51 countries in the world. Materials processed include PVC-P, PVC-U, LDPE, LLDPE, HDPE, EVA, PP, PET, and ABS. High quality of products is supported by established quality management and ecology systems ČSN ISO 9001 and ČSN ISO 14001. Fatra, a.s. has vindicated its certificates “Responsible Care” and “Safe Company” for several times already. Fatra is equipped with state-of-the-art production facility and continuously extends and innovates its assortment for various industry fields. Applying the latest scientific and technical knowledge with focus on the quality, ecology. Fatra, a.s. is a member of the AGROFERT concern.

All the products for "moulding of plastic materials"

Injection moulding

Website See all products
MATCO

Belgium

Trading & distribution of chemicals for the foods, detergents, adhesives, paints, textile & plastic industry. Product details available in catalogue comprising triacetin, citric acid, phosphonates, GLDA, TAED, STPP... Distribution of post-consumer PVB for the injection, extrusion & molding industry in PP, PE, PVC for plastic, household, textile and automotive applications. Recycling off-spec (e.g. TiO2), 2nd grade & damaged chemicals or raw materials. Production waste/side-streams (liquids & solids) are treated for re-usable applications. We aim to prevent waste and maximize the re-use of raw materials. Compounding, production and blending of custom-made chemicals for carpet and artificial grass backing. EVA based compounds with low VOC content. Management of hazardous and non-hazardous waste, industrial cleaning. *Matco is an ADR approved company with warehousing services & administration support. Sales & trading activities in Europe, CEE, Middle-East, India and China.

Website See all products

Product recommendations

China

Germany

China

Germany

See more products

DECAPAC

Belgium

DECAPAC offers a comprehensive solution to your packaging problems, providing you with an extensive choice of high-quality synthetic packaging materials suitable for use with a very wide range of products. With its 15 years' experience of injection molding techniques backed by high quality decorations subject to a continuous improvement programme (IML and offset printing), Decapac is one of a select group of suppliers of top-end luxury packaging. In addition to packaging, Decapac also offers an extensive range of heat-seal films and pre-cut lids made from a variety of materials dependent on temperature range requirements. DECATRAY injected and thermoformed, heat-weldable plastic packaging for gas packing/MAP, DECATP encapsulated packaging with tamper-proof closures. Boxes, seals, trays, small pots, small containers with covers and/or membrane seals, IML printing (labels), offset printing. Made to measure designs, mould design and aesthetics. Heat-seal film, also pre-cut.

See all products
CMS FRANCE

France

The Composites Machines Systèmes (CMS) company has been marketing materials and tools for the composites industry since 1996. We distribute the brands: ALAN HARPER COMPOSITES: reusable silicone sheets for infusion; GRACO: simultaneous spray unit, gelcoat applicator. NORD COMPOSITES: polyester resin, gel coat, glue, casting resins, fibreglass.AXEL Plastics: Mould release. FARECLA: Polishing paste and glossing accessories. ESQUIM: Silicone elastomers. MIRKA: Abrasives. RESOLTECH: Epoxy resin. GENERAL PNEUMATIC: Pneumatic tools FOMICON: FROTH PAK® ready-to-use PU foam kit. RAMPF: Machinable boards and cast polyurethane products, fast cast, epoxy. TENSOR GRIP: Positioning glue in aerosol can. We also offer a complete range of tools: brushes, debubblers, calibration wax, cyanoacrylate glue, diamond-tipped tools, demoulding wedges, Plastiline, gravity-feed spray guns, sanders, cutters, PPE, mixers, heaters.
AS-KA QUALITÄTSPRODUKTE E.K.

Germany

As a second-generation family business, AS-KA has known exactly what it's doing ever since 1992 when it comes to the development, production and sale of individually manufactured rubber, TPE and plastic products, as well as metal and aluminium products for the German and international market. The focus here is on vulcanised and extruded rubber, TPE and plastic products, which are represented by the main product groups of profiles, tubes and moulded parts, as well as cast or turned metal and aluminium products, which are divided into the main groups of forged parts, turned parts and die-cast aluminium parts. So as to be able to offer our customers from the automotive, cab and caravan construction, industrial, electrical engineering, technical trade, construction and mechanical engineering, household goods and coach building fields – plus many more – a comprehensive product range, we have added sector-specific products such as insulation material, gas springs and other products to our product focuses.
AEDICE CO., LTD HANDELSVERTRETUNG MICHAEL KRUMME

Germany

Wherever AEDICE injection moulding machines are used, you can be assured of an uninterrupted production process thanks to high-quality components and the best price-performance ratio. AEDICE CO., LTD. has been a successful manufacturer of injection moulding machines since 1993. Our team of experts in Taiwan consists of experienced technicians and mechanical engineers, who manufacture machines that boast excellent performance and innovative design for maximum benefit. You can find the right machine for your requirements in our following product categories: Injection moulding machines with toggle lever or hydraulic clamping unit, also available as dual-platen (two-plate) injection moulding machines, rotating two-component injection moulding machines, two-colour injection moulding machines, and various designs of vertical injection moulding machines. Application examples include PET preform, PVC/CPVC pipe fittings, optical lenses, thermosetting plastics such as BMC and phenol material.
PAVIPLAST S.A.

Greece

PA.VI.PLAST. S.A. was established in 1996 at the industrial area of Patras. The industry produces plastic packing crates, plastic disposable boxes for rural and industrial use, which are manufactured by mold infusion (injection moulding products).In all our products, we apply complete qualitative controls not only during in the production process, but also during the packing and storage processes. Measurements of material resistance are realized in the company’s laboratory, however, some of them are also examined by the University of Patras and by private specialized laboratories. Our company is certified with the International Model of Production [EN] ISO 9001: 2000, and has secured and applies the System of Environmental Management according to the model EN ISO 14001: 2004. In 2003, PA.VI.PLAST. S.A. was honored with the International Reward for the Technology and the Quality International Award for Technology and Quality 2003.
PACOSAR SERVICES

Romania

Pacosar Services is a provider for raw material and injection moulding machines for in the thermoplastic industries in Romania. - Exclusive distributor in Romania for JM Polymers : * Mineral fillers : Calcium carbonate and Talc (CACOLIN®, TALCOLIN®) 70% to 82% + PE/PP/PS... * Nucleating Agent : Rapid Inject® for PP and HDPE. * Additives : Antiblock, IR, Processing Aid, Purging/Clean agent... - Sales representative for Bole in Romania (70To to 7000To) * Hydraulic Injection Moulding machine, * Electric Injection Moulding machine, * Two Platen Injection Moulding machine, * Glass and Carbon Finber Injection Moulding machine Plastic industries : Injection, Extrusion, Thermoforming and Injection industries.
YVES ALLAIN AEROSPACE CONSULTING YAAC

France

Technical parts in Plastics injection and injection molds for all polymers loaded or not from 0.01g to 3.5kg. Elastomers , rubber, silicone Seals NBR, HNBR, EPDM, PEROX, VMQ, PVMQ, FCM. Washers, Bellows, collars, DIN 3869, membranes, V-seals, Frames, bushes, bumpers, moulded parts according to drawing plastics extrusion and compression Mechanics: machinig and turming parts : all material metal and plastics. cutting gears spline shafts Mechanical engineering CAD CAM on Catia V5 V6 appication: automotive, railways, medcial, connectis, electronics, heating, telecom, www.yaac-industries.com www.riverplast.com www.pacific-rubber.com wwww.robecchi.it
WALONA - TODOROV CO

Bulgaria

Walona company was established in 1989 in Sofia city, Bulgaria with all private capital.We have injection moulding machines for production of plastic parts and moulds to produce. Most of our production is loaded with a matrix and plastic details by the requests of our clients. We work with sole traders and companies from all our country. We can give you an assistance for design and make a matrix with the desired form. We have own production and work with materials supplied by the customer. We have highly qualified personnel with extensive experience in manufacturing.We have potentiality and willingness to solve your specific technological problem in the special field which we are working in.Since the beginning of 2011. company is certified by international quality standard ISO 9001: 2008

QIAOJIN STEEL TRADING CO.,LTD

China

We are large special steel distributor in South China, we cooperate with more than 20 large national steel mills and many other steel mills to supply all of our key product ranges. We mainly focuses on the following ranges: 1. Cold work steel D2, D3, O12. Hot work steel H13, H113. Plastic mould steel P20, 718, 738, 2316, 2083, 2085 4. Structural Steel and alloy steel C45, 4140, 43405. Carbon Steel A36, SAE1045 In the style, we can provide steel products in flat bar, round bar, plates, large block in raw material, also we can provide fine material and heat treatment according to customers' dimension and precision requirements.
REP INTERNATIONAL

France

Supplier of solutions for the rubber and other polymers industry, REP international manufactures and markets rubber injection and compression machines. The REP company has been selling injection molding machines since 1948. Very early on, REP understood the importance of polymers and elastomers to industry and decided to specialize in the rubber injection technology. Our advantages ? Exclusive solutions and an international network of sales and aftersales agents. Our core knowhow? A high-technology range of vertical and horizontal rubber injection molding machines. With over 60 years experience of building rubber injection presses, the REP GROUP now has an extremely broad understanding of rubber molding. We put our know-how to work for you! Join the community of thousands of users in the world who have chosen authenticity with REP injection molding machines!

All the products for "moulding of plastic materials"

V210 Model

V79

Website See all products
NSB, LDA

Portugal

The company NSB, LDA, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the moulds for plastics and rubber industries. It is based in Leiria, Portugal.
DERCO MOULD ENGINEER

China

The company DERCO MOULD ENGINEER, is a Distributor, which operates in the Injection moulding of rubber and plastic industry. It also operates in the manufacture of moulds for plastics, and Dies and moulds industries. It is based in Shenzhen, China.
TEP - FÁBRICA DE PLÁSTICOS TÉCNICA E PRECISÃO

Portugal

The company TEP - FÁBRICA DE PLÁSTICOS TÉCNICA E PRECISÃO, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the design of moulds for plastics, and plastic packing accessories industries. It is based in São Domingos De Rana, Portugal.
SUZHOU OZNO GLASS MOULD ., LTD

China

We are supplier specialized in the moulding sector in china. We provide you with all type of plastic moulding, blow and/o injection mould, glass mould for bottles, jars, food containers, perfume containers, medical bottle containers according to your design o samples.

Find quotes for

Filters

Results for

Distributor - Moulding of plastic materials

Number of results

26 Companies