Results for

Plastic material processing - France

41 Companies

82 Products

Product recommendations

Germany

Hedgehog fingers/ Hedgehog mats/ Hedgehog bands

Germany

China

Germany

See more products

BREDLAK SAS

France

BREDLAK is a trading company based in North of France dealing with recyclable materials including plastics, papers and metals. We buy and sell PP, PET, HDPE, LDPE, PVC in all forms - films, scraps, lumps, powder, floor sweep, granules, bales, etc. as well as OCC, motor scrap, cast iron, etc. BREDLAK buy & sell materials in full loads of 40'HC containers & tautliners. We organize logistics worldwide and work on FAS, FOB, CFR and CNF basis. Since 2017, BREDLAK has established partnerships in USA, Europe and Asia, providing transparent service and consistent quality to our clients around the world, and continues to solve our toughest plastic and paper recycling challenges.
TOP CLEAN PACKAGING GROUP

France

The company TOP CLEAN PACKAGING GROUP, is a Manufacturer/ Producer, which operates in the Plastic material processing industry. It is based in Peschadoires, France.
SPD

France

The company SPD, is a Distributor, which operates in the Plastics - industrial products industry. It also operates in the Granules for plastics, plastic material processing, Granules for plastics, thermoplastic granulates, and Plastics - raw materials industries. It is based in Paris, France.
SIPLAST

France

The company SIPLAST, is a Manufacturer/ Producer, which operates in the Plastic material processing industry. It also operates in the Plastics - industrial products, Moulds, plastic and rubber industry, injection moulding of plastics, Plastics - industrial products, and Moulds, plastic and rubber industry industries. It is based in St Germain Laprade, France.
AJP

France

The company AJP, is a Service Provider, which operates in the Pulp industry. It also operates in the Aluminium coatings, Plastic material processing, systems, machinery and equipment for paper and cardboard finishing and treatment, paper rolls, Aluminium coatings, and Plastic material processing industries. It is based in Vieux-Condé, France.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ACPM

France

ACPM, located in Hauts-de-France (Nord-Pas de Calais), specialises in injection moulding of thermoplastics and injection or compression and transfer of thermosetting composites. Since 1996, ACPM has specialised in processing thermosettable (melamine, DAP, epoxy, phenolic, bakelite) and thermosetting composites (BMC and SMC) using injection, compression and compression transfer. ACPM is a leading French name in these technologies and processes. ACPM is also and expert in injection of thermoplastics. ACPM processes over 50 different materials. From everyday plastics such as PP, PE, ABS and POM, to more technical thermoplastics such as PA, PC, PPS, PSU, PEI and PEEK. Thanks to its outstanding expertise, ACPM is also able to guide you to replace your steel or aluminium parts with thermoplastic parts, for example to save weight in the aviation industry. ACPM is the perfect partner you have been looking for. ACPM is ISO 9001 v.2015 and ISO 14001 certified. Continuous improvement is central to our company's culture. Our values, which include confidentiality, transparency and expertise, make ACPM a key partner in its clients' value chains. Feel free to contact us for more details!

All the products for "plastic material processing"

Thermoset injection moulding

Website See all products
USIPLAST FRANCE

France

The company USIPLAST FRANCE, is a Manufacturer/ Producer, which operates in the Plastics - industrial products industry. It also operates in the Plastic machining, plastic material machining with machine-tools, machining of parts, and plastics processing industries. It is based in Quesnoy-Sur-Deule, France.
PRO COUPE INDUSTRIES

France

The primary purpose of PRO'COUPE Industries is to supply industrial Blades & Cutting Tools. Our expertise extends to a wide variety of areas such as food processing, packing and packaging, plastics and paper processing. In the space of over 20 years, PRO'COUPE Industries has developed from being a simple supplier to being an expert in cutting and related products. PRO'COUPE Industries carries a permanent stock of blades & cutting tools, sealing joints and hot platens for your packaging or processing machinery. Recent developments of new materials and coatings ensure that the products we sell offer constantly increasing quality. The choice of tooling is essential, so before you consider integrating a cutting station, call on the skills of PRO'COUPE Industries to discuss the specifications and construction of cutting tools, cutters and blades that will enter your manufacturing process.

Website See all products
MDP TEAM

France

MDP TEAM is recognized for the extent of its know-how and its processes, as well as for its co-development capacities mainly in the field of injection, overmolding and assembly of plastic components, complex plastic or metal assemblies or sub-assemblies. MDP TEAM has become a specialist in “original material" prototypes thanks to its expertise in aluminum and steel molds. MDP TEAM supports its customers through permanent innovation. Its know-how in the control and production of its own molds gives it independence, technological excellence and great reactivity. MDP TEAM produces plastic and metal components and assemblies in small and medium series within very short lead times. Our Know-How : - Design and production of aluminum and steel molds -Small and medium series injection - Prototype injection -Assembly of semi-finished and finished plastic or metal components -Design and production of plastic and metal components -Quality Monitoring – Metrology – Mold Flow Our Results : -220 molds per year -Very short lead times : up to 2 weeks for obtaining molds and first prototytpes -Injection and assembly series of 100 to 1 000 000 components Our strengths : -An expert and dynamic design office in co-development with our customers -Expertise in plastics and aluminums -Expertise in 4 and 5 axis machining -Responsiveness and flexibility -Competitiveness and Confidentiality -An organization in Lean Manufacturing -A 3D scan service

All the products for "plastic material processing"

Injection and Assembly in Small and Medium Series

See all products
INSERCO

France

INSERCO, the assembly systems specialist, designs and distributes innovative fixing and assembly systems used in all forms of manufacturing industry. Today, the company has also forged a reputation for its electronic component fixing systems.From single parts to complete assemblies, INSERCO supplies solutions that are innovative and cost-effective. Plastic fasteners: we hold large stocks of inserts for plastics based on our long experience of all aspects of the plastics industry. From plastic injection to rotational moulding, we have the right insert to suit the installation process: hand, heat, press, over-moulding. Inserts for thin sheet materials: the range of rivet and clinch nuts for thin sheet materials that we hold in stock is ideally suited to the sheet metal processing industries.Our nuts, studs and standoffs make it possible to create very strong threaded fixing systems. We hold large stocks of fixing components so that we can meet your needs as rapidly as possible.

FOLIOPLAST

France

FOLIOPLAST, a company that has specialized in extruding plastic since 1955, makes plastic tubes and shapes from customer drawings for industrial applications. We can manufacture sections ranging from 0.3–75 mm. Folioplast processes common materials such as PE, PP, PVC, ABS, etc. as well as engineering plastics such as POM, PA, PUR, PEI, PES, SEBS, PC, etc.In addition to plastic tubes and sections Folioplast extrudes extruded plastic rush matting for short-run series or prototypes in a range of materials to specifications. Our expertise based on over 60 years' work in the sector and highly engaged teams enable us to satisfy the requirements of the many projects handled by us. We attach great importance to the co-design dialogue we have with our clients.
CLEXTRAL

France

On the strength of its expertise in twin-screw extrusion technology, Clextral, a division of the Legris Industries Group, supplies turnkey production lines for its three main markets: Food & Feed: processes for breakfast cereals, snacks, food ingredients, protein fibration, products for pets and fish farms, couscous, pasta. Green Industries: processing of biosourced raw materials such as paper pulp for banknotes, biodegradable packaging, polymers reinforced with natural fibres, horticultural fibres, biofuels, biorefined products, technical plastics. Powder Industries: leading-edge solutions for manufacturing innovative powders and using much less energy. Clextral has been designing & manufacturing high precision DKM dosing pumps for the energy & chemicals markets for 50 years. We are present in 5 continents and provide services to our clients in 89 countries.

Product recommendations

China

Germany

Turkey

Household Appliances (Plastics Technology)

Germany

See more products

JFILMS SEAUX

France

Welcome to JFILMS, a plastics processing company that has been based in Grandris in the Azergues Valley (Rhone) for more than 40 years. JFILMS specializes in making PROTECTIVE FILMS AND TARPAULINS for the construction sector and PLASTIC BUCKETS for the agrifood, farming and industrial sectors. We aim to: Promote and develop film and bucket manufacturing in France. Our philosophy: To be attentive and responsive, take in your particular and specific needs, work out solutions, adapt to implement them and quickly satisfy your request. Special attention is paid to the manufacturing quality of our products, from raw materials procurement to delivery of the finished product (reels, rolls or buckets).
VEXIN POLYMERES

France

Vexin Polymères for small and medium runs of bespoke injection moulded engineering plastic parts. From 100 to several thousand parts manufactured with suitable tooling. From engineering plastics processing to elastomer processing. Manufacturer of engineering plastics: POM, PBT, PC, PA, PPS, ABS, PEEK... Manufacturer of elastomers: SEBS, PVC, TPU, TPE...Vexin Polymères designs and injection moulds plastic technical parts. With regional, national and international partnerships, Vexin Polymères can offer you a global service as regards choice of materials, mould maker profile and the finishing (assembly, painting, welding, prototypes, pre-series, end of run, moulding, over-moulding, silkscreening & so on). Vexin Polymères works for the following sectors: para-medical, drinking water treatment, aeronautics, railway, electronics, connector industry, heavy goods vehicles...QUALITY: ISO 90012008.
QUALITRIPLAST

France

QUALITRIPLAST is a company specialised in plastic recycling. We buy and recycle industrial scrap (from thermoforming, injection sprues, elimination). We provide a wide range of crushed and granulate plastic (ABS, PS, PC, PMMA, PVC, PE, PP) for the different plastic processing sectors (injection, extrusion, calendering). QUALITRIPLAST is fully equipped including with several crushers, different separating systems, as well as an infra-red close optical sorting line. We can separate assemblies containing several different types of plastic, as well as complex dual-materials. We ensure full traceability for our recycled materials from the supplier to the client. We have for many years been providing them with support for their new recycled plastic products and are always attentive to help them achieve their projects.
GRAVOTECH

France

For over 70 years, Gravotech has been the global leader for laser, dot peen and scribing engraving and permanent marking solutions. Gravotech was born in 2008 from the merger of Gravograph, Technifor and Type 3, and unified under a single brand in 2020. We design, manufacture and distribute dedicated solutions (machines and software) for personalisation applications (jewellery, gifts...), signage (informative, directional, industrial), or traceability (automotive, medical, aeronautical...). The Gravotech group is present in over 50 countries with 15 subsidiaries, over 200 distributors and 3 production sites. As a world leader in permanent marking technologies, we use our expertise to develop and market high-performance, industrial equipment that meets the needs of our 60, 000 customers worldwide. We also develop software and consumables (engraving materials, substrates, accessories). We offer a wide range of products: - laser engravers and laser cutters - laser marking stations - integrated laser machines - mechanical engraving and cutting machines - dot peen marking station - dot peen and scribing machines - software solutions for machine control - engraving materials and consumables

All the products for "plastic material processing"

Engraving material Gravoglas™ 2-plex™ Surface

Laser engraving material Gravoply™ Laser

Laser engraving material Acrylics

Laser engraving material Gravoply™ Ultra

Laser Engraving Materials Gravoply™ 2

Website See all products
PROCESS THERMOPLASTIC

France

Specialist in thermoplastic injection, we focus all our know-how on helping your projects and your business sector. Our teams are at your side from the moment your idea is born right through to producing your parts. We carry out every stage: design, prototyping, mould-making, plastic injection, decoration, quality control and delivery. * 22 injection presses: - single material presses from 25 to 3, 200 tonnes, - bi-material presses from 160 to 1, 500 tonnes. * An assembly and decoration facility (paint, pad print, screen print, ultrasound welding, hot marking), * An ISO 7 controlled-atmosphere room to guarantee high quality standards, * 300t laminar flow bi-injection press for IML and IMD applications, * Production capacity in Slovakia, * We work with a CERO mould-maker to develop tooling and for repairs and maintenance.We work with all sectors (medical, food, automobile, agriculture, construction, electrical appliances, rail, leisure) and are ISO9001 certified. Customer satisfaction is our priority. 10, 000, 000 parts produced annually.

Website
PLASTIC BILLAT

France

The company BILLAT, known today as PLASTIC BILLAT, was founded in 1973. For almost 50 years, it has specialised in the injection moulding of high-quality plastic technical parts for short and medium-sized product runs. We are the last remaining French company that manufactures automotive accessories under the BILLAT brand. We have a team of 36 employees and a total of 30 injection moulding machines, 10 of which are electric, operating 24 hours a day, 6 days a week. This organisation nous means that we can quickly meet our customers’ demands while ensuring top quality and premium service. All our activities are carried out on a single site, enabling us to maintain lead times with regard to maintenance and development. For further details, don't hesitate to contact us!

Website
RGF PLASTIQUE

France

The company RGF PLASTIQUE, is a Subcontractor, which operates in the Injection moulding of rubber and plastic industry. It also operates in the bi-material plastic injection moulding, and Processing of plastics industries. It is based in Pratz, France.
PLASTEXEL

France

The company PLASTEXEL, is a Subcontractor, which operates in the Boilerwork industry. It also operates in the Rubber and plastic - processing, Rubber and plastic - processing, plastics processing, Plastic work, and plastic material design industries. It is based in Les Echets, France.

DYNAPLAST

France

The company DYNAPLAST, is a Manufacturer/ Producer, which operates in the Plastics - packaging industry. It also operates in the Food packaging, Processing of plastics, sheets of plastic materials, and Food packaging industries. It is based in St Florentin, France.
AXIAL

France

The company AXIAL, which operates in the Rubber and plastic - processing industry. It also operates in the curving and bending plastic materials, engraving, milling, and certification industries. It is based in Florange Cedex, France.
PLATEX

France

The company PLATEX, is a Manufacturer/ Producer, which operates in the Plastics - industrial raw materials industry. It also operates in the Rubber and plastic - processing, Rubber and plastic - processing, and Plastic injection industries. It is based in Raon L'Etape, France.
ETS BOURGEOIS

France

The company ETS BOURGEOIS, is a Manufacturer/ Producer, which operates in the Rubber and plastic - processing industry. It also operates in the bi-material plastic injection moulding, and overmoulding industries. It is based in Bletterans, France.
DINAMIC EMBALLAGES

France

The company DINAMIC EMBALLAGES, is a Manufacturer/ Producer, which operates in the Rubber and plastic - processing industry. It also operates in the Injection moulding of rubber and plastic, Injection moulding of rubber and plastic, extrusion of plastic materials, and plastic capsules for packaging industries. It is based in Rombach Le Franc, France.
ATOUT PLASTIC

France

The company ATOUT PLASTIC, is a Manufacturer/ Producer, which operates in the Rubber and plastic - processing industry. It also operates in the Injection, plastics - machinery, Plastics - machines and material for industry, paint applicators for plastics manufacturing, plastics for plasturgy, Injection, plastics - machinery, and Plastics - machines and material for industry industries. It is based in Carquefou, France.
ARTOIS PLASTIQUES

France

The company ARTOIS PLASTIQUES, is a Manufacturer/ Producer, which operates in the Rubber and plastic - processing industry. It also operates in the Polyamide fibre - manufacturing, and Cutting of plastic materials industries. It is based in Houdain, France.
NP NORD

France

The company NP NORD, is a Manufacturer/ Producer, which operates in the Rubber and plastic - processing industry. It also operates in the Processing of plastics industries. It is based in Caudry, France.
UNION PLASTIC

France

The company UNION PLASTIC, is a Manufacturer/ Producer, which operates in the Plastics - industrial machinery and equipment industry. It also operates in the Injection, plastics - machinery, Injection, plastics - machinery, and Processing of plastics industries. It is based in St Didier En Velay, France.
PLASTICS 44

France

The company PLASTICS 44, is a Subcontractor, which operates in the Rubber and plastic - processing industry. It also operates in the Plastic machining, and Processing of plastics industries. It is based in Le Loroux-Bottereau, France.