Results for

Plastics manufacturing - Germany

114 Companies

182 Products

Product recommendations

Netherlands

Turkey

Building Technology (Plastics Technology)

Germany

Romania

See more products

HA-WI KUNSTSTOFFE GMBH & CO. KG

Germany

HA-WI Kunststoffe GmbH & Co. KG in its present form was formed in 1998 by the merging of KURI Kunststoff Verarbeitungs GmbH, founded in Bonn in 1959, and HA-WI Kunststoffe GmbH, located in Bad Laasphe since 1972. The two companies were merged at the Bad Laasphe site and both product ranges at that time were combined and expanded in line with market requirements. At the same time, the areas of technical items and quick-clamping systems have been continuously expanded and a quality management system has been implemented alongside state-of-the-art technology. The result is our current company with the three product divisions: Standard components, technical parts and BAKRA® quick-clamping systems

Website
FRANZ FISCHLER GMBH & CO. KG

Germany

For more than 50 years, plastic moulded parts and abrasives have been at the forefront of our company. In the course of this, maximum precision and a highly innovative spirit have come to distinguish our individual solutions and leading products. Our guiding principle is to put the customer at the centre of our business. Your satisfaction alone is the basis of our success. For the long term, across all products and services, our commitment to you always applies: We will work together with you as your partner. You will receive a tailored solution specially developed for you that suits your individual requirements. You will benefit from leading products and high profitability as we continually strive to improve our quality and throughput times. To save energy and reduce consumption of raw materials, we manufacture using state-of-the-art technology while continually optimising our processes and products.

Website
WEBER GMBH & CO. KG, KUNSTSTOFFTECHNIK UND FORMENBAU

Germany

The Weber Group is a development supplier and system partner providing sophisticated plastic solutions for customers in the automobile, building technology and household appliance sectors. With approximately 1, 300 employees, this medium-sized family business develops and manufactures products at sites in Germany, Poland and China. In addition to its core business of plastics technology, wezi-lit sealing putties have been an additional area of operations of the Weber Group since it was founded in 1949. The company is certified DIN ISO 9001, IATF 16949, DIN ISO 50001 and DIN ISO 14001. Calling on its expertise and passion, the day-to-day mission of the Weber Group is to create fascinating ideas and exceptional solutions offering customers outstanding benefits.

All the products for "plastics manufacturing"

Building Technology (Plastics Technology)

Website See all products
BECHTOLD & SOHN GMBH & CO. KG

Germany

A name that has sounded good since 1885. It is not a sheer coincidence that Bechtold & Sohn can look back on a long and successful history. Now in its fourth generation, the family-run company will continue to remain on course with the same values held by master woodturner Johann Peter Bechtold when he founded his company back in 1885: Quality, continuity, personality and dedication. These virtues form the cornerstone of the company philosophy and have enabled Wolfgang Bechtold and his 150 employees to gain an excellent reputation among industrial companies, predominantly in the fields of pharmaceuticals, medicine and chemistry. Enthusiasm for plastic and technology Plastic has been the material of choice at Bechtold & Sohn for more than five decades now. This results in an enormous wealth of experience which our highly skilled employees use to produce plastic parts for well-known customers in three-shift operation.

Website
SKS METAPLAST SCHEFFER-KLUTE GMBH

Germany

SKS metaplast: Your point of contact for construction plastics, extrusion & masks. With a global reputation as an innovative manufacturer of air pumps and mudguards for the bike market, SKS is now applying its expertise in the field of plastics processing to other sectors: The automotive, sanitary, home services, construction and electrical industries. Even in the early stages of each project, we see ourselves as a competent and active service partner to help customers optimise and achieve their objectives. From the initial concept, through construction, analysis of components, selection of materials, and manufacture of prototypes, to testing of components and quality control, we are a partner who knows its trade. SKS produces high quality plastic parts with the knowledge that they can be used to save energy and raw materials and make a contribution to a sustainable quality of life. Since 2020, SKS has also been producing reliable disposable face masks in Germany.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

CARGO PLAST GMBH

Germany

Cargo Plast® GmbH is a medium-sized independent company. For more than ten years, we have been producing and selling transportation and storage systems as well as repairing and welding plastics. The prowess of our company can be traced to our multifaceted range of products. We offer innovative custom solutions for special applications. In addition to new products, we also provide a repair service for plastic boxes and plastic parts, either at our company's base or directly at your site. Our company is characterised by individual consultation, product quality and punctuality in delivery and other appointments. Competent processing is the aim of our work. Our office provides customers with the best possible service at all times, from consulting, planning and construction through to order management, organisation of transportation and goods tracking. Proper and professional repair of plastic boxes and plastic parts of all types by means of various plastic welding processes.

Website
RENA KÜCHENHELFER GMBH

Germany

Based in the northern Black Forest, we are one of the leading manufacturers of high-quality household aids for the kitchen. We guarantee high quality standards through an extensive range and the latest techniques. Our products range from baking and cooking, through serving and right up to barbecuing. We manufacture our products in Germany with a team of 20 people. RENA Küchenhelfer GmbH offers you expert and reliable support. We have experience in the development of new, innovative products, which we accompany all the way to market maturity. Our vision: Being one of the leading manufacturers of plastic and silicone kitchen aids, whose products enjoy great popularity and can be found in every household. Our mission: Manufacturing high-quality and functional kitchen aids with optimal cost-effectiveness guarantees satisfied customers and long-lasting success.

Website
WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Website See all products
GRÜNING & LOSKE GMBH

Germany

Grüning & Loske GmbH stands for a successful combination of products and services. Good ideas, the latest technology and many years of tradition as a technical trader, we add to innovative solutions which all have just one objective: The optimisation of your procurement process. This also includes outsourcing concepts with C-Parts management and standardisation measures for industry and trade, along with the creation of rationalisation concepts in the scheduling and logistics sector. You can rely on our awareness of responsibility and quality – from the initial conversation through to on-time delivery. Our vision: We want to be the service leader in day-to-day activities; we want to be the most customer-oriented team in technical trade; we want to be the most competent contact for our customers; we want to achieve maximum economic success with our activities for our customers and for Grüning & Loske.

Website See all products
DRESSLER GROUP

Germany

About the Dressler Group – the grinding authority. Since it was founded in 1978, the Dressler Group (DG) has specialised in the grinding and finishing of plastics for all key industries, gaining comprehensive certification along the way. DG has always been active in research and development, at the company's own Innovation Lab and Technical Centre as well as in external cooperation with universities and customers. DG offers all types of grinding, and complete warehouse, packaging and shipping logistics. Test grindings can be carried out from just a few grams to individually specified large quantities, always with absolute reproducibility and just-in-time production. A dedicated contact person at Dressler Group Customer Service (DGCS) provides access to all DG services. The subsidiary Godding + Dressler GmbH also has AEO C and S status. Our vision: "always the right powder for you! "

Website See all products

KUNESA GMBH

Germany

Every project has its own requirements, every customer behind it has unique expectations, every approach therefore calls for individual measures and every step of the process must be focussed on the goal. Our wide range of production options for metal, plastic and wood processing, our own in-house surface technology and paint shop for working with all varnish types as well as the technical innovations in planning, ranging from virtual reality to prototyping allows us to develop and produce individual and system solutions in a targeted way, using a wide variety of materials. For more than 100 years, we have been offering you, in addition to our expertise as a full-service interior outfitter and product developer, the whole range of services for an all-round successful result - individual and customised, all delivered from a single source and in-house. We know how best to respond to your requests, to harmonise them with optimised workflows and to carry them out professionally.

Website See all products
J. SCHWARZ GMBH

Germany

The company Josef Schwarz was founded in 1978. Thanks to a flexible market orientation and a needs-based focus, the range developed quickly from collapsible boxes to plastics processing and classic printing procedures. The company has been certified in accordance with DIN ISO 9001 and 14001 since 2006. J. Schwarz is a verified and recognised training company. The comprehensive processing systems for plastics are among the most varied in the sector today. Thanks to the vertical range of manufacture, range of materials and highly extensive supply, production by J. Schwarz is always quick and flexible. Our in-house fleet ensures on-time delivery. Our own standards for quality, reliability and trustworthy conduct has made us a consistently strong and reliable partner. The owner-managed family business remains loyal to its principles, even in its second generation.

Website

Product recommendations

France

Germany

China

Joints Interior Components - Technical Parts

Portugal

See more products

KIRSCH KUNSTSTOFFTECHNIK GMBH

Germany

KIRSCH Kunststofftechnik was founded as a family business in 1985. Motivated by the motto of "everything from a single source", we make it possible to produce simple parts through to complex ready-to-install assemblies including finishing. KIRSCH Kunststofftechnik is a leader in surface technology and treatment with a focus on the machine construction, automotive and medical industries. We continue to impress our customers at national and international level with our experience, service and customer support. Together with you, we developed into a specialist in plastic processing – which is why our mission is to take a step forward with you and innovatively design the plastic of tomorrow in collaboration with you. Your ideas and requirements are brought to life in the highest quality, which is why we are also happy to advise you in creating new products that are to be developed based on your drafts and plans.

Website See all products
REINLE GUMMI & KUNSTSTOFF GMBH

Germany

Ideas in good hands. Since 2000, Reinle Technik GmbH has been certified in accordance with the DIN EN ISO 9001 quality standard. We have been providing our partners from the industrial engineering, automotive and electrical industry with tailored solutions for a number of years. With state-of-the-art production techniques, flexibility, speed and expertise, as well as the commitment of all employees, ideas and requirements become precise technical parts made of rubber and plastic. For you, we manufacture and process: Stamped parts – profiles – formed parts – acrylic finished parts – plastics – elastomers – cellular materials – acrylic glass. We supply you with technical building products: Installation foams for assembly, thermal insulation and sound insulation measures, silicones for special applications, backing tapes, cork stacking discs.

Website
RECYTEC GMBH

Germany

RecyTec GmbH is a diverse, family-run company that has been processing plastics and other valuable materials for over a decade. Our aim is to reprocess waste into reusable raw materials through innovative processes, thereby conserving valuable resources. Our versatile machinery enables us to perform numerous recycling steps at our sites. Our in-house container service is perfectly adapted to our operational area. We handle the entire disposal process for your production facilities, even under difficult conditions. In addition to disposal, we can also supply you with any secondary raw materials or loading equipment you may require. We are also happy to share our skills in this field, and contracts can include processing of recyclable materials. Our main business focus is processing hard plastics, Styrofoam (EPS)/Styrodur (XPS) and old wood to a range of recyclates and products. All of our business processes are certified and subject to strict quality and safety controls. We are approved according to the German Federal Immission Control Ordinance, certified as per the German Ordinance on Specialised Waste Management Companies and a final receiver installation in line with the German Packaging Act. Our daily processing operations include hard plastics such as HDPE, LDPE, PP, PS, PVC, PET, GPPS and PA.

Website
HELLER KUNSTSTOFFE GMBH HERBORN

Germany

Manufacture and sale of plastic profiles and tubes for the automotive, furnishing and electrical industries, mechanical engineering, air conditioning, window construction, the sanitary sector and structural and underground engineering. Manufacture of user-friendly and economical end products such as handle profiles, fitting profiles, ladder profiles, drawer profiles, door seal profiles, edge veneer, bench profiles, window profiles, roller shutter profiles, abutting edge profiles, handrail profiles, cable ducts, ceiling profiles, flooring profiles, wearing strips, angle profiles, edge guard profiles, U-shaped profiles, cover profiles, anti-rattle solutions, weatherstrips, flat sections, clamping profiles, hollow profiles, sealing profiles, joint profiles, filler profiles, shower cabin profiles, sanitary profiles, boat profiles, round cord, tubes, rings and much more at two productions sites.

Website
EWOQE GMBH & CO. KG

Germany

EWOQE GmbH & Co. KG is your innovative partner in additive manufacturing and prototype construction, specialising in technical plastic injection-moulded parts and tailored solutions for vehicle construction, medical technology and beyond. With a focus on rapid prototyping, rapid tooling and 3D printing technologies, we offer a wide range of services, from 3D designs to small series production. Our expertise extends to the optimisation of component functions and throughput times in order to boost your innovative strength and save costs. Our aim is to efficiently solve challenges such as missing components or a lack of production capacity, and to offer you tangible added value. We see 3D printing as a tool for promoting innovation that fits perfectly into your production processes. From brainstorming to realisation, we support you with custom advice, and use our comprehensive expertise to successfully implement your projects. At EWOQE, we pride ourselves on achieving outstanding results every day, and see ourselves as your reliable B2B partner. Contact us at info@ewoqe.com to find out how we can contribute to the success of your next project with our expertise in 3D printing and additive manufacturing. Come to us to discover the unlimited possibilities of 3D printing for your product development.

Website See all products
FRIEDENSTAB KUNSTSTOFFTECHNIK GMBH

Germany

Do you have an idea? We have just the solution for you. Together with you, we work out the right overall package, and support you from development to series production of plastic components! Our core skills: Plastic products made using injection moulding and extrusion processes and all related services with committed and reliable customer service "Made in Germany". Since 1949 we have been a family business, and are now in our fourth generation. Thanks to fair treatment of our customers and suppliers, we can be proud of a number of partnerships stretching back several years, and will put the utmost effort into maintaining these in the future. We stand for commitment and quality that's "Made in Germany". Sustainability is an especially important subject for us. For this reason, 100% of the electricity we use is from renewable energy sources. Our energy requirements are met by certified hydropower and our own photovoltaic systems (180kWp)

See all products
MEDING GMBH

Germany

Meding GmbH is a specialist in plastic technology and produces customer-specific products for many sectors, particularly for medical technology. The company, based in South Westphalia, Germany, uses state-of-the-art production facilities and techniques to manufacture challenging items in one-, two- and three-component injection moulding procedures. Our injection moulding machines are equipped with state-of-the-art five-axis handling devices. Production can also be carried out in cleanroom conditions (class 7). Since investing in an injection blow moulding machine, it is now possible to produce bottles and jars for you. Quality is crucial at Meding, demonstrated by certification in accordance with EN ISO 13485: 2012 and DIN EN ISO 9001: 2008. We can offer you everything from a single source, from product development to design, 3D printing of a prototype, tool manufacturing, series production in various injection moulding procedures, through to printing and packaging, all with a high level of quality and reliability
KURZ KUNSTSTOFFE GMBH

Germany

On a contract basis, we produce hybrid components and injection moulded components in small-scale and large-scale series production, which fully meet the requirements and specifications of our customers. Thanks to our highly skilled and trained workforce, we can also optimise customer-specific tools and produce completely new tools. We provide in-depth advice, in particular with regard to material selection and part geometry. It goes without saying that we ensure the efficient deployment of our extensive machinery: Our 56 injection moulding machines (2K, 3K and round table), various handling systems, laser inscription devices and our innovative 3D printer enable us to produce the highest quality for you. Use our contract production service to balance out order fluctuations in your business and remain adaptable in the face of market changes.

CODEMAC GMBH

Germany

We have chosen to specialise in trading classic sport boats – known as runabouts – from the 1970s and 1980s. Our main focus here is on Gastron/Glastron Carlson and Hammond boats, Chris Craft, Slickcraft and the like. We also offer everything that accompanies these wonderful classics, like US trailers, classic outboards, vintage instruments and fittings. Furthermore, we refurbish all components – with a gel coat, a Metalflake finish, upholstery, foliation, etc. Last but not least, we reproduce logos and emblems that are no longer available, cast aluminium fittings such as prows, and manufacture acrylic glass windscreens.
LABOR- UND REINRAUMTECHNIK ARNSDORF GMBH

Germany

On 1st July 2018, the sales and assembly capacities of the laboratory technology divisions from VARIALUX GmbH and Rotter Reinstraumservice were separated from GK Sondermaschinenbau GmbH and merged into Labor- und Reinraumtechnik Arnsdorf GmbH. This made it possible for us to offer even more efficient processes and more varied products, and consequently to fulfil the requirements of our customers even better. Our water baths and thermostats are available as standard equipment or special versions. As a contract manufacturer, we guarantee to our customers that we will execute all orders with great precision and reliability. In collaboration with selected qualified partners, we process all materials relevant for clean rooms, pharmacies and laboratories. We have specialised here in the production of demanding individual parts. As a module supplier, we install parts and components of various suppliers on installable modules for our customers.
DA KUNSTSTOFF GMBH

Germany

DA Kunststoff specialises in manufacturing and processing the highest-quality plastic parts. In doing so, we rely on precise manual work, extensive specialist knowledge, decades of experience and – above all – the skills and dedication of our staff, who work to meet these requirements as consistently and practically as possible every day. Precisely moulding plastic – this is our core competency and our passion. Thanks to continuous further development and innovation, we find novel solutions for all fields of application. From planning to production and delivery, we work flexibly, quickly and in accordance with the toughest quality standards. In our modern building complex with on-site production hall and office wing, 30 employees use 23 injection moulding machines to produce plastic parts in batch sizes ranging from the smallest to the largest, as well as assembling complex modules and systems.
RAUMEDIC AG

Germany

RAUMEDIC AG is a global development partner and manufacturer of tubes, precision moulded parts and catheters as well as assemblies and systems for the medical technology and pharmaceutical industry. To achieve this, all thermoplastic polymers and silicones are manufactured to medical quality standards. Furthermore, RAUMEDIC develops and produces high-precision pressure measuring systems and microchip technology for therapeutic areas such as neuromonitoring, urology and traumatology. With its own research and development department, RAUMEDIC creates highly sophisticated customer-specific products. RAUMEDIC has a global distribution network and is represented by its own companies in selected markets. With over 60 years of expertise in the fields or extrusion, injection moulding and assembly, RAUMEDIC is best-placed to turn your customers' ideas into well-engineered product solutions.
GEORG HARTENBACH TECHNISCHE DREHTEILE AUS KUNSTSTOFF

Germany

We have been manufacturing plastic turned parts of all kinds for over 30 years. Our production ranges from 4–60 mm parts produced on an automatic lathe to 120 mm turned parts on conventional lathes. We manufacture quickly, reliably and with precision. Our products are used in mechanical and electrical engineering, the chemicals industry, the furniture industry, lighting technology, plant and apparatus engineering, environmental technology, water treatment, etc. We process POM, PA6, PA6.6, PA6.6 GF, PVC, PVDF, PEEK, PTFE, PE, PP plastics, amongst others. We are partners and manufacturers for small, medium and large series production. Production takes place in accordance with an original drawing, sketch or sample. Please do not hesitate to contact us if you have any questions.
MAINTECH SYSTEMS GMBH

Germany

MainTech Systems is a medium-sized company based at a location steeped in tradition in the heart of Europe, in the Bavarian part of the international economic area of Rhine-Main. With more than 200 engineers, technicians, experts and qualified technical specialists, as well as a production area measuring 12, 000 m², we combine expertise and productivity into one efficient whole. Our industrial site is a testament to a tradition that stretches back decades: The site was founded in 1924 as a production facility for textile viscose for the company Vereinigte Glanzstoff-Werke AG. The manufacture of technical viscose began in 1938; this was used primarily in high-speed car tyres. In the 1950s, fibre production was expanded to include synthetic fibres such as polyester and polyamide. Since the 1970s, the site has been growing to become the most important European production site of high-quality yarns for technical applications.
IKS KUNSTSTOFF- UND STAHLVERARBEITUNGS GMBH

Germany

We are a medium-sized company based in the town of Ingelheim am Rhein in western Germany. Since the founding of the company in 1993, we have operated successfully in the fields of plastic, pipeline and ventilation construction. We have made a name for ourselves in the industry as a specialist for pipeline construction and plastic equipment manufacturing and offer a wide range of services. Not only do we provide "everything from a single source" for pipeline construction, we also have short lines of communication, thereby ensuring the reliable implementation of our solutions. Our hallmarks are high quality and reliability in pipeline construction, as well as in our other areas of business. It therefore goes without saying that we are also a certified specialist company in accordance with Section 19 of the German Federal Water Act (WHG) and a specialist company for welding technology. We pride ourselves on providing a good service, so we always listen carefully to our customers. If you have a question about our services, please don't hesitate to get in touch!
INOTECH KUNSTSTOFFTECHNIK GMBH

Germany

Our current expertise is based on more than 25 years of intensive work with plastic as a material and the dedicated work of our 500 employees. INOTECH acts as a successful system supplier for renowned customers in the fields of plastics technology and health and beauty. Our products are used in the automotive, telecommunications, mechanical engineering, medical technology and packaging industries. Furthermore, our first-class technologies, impressive innovations and targeted investments give our customers a clear competitive advantage.
SAXONIA GALVANIK GMBH

Germany

SAXONIA Galvanik is one of the leading international providers of metal-coated plastics with around 30 million galvanised polyamide parts and around 60 million single and multi-component parts each year. Many years of experience, the comprehensive process knowledge of the highly qualified employees and the use of four state-of-the-art large-scale plants guarantee outstanding results and further increase the value of the coated surfaces. In addition to daily production, SAXONIA Galvanik has also made a name for itself as a development partner. Thanks to our close cooperation with well-know customers, especially from the automotive sector, partners and institutions, the company has the potential and expertise to continue offering successful material combinations and solutions in future. With the help of over 400 employees, SAXONIA Galvanik looks after a large base of international customers.
ZEPPELIN SYSTEMS GMBH HENSCHEL MIXING TECHNOLOGY

Germany

Plastics manufacturer and forwarder: Zeppelin is a global leader in its markets with its turnkey systems for handling high quality bulk material. Plastics processor: In this demanding industry, Zeppelin is a technology leader in the cable industry for PVC treatment systems, compounding systems and systems for the manufacture of cross-linked cables (VPE). The complex tasks require extensive expertise to develop optimum solutions. Rubber and tyre industry: From raw material acceptance to storage and conveying technology, the weighing and metering of soot, silicate, oils and other additives and small components, through to the turnkey mixing hall, Zeppelin supplies complete systems from a single source. Food industry: Raw material acceptance, storage, extraction, conveying, processing, metering, mixing and controlling. We develop something unique in all areas.