Results for

Injection moulding of plastics

679 Companies

286 Products

Product recommendations

Turkey

Germany

China

China

See more products

STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
HODA, UAB

Lithuania

HODA, UAB is a company based in Lithuania specialized in plastic injection moulding since 1993. Over the years we became one of the biggest plastic injection moulders in the Baltic states with important production capacities. Our goal is to produce high quality products and meet our customers' requirements for a competitive price. At the moment our company operates with more than 70 injection moulding machines, which gives us flexibility to produce different sizes and purpose plastic parts from a fraction of gram up to six kilograms of mass. Our wide range of services includes mould tool manufacturing, plastic injection moulding, insert overmoulding, DC (dual- component) injection moulding, gas assisted injection moulding, thermoset moulding, plastic blow moulding, decoration, tampo printing, screen printing, wet painting as well as assembly and packaging. We deliver both in Lithuania and all around the world. We are proud to be certified according to ISO9001, ISO14001, GMP and IATF 16949 standards. Moreover, we constantly improve our management system to preserve the environnement in accordance with food safety regulations. Don't hesitate to contact us for more information !

All the products for "injection moulding of plastics"

PLASTIC INJECTION MOULDING

GAS ASSISTED INJECTION MOULDING

INJECTION MOLDING DESIGN

INJECTION MOLDING COMPANIES

CUSTOM PLASTIC MANUFACTURING

Website See all products
MATRIZ JUBILANTE UNIPESSOAL, LDA

Portugal

The company Matriz Jubilante created in 2019 works in the sector of molds and shapes Pet and inflation with a focus on the packaging industry - water industry, pharmacies, detergents and food. We combine technical expertise in the development of plastic products with the development of durable and high precision tools in our factory. Our goal is to become a reference in mold design in Portugal and to keep up with technological innovations.

All the products for "injection moulding of plastics"

On-demand plastic injection molding parts

Plastic injection product

Glass and plastic injection molding

Moulding

Injection moulded

Website See all products
PRO-MOULDS (MIDLANDS) LTD

United Kingdom

Pro-Moulds (Midlands) Ltd was established in 1993 to provide a complete toolmaking service to the plastic injection moulding industry! Ever since that day we have grown and adapted until now where we are widely regarded as one of the UK's leading toolmaking companies. Run by hands on and experienced directors, working with a highly skilled team of toolmakers, we have completed a large number of projects for some of the UK's leading companies. Precision and efficiency is key to our business, and it is this lean operation that has allowed us to grow at the rate we have for the last 25 years! We are experts in plastic injection moulding, tool repair, toolmaking and even laser welding! working to create a wide array of tools for large UK, and European customers. For more information about us, what we do and how we can help you, get in touch with us today! Our team would be more than happy to help you with your toolmaking, tool repair, injection moulding and laser welding requirements. Customer service is key to us here at Pro-Moulds, and we aim to ensure that every customer we work with is happy with the workmanship and the overall quality of the products!
WALONA - TODOROV CO

Bulgaria

Walona company was established in 1989 in Sofia city, Bulgaria with all private capital.We have injection moulding machines for production of plastic parts and moulds to produce. Most of our production is loaded with a matrix and plastic details by the requests of our clients. We work with sole traders and companies from all our country. We can give you an assistance for design and make a matrix with the desired form. We have own production and work with materials supplied by the customer. We have highly qualified personnel with extensive experience in manufacturing.We have potentiality and willingness to solve your specific technological problem in the special field which we are working in.Since the beginning of 2011. company is certified by international quality standard ISO 9001: 2008

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

MK TRADE

Finland

We are trading company in Finland. We have 10 years of international experience about mold manufacturing, injection molding and design - planning work. We can do the planning and realization from the beginning to the end, all we need is your idea of what you would need. The companies we work with have been in this industry for more than 30 years. Hence, they understand exactly what a complete solution should look like. Please contact us for further information and for your inquiries. Mesut Kaya
DEXPROM

Portugal

The company DEXPROM, is a Manufacturer/ Producer, which operates in the Moulds, plastic and rubber industry industry. It also operates in the Injection moulding of rubber and plastic, Moulds, precision, Injection moulding of rubber and plastic, injection moulding of plastics, and Moulds, precision industries. It is based in Maceira, Leiria, Portugal.
FERONYL

Belgium

The company FERONYL, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Plastic injection, moulding of plastic materials, and injection moulding of plastics industries. It is based in Mouscron, Belgium.
PYRAMIDS TECHNOLOGY CORPORATION

Taiwan R.O.C.

Pyramids has over 60 engineers, and over 230 staffs. We pride ourselves on doing thorough DFMs and helping solve problems BEFORE we go into production. Currently over 80% of our customer base is medical equipment ( and devices). So we have to be thorough and meet a higher standard. We are just finishing a 100, 000 sq. foot assembly and office building in New Taipei. We will have class 100, 000 clean rooms for assembly, ( as well as regular clean assembly area). Additionally we will have a class 10, 000 area for assembly and very specialized molding. ( we do a number of programs requiring 10 micron absolute filtration). --We are just starting up a state of the art Powder coating facility. As we do so many high gloss white ( medical) programs, we have had to go to all German equipment/ fully automated for cleaning, and painting. Our booths will have up to 98% powder recovery. Let us know if we can help on any future metal or plastic components/ sub-assemblies.
AD MOLD., LTD

China

AD Mold locate in Shenzhen of China, established in 2009, 50 employee with tool shop at 2, 000 square meters, focus on plastics injection mold-making & injection molding covering industries automotive, home appliances, electric-electronics, medical & Healthcare, packaging, construction, consumer products, agriculture, sporting goods, furniture etc; Mold Spare parts and Metal components are one of our services. Our team is comprised of experience mold designers, mold manufacturing personnel, quality control personnel. AD mold is specializing in building Multi-cavity molds, Complex Structure molds, Tight tolerance precision molds and High gloss molds.Main service: plastic injection mold, die-casting mold, rubber mold, metal components, plastic products, mold design service...

THE CHINA MANUFACTURER

Hong Kong

We are celebrating 30 years bespoke manufacturing in China for western companies (plastics, metals, electronics). We cannot be beaten on experience. These are our recommendations for successful contract manufacturing in China. As your factory in China, we provide one-stop China manufacturing solutions for all your bespoke component, part and fully-assembled China product, packaged ready for the shelf if required. We are accustomed to manufacturing - to customers' own designs - for sectors with exacting testing and certification standards. We are expert Chinese product manufacturers, and as one of the leading and most experienced China manufacturers, we offer a wide range of product and processes:
LORNNY PROTOTYPE LTD

China

Lonrry is one of the model production companies in China, focused on customers in different industries all over the world, our main business: SLA, SLS, FDM, product design, a variety of actual design mould, etc.Lonrry has a strong technical team, leading the same industry in technical support, providing customers with small quantities of high-quality, low-cost, rapid prototyping and manufacturing services, pushing your products into the market better and faster.Provide you with 7X24-hour one-stop service, accepting business、complaints and other requirements by phone, online counseling and e-mail.

Product recommendations

Turkey

China

Lithuania

Czech Rep.

See more products

HANTECH MOULD INDUSTRY CO.,LTD

China

Hantech Mold Industry Co., Limited is a leading manufacturer of injection moulds, blow moulds and die-casting moulds as well as metal components machining in south China. Founded in 1997, we specialize in the design, development and manufacturing of high-quality plastic injection moulds and injection-moulded products for the plastic industry worldwide. We possess high speed CNC machines, a precision mirror-EDM machine, slow wire-cut machines, milling machines and grinding machines in our mould workshop. In addition, we can also provide services like injection moulding, screen printing, hot stamping, painting and assembly. Our moulds and plastic or metal parts have been successfully exported to the U.S.A, Europe, Australia and Asia. Our company manages the entire operation including designing, mould making, testing, moulding, packaging and exporting. With this complete in-house service, we're your ideal partner for new product ideas.
HUIZHOU TECHWIN PRECISE PARTS CO., LTD

China

Techwin was established in 2003, and have passed ISO9001: 2008 quality management system certification. At present, we have two factories with more than 600 workers in Huizhou covering an total area of 22, 000 square meters. They are Huizhou Techwin Precise Parts Co., Ltd and Huizhou Techwin Precise Technology Co., Ltd respectively. 　Huizhou Techwin Precise Parts Co., Ltd, the only one of high tech company who has the R&D center in injection and mold industry in Huizhou. It has been focusing on the design and production of injection molds and precise parts for over ten years. Our major existing clients are well-known at home and abroad, such as Hitachi-LG Data Storage (Huizhou) Ltd, LG electronics (Huizhou), LG electronics (Hangzhou), FORYOU Group Ltd, Samsung, TCL, SONY and other well-known enterprises. Huizhou Techwin Precise Technology Co., Ltd is specializing in R&D, production and sales of Smart Electrical Engineering Products & Intelligent Network Electronics Products.
APC TOOLING

Lithuania

It does not matter, if your project is a concept or a current project already in production, APC Tooling can offer full service and support to help you to achieve your goals. Our highly skilled plastic part and tooling designers and engineers will lead you through the entire process - from design and prototyping, to mass part production.Through the years we have gained solid experience in relevant business operations within the plastic Injection industry and we are open to share our knowledge and experiences with our customers, to make their projects more successful.
PRINTPLASTA

Lithuania

We offer contract services in injection moulding and assembly. Our machines range from 30 ton to 500 ton. We offer help designing parts for moulding, making moulds, producing parts, assembly and packaging.
PLAX SRL

Italy

Plax is a leading plastics manufacturing company. We specialise in the production of plastic items. The company trades through 8 different brands (Lampia, Lampia Rom, Wanox, Protolampia, Rodan, Plaxtiglass, Due – Erre and Askerz), each specialist in a particular plastics manufacturing technology: injection, thermoforming, rapid prototyping, ultra-sound welding (electro-welding).
HANSUN PRECISION MOULDING CO., LTD

China

14-year Experience, ISO9001: 2008 and D&B Certificated, Business Partner of World Top 500, Engaged in: 1) Rapid Prototyping: SLA, SLS, CNC, Silicon Tooling2) Mold Making: EDM, CNC3) Plastic InjectionExhibitor as EVERY Frankfurt EuroMold
KONSTRUKTIONSBÜRO HEIN GMBH

Germany

The company KONSTRUKTIONSBÜRO HEIN GMBH, is a Service Provider, which operates in the Injection moulding of rubber and plastic industry. It is based in Neustadt, Germany.
ABAZIA SPA

Italy

The company ABAZIA SPA, is a Service Provider, which operates in the Plastic material processing industry. It also operates in the Injection moulding of rubber and plastic, Steels and metals - machining, moulds, construction of moulds for plastic materials, Injection moulding of rubber and plastic, and Steels and metals - machining industries. It is based in Felizzano, Italy.

GOTEC-PLASTICS GMBH

Germany

The company GOTEC-PLASTICS GMBH, is a Manufacturer/ Producer, which operates in the Injection moulding of rubber and plastic industry. It is based in Neustadt Am Rübenberge, Germany.
STEMO TEC GMBH

Germany

The company STEMO TEC GMBH, is a Service Provider, which operates in the Prototypes, industrial industry. It also operates in the Injection moulding of rubber and plastic, 3D prototypes and prints, quick prototyping, Injection moulding of rubber and plastic, and industrial prototyping industries. It is based in Castrop-Rauxel, Germany.
BARON SOLUTIONS

Germany

The company BARON SOLUTIONS, is a Multi-Category, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Injection, plastics - machinery, Injection, plastics - machinery, and Surface treatment industries. It is based in Aschaffenburg, Germany.
PLASTIQUE INDUSTRIES

France

The company PLASTIQUE INDUSTRIES, is a Service Provider, which operates in the Rubber and plastic - processing industry. It also operates in the Injection moulding of rubber and plastic, and Injection moulding of rubber and plastic industries. It is based in Brignais, France.
MOLDTOOL - TOOLS & MORE

Portugal

The company MOLDTOOL - TOOLS & MORE, is a Service Provider, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Moulds, precision, brioche moulds, moulding of plastic materials, and Moulds, precision industries. It is based in Marinha Grande, Portugal.
POLY-PRAT,S.A.

Spain

The company POLY-PRAT,S.A., is a Manufacturer/ Producer, which operates in the Injection moulding of rubber and plastic industry. It also operates in the Quality - certification, Plastic injection, mould building, and Quality - certification industries. It is based in El Prat De Llobregat (barcelona), Spain.
IKT LENZ GMBH & CO. KG

Germany

The company IKT LENZ GMBH & CO. KG, is a Service Provider, which operates in the Injection moulding of rubber and plastic industry. It is based in Bergneustadt, Germany.
RICHTER KUNSTSTOFFVERARBEITUNG

Germany

The company RICHTER KUNSTSTOFFVERARBEITUNG, is a Manufacturer/ Producer, which operates in the Hand tools, non-power industry. It also operates in the Plastics - industrial machinery and equipment, Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, Plastics - industrial machinery and equipment, Rubber and plastic - processing, Injection moulding of rubber and plastic, and Plastics - industrial raw materials industries. It is based in Creglingen, Germany.
GK CONCEPT GMBH

Germany

The company GK CONCEPT GMBH, is a Manufacturer/ Producer, which operates in the Moulds and patterns industry. It also operates in the Hand tools, non-power, Portable power tools, Rubber and plastic - processing, Injection moulding of rubber and plastic, Hand tools, non-power, Portable power tools, Rubber and plastic - processing, and Injection moulding of rubber and plastic industries. It is based in Dresden, Germany.
BERGMANN KUNSTSTOFFTEILE

Germany

The company BERGMANN KUNSTSTOFFTEILE, is a Manufacturer/ Producer, which operates in the Tubes and pipes, rubber and plastic industry. It also operates in the Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, Plastics - construction industry, Rubber and plastic - processing, Injection moulding of rubber and plastic, Plastics - industrial raw materials, and Plastics - construction industry industries. It is based in Gehlberg, Germany.