Results for

Industrial anti-corrosion products - Russia

Product recommendations

Korroquick 400 ml aerosol

United Kingdom

Profi-Oil 250 ml aerosol

United Kingdom

See more products

URALGRIT

Russia

UralGRIT LLC manufactures mechanical abrasives – copper slag, nickel slag, powder for water jet cutting, and restoration powder under own trademark Uralgrit. Uralgrit’s materials are used for corrosion protection of any surfaces and performance of blast cleaning. All-purpose slags of Uralgrit are professional abrasives: -as opposed to silica sand, use of granulated slag is safe for sand blaster operators; -have wide range of particles consisting of 11 particles; -have minimum level of dust (weight content of particles with a weight less than 0.2 mm does not exceed 5 %); -have constant chemical composition. Below are the advantages of collaboration: -Possibility of copper slag and nickel slag manufacture with any particle size within 0.1–3.0 mm. -The manufacture is certified in accordance with standards ISO 11126-3, ISO 11126-5. -High performance and efficiency of abrasives for Uralgrit metal are confirmed by more than 30-years experience of use in the field of ship building, ship repair, bridge building, steel structure handling, oil and gas industry. -The company’s specialists will give advises related to anti-corrosion and select particles to ensure the required profiling. 3 production sites of Uralgrit are located in Russia. Uralgrit is the member of the Federation of European Producers of Abrasives (FEPA).

All the products for "industrial anti-corrosion products"

Copper Slag 0,5-3,0 mm

Copper Slag 0,2-1,6 mm

See all products
INVENTIVE PRODUCTION CENTER (IPC), LLC

Russia

Inventive Production Center LLC (IPC) is a manufacturer of stainless steel and ferrous pipes, industrial fittings for construction of gas and oil pipelines. The main activities of IPC are: —development and introduction of technologies and equipment for production of pipes and tubing made of steel with inner and outer anti-corrosion coating; —construction of pipelines (field flowlines, industrial pipelines, high-pressure water pipelines) with permanent forged fittings for pipes; —production of non-ferrous pipe fittings and valves; —production of polyethylene-lined steel pipes and internally coated fittings; —production and supply of high-pressure electrical insulating inserts for protection against stray currents and electrochemical corrosion. The company has been operating since 1989, when its first patent was obtained and the first pipeline for an oil and gas facility was built. IPC, founded by the honoured inventor of the Russian Federation, has developed and utilises a fundamentally new technology for weld-free connection of pipes for pressures up to 25MPa. Over 2, 500 km of pipelines have been constructed using IPC's technology and equipment. The company offers: —metal pipes and pipelines, ready for installation; —adapting the product to the customer's project; —application of anti-corrosion coating; —installation of voltage swing monitoring equipment; —consulting and technical support; —inspection for compliance with local standards.

All the products for "industrial anti-corrosion products"

INSULATING JOINTS

See all products
ZAVOD KRONAKRIL LLC

Russia

Zavod Kronakril is the major Russian producer of inorganic zinc phosphate — a corrosion protection pigment for industrial paints in the form of a white powder that exhibits low toxicity, increases adhesion and improves the protective properties of paints and varnishes. The company also produces non-food pigments and dyes for manufacturing paints and varnishes. The company has been working in the Russian and international markets since 2003. Since 2018, 80% of Russian producers of corrosion-resistant paintwork materials opt for products by Zavod Kronakril®. The pigment is also used in the production of primers or single layer anti-corrosion coatings for metals based on epoxy, acrylic and alkyd binders and in water-based systems. The range of corrosion inhibitors produced by the plant includes: •KRONPHOS® PZ is the zinc phosphate dihydrate with zinc content of 45.0-52.0% •KRONPHOS® PZC is a pigment with an optimal combination of zinc, phosphorus and calcium. •KRONPHOS® PZA is the basic hydrate of zinc orthophosphate and aluminium with a higher phosphate content than that of zinc phosphate. •KRONPHOS® PZM is the basic hydrate of zinc orthophosphate and molybdenum. It exhibits increased resistance to corrosion currents, both anionic and cationic properties. •KRONPHOS® CP is a calcium phosphate. It enhances anti-corrosive properties and adhesion strength. Since 2019, the products of Zavod Kronakril® are certified pursuant to the REACH standard for free circulation in the EU.

All the products for "industrial anti-corrosion products"

Anti-corrosion pigment zinc phosphate

Anti-corrosion pigment zinc phosphate

See all products

Find quotes for

Filters

Results for

Industrial anti-corrosion products - Russia

Number of results

3 Companies