Results for

Moulds for back-injection moulding - Import export

92 Companies

25 Products

ELMET ELASTOMERE PRODUKTIONS- UND DIENSTLEISTUNGS-GMBH

Austria

Latest technologies in the processing and dosing of liquid silicones and LSR elastomer production. ELMET registered technological developments as patents back when it was founded in 1996. The name ELMET quickly became associated with high-quality and innovative tools. If the systems and components available on the market are not suitable for an optimum LIM process, ELMET will find the perfect solution through its own in-house developments. The TOP 3000 S dosing system, which is now in its second generation, should be highlighted here. Although the system was developed back in 2003, it has remained the benchmark for the injection moulding of liquid silicones thanks to numerous further developments and the integration of innovative functions since its launch. This makes ELMET a specialist in and partner for the latest technologies in the processing and dosing of liquid silicones and LSR elastomer production in Austria.

Website
STIELER KUNSTSTOFF SERVICE GMBH

Germany

Since 1998, Stieler Kunststoff Service GmbH in Goslar has developed innovative solutions for special technologies in the field of plastics engineering & sells equipment technology produced in-house worldwide. The technologies include processes such as internal gas pressure, external as pressure, water and projectile injection, physical foaming with our own patented process and much more besides. Our CoolFlow technology (rinsing with nitrogen at -30°C) is one of our key technologies for reducing warping tendencies and, above all, cycle times. There are also tempering techniques which can remedy special problems in plastic injection moulding, e.g. change tempering with steam or induction to avoid weld lines or poor surface quality. CO2 tempering can be very effective in tempering cycle-dictating points in the mould, where water is unable to do this. The plant technology service is provided worldwide by trained service staff. With the managing directors' experience with these special technologies stretching back over 30 years together with in-house developments, the company is in a very special position. From article and tool construction through system and equipment design, installation and commissioning to the optimisation of components, every service area is covered. Do not hesitate to contact us if you encounter any problems in the field of plastic products with regard to: sink marks, delays, cycle times, dimensional tolerance.

Website
SAXONIA-FRANKE GMBH & CO. KG

Germany

As a quality-conscious family business, SAXONIA-FRANKE supports its customers in all areas relating to stamping and forming technology, plastic injection-moulding technology and assembly installation. The company was founded in 1981 by Jörg Franke in Göppingen. The opportunity to move into a new, larger production building arose as early as 1987. Over the following years, extensions were built repeatedly, in order to cope with the constantly increasing order development in the company. In 2016, a new logistics centre was inaugurated. This measure allowed the production area to be expanded. Back in 2011, a generational change was introduced, and Felix Franke entered the management. Our success is based on innovation and drive, as well as a continuous commitment to quality and delivery reliability. This is ensured through qualified employees, through the use of the latest technology for machinery and through a uniform and sustainable concept for the implementation of tasks put forward by the customer. It's important to us here that the quality and economy of our work and products are closely linked with responsibility for the environment and society. Our integrated management system includes quality, environmental, work and health management. We are certified in line with ISO TS 16949, ISO 9001, ISO 14001, EMAS III and OSHAS, and are practitioners of the German Sustainability Code.

Website
BIEGLO GMBH

Germany

BIEGLO is a distribution company for high-performance plastics based in Hamburg, Germany. We are the exclusive distributor of polyether ether ketone (PEEK) CoPEEK from Panjin Zhongrun and sell polyimide (PI) Meldin® from Saint Gobain and (TPI) AURUM® from Mitsui Chemicals. Our range also includes polybenzimidazole (PBI), polyamide-imide (PAI) and polyetherimide (PEI). We also recycle. We buy back clean, sorted PEEK scrap. International operations are important to BIEGLO. We have many foreign customers, and can now draw on an international network of suppliers to deliver our popular products. BIEGLO also operates a number of online shops: PEEK-shop.de, PI-shop.de, PAI-shop.de, PBI-shop.de and PEI-shop.de. Our CoPEEK comes from Panjin Zhongrun in China. We offer it as either granulate or powder in different viscosities. Our range also includes semi-finished products in PEEK, including plates, tubes, rods, filaments and films. Meldin® PI is supplied by Saint Gobain and manufactured in the USA. We supply Meldin® semi-finished products in the form of plates and rods, as well as direct formed parts. AURUM® thermoplastic polyimide from Mitsui Chemicals in Japan is the thermoplastic with the highest glass transition temperature (Tg) of 245 °C. We offer PBI and PBI PEEK compounds made from Celazole®. Products in the Celazole® T Series are PBI compounds developed for injection moulding and extrusion.

Website See all products
MATCO

Belgium

Trading & distribution of chemicals for the foods, detergents, adhesives, paints, textile & plastic industry. Product details available in catalogue comprising triacetin, citric acid, phosphonates, GLDA, TAED, STPP... Distribution of post-consumer PVB for the injection, extrusion & molding industry in PP, PE, PVC for plastic, household, textile and automotive applications. Recycling off-spec (e.g. TiO2), 2nd grade & damaged chemicals or raw materials. Production waste/side-streams (liquids & solids) are treated for re-usable applications. We aim to prevent waste and maximize the re-use of raw materials. Compounding, production and blending of custom-made chemicals for carpet and artificial grass backing. EVA based compounds with low VOC content. Management of hazardous and non-hazardous waste, industrial cleaning. *Matco is an ADR approved company with warehousing services & administration support. Sales & trading activities in Europe, CEE, Middle-East, India and China.

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

DLR ELASTOMER ENGINEERING

United Kingdom

In 2021, DLR Elastomer Engineering Ltd was formed following the successful acquisition and relocation of Elastomer Engineering Ltd into Dexine Leyland Rubber Technology Ltd (DLRT) at our Leyland Facility. DLRT was formed by the merger of Leyland Rubber Components and Dexine Rubber Technologies, both of which have 100+ years of history as rubber manufacturers. Today, DLR Elastomer is a highly experienced and reliable rubber sheeting, fabrications, moulding and casting company with materials science and manufacturing expertise from many different fields, combining them to produce bespoke elastomeric products. Our range of presses provides flexibility, enabling us to choose the most appropriate method of curing from injection, transfer, compression moulding and rotocuring. Through years of research and development, our processes have streamlined to result in successful and economical rubber manufacturing services for which we are well known and are proud to call ourselves experts in the design, development and manufacture of specialised polymer products. Dexine had a long history, dating back to 1895, which included being a key supplier to the War Office. Leyland Rubber Components was a consolidation of several North-West-based rubber manufacturing businesses such as The Leyland & Birmingham Rubber Co Ltd. Established in 1966, thermosetting elastomer manufacturer Elastomer Engineering was a UK-based rubber moulding company specialising in rubber-to-substrate bonding.

See all products
SEILEREI KÖSTERS GMBH

Germany

SEILEREI KÖSTERS GMBH – YOUR SPECIALIST FOR PASTURE/ELECTRIC FENCES AND ROPES MADE OF DIVERSE MATERIALS. Seilerei Kösters GmbH originated from Ludger Kösters oHG, and looks back on centuries of experience in the production of rope products. We have focused on the production of electric pasture fences and expanded our expertise in this segment. Seilerei Kösters is one of the leading manufacturers in Europe. In 1999, the company was acquired by Susanne Else. The company headquarters was relocated to Emmerich, where a new and larger production facility was erected. Our product range: Electric pasture fences, wires, ropes and tapes, ropes made of PE, PP, cotton, hemp, Sisal and Spleitex, packaging string/twine, injection-moulded products (e.g. insulators, coils). Our product range covers all basic, standard and premium requests. We take individual customer specifications into account, and are happy to manufacture according to customer requests. We give advice about developing your own product lines – benefit from our decades of expertise and experience. Our company headquarters is in North Rhine-Westphalia, close to the border with the Netherlands, and has ideal transport connections – by rail, road and water. We ship our products punctually throughout Europe and all over the world. Our objective is to produce the highest quality at appropriate prices, guarantee fast and constant supply capability and increase the satisfaction of our customers.

See all products
DECAPAC

Belgium

DECAPAC offers a comprehensive solution to your packaging problems, providing you with an extensive choice of high-quality synthetic packaging materials suitable for use with a very wide range of products. With its 15 years' experience of injection molding techniques backed by high quality decorations subject to a continuous improvement programme (IML and offset printing), Decapac is one of a select group of suppliers of top-end luxury packaging. In addition to packaging, Decapac also offers an extensive range of heat-seal films and pre-cut lids made from a variety of materials dependent on temperature range requirements. DECATRAY injected and thermoformed, heat-weldable plastic packaging for gas packing/MAP, DECATP encapsulated packaging with tamper-proof closures. Boxes, seals, trays, small pots, small containers with covers and/or membrane seals, IML printing (labels), offset printing. Made to measure designs, mould design and aesthetics. Heat-seal film, also pre-cut.

See all products
FRIEDENSTAB KUNSTSTOFFTECHNIK GMBH

Germany

Do you have an idea? We have just the solution for you. Together with you, we work out the right overall package, and support you from development to series production of plastic components! Our core skills: Plastic products made using injection moulding and extrusion processes and all related services with committed and reliable customer service "Made in Germany". Since 1949 we have been a family business, and are now in our fourth generation. Thanks to fair treatment of our customers and suppliers, we can be proud of a number of partnerships stretching back several years, and will put the utmost effort into maintaining these in the future. We stand for commitment and quality that's "Made in Germany". Sustainability is an especially important subject for us. For this reason, 100% of the electricity we use is from renewable energy sources. Our energy requirements are met by certified hydropower and our own photovoltaic systems (180kWp)

See all products
AJKM LTD

United Kingdom

AJKM's origins date back to 1983 as a tool-making operation. Back then, our forte was the manufacture and supply of Injection mould tools for the Ministry of Defense and the Automotive Industry. Successive market share expansion through the late 1980s, 1990s and early 2000s, resulted in the set up of a production manufacturing facility and becoming a forefront manufacturer in plastic mouldings and metal pressings for the Automotive and Electronic Industries. AJKM has undergone huge market diversification due to its breadth of technical knowledge and by increasing the capabilities of our production facilities. Tool making expertise, material planning and selection, Injection moulding, metal pressing and product assembly are all part of the company’s current arsenal. At AJKM we take pride in working with our customers to develop a mutually beneficial partnership, allowing us to assist at every stage of the product's design and development, right through to production manufacture where required. This means all questions are answered, manufacturing excellence is achieved and our customers receive their requirements on time, first time, every time. Since inception we have held numerous voluntary accreditation's for quality and environmental management systems. Our current edition's of these are IATF 16949: 2016, ISO 9001: 2015 and ISO 14001: 2015.

HLH RAPID LTD

United Kingdom

We are one of the worlds leading manufacturers of prototypes and low volume part manufacturers. We have a range of services available; CNC machining, CNC milling and CNC turning Rapid or low volume injection molding Die casting vacuum casting 3D printing - SLA, SLS, SLM and FDM We work with companies all around the world to manufacture parts and prototypes. We work with startups and Fortune 500 companies and offer a fast, high-quality service that is reliable and trusted by 100s of companies. Our 12000sqm factory in Southern China is backed up by locations in the USA and in UK offering project management and QC on all parts delivered. We strive to improve our quality and service consistently to deliver what our clients need first time every time. If you are looking for one-off prototypes, for low volume production or for full manufacture and assembly then we are on hand to take care of you. HLH Prototypes offer a massive range of manufacturing services all under ne roof and also have a number of suppliers for specialised processes or finishes. We can deliver one-off components and prototypes and low volume production parts in rapid lead time.
IMAR S.C. PROMOTIONAL PATCHES, KEYRINGS, ELASTOMERS, VELCRO STRIPS. MANUFACTURER

Poland

The Imar company is located in Złotoryja in the Lower Silesia Province. We specialise in manufacturing patches, labels and different sewing accessories. The beginning of our business activities goes back to 1993. We perform patches at the client’s order. They may be promotional patches or decorative sewing accessories, for example for clothes, caps and backpacks. We are sure that we will fulfil your expectations. In addition, we manufacture elastomers by mould injection. Our tasks include the production of velcro fasteners, lock pendants, promotional key pendants as well as plastic labels. The scope of our activities also comprises manufacturing of emblems by means of screen printing and micro-injection. Moreover, we offer engraving stamps in non-ferrous metals or moulds for pressing. Our offer is extended by such products as: • decorations for footwear and shoelaces • soft buttons • eyelets for headphones • pins • badges • cup pads • press studs with logo • zip pullers • tags • zip badges We guarantee timely implementations of orders and competitive prices. If you have any questions, please feel free to contact us. We invite you to get the details about our offer and establish cooperation with the Imar company in Złotoryja.

THE MOULD COMPANY

Portugal

The Mould Company , it's a Portuguese mould maker focused in high quality standards at affordable prices . Our molds are made using the best steels from Uddeholm and Bohler , the mould components to use in our moulds are always the original from the customer chosen brand We are very skilled in all type of mould 1K , 2K, electrical or hydraulic unscrewing , core back system , double injection , inclined ejection, moulds for injection vertical machines . We are also very skilled in thermosetting moulds and die cast moulds . We also make the product developing using a 3D software pro/engineer and 3D printing and tests before the mass production, so if you want to place on the market some product you don't need to take chances because before the mass production you will have several products made for testing . So if you want a trust-able partner for your projects that's us.
NINGBO SHUANER MEDICAL EQUIPMENT CO.,LTD.

China

1． Buffer sets： this Equipment based the body’s engineering design, solved the sharp noise and damage when falled down the rice desk of nursing bed , and the same time use the high quality damper, the back activity would be very safety , be the max peaceful 2． Hands shake equipment: this shank would use the avoid-load -180°collapsible speicial construction, that is first creation home3. head of bed /tail board: this head of bed , tail of bed using the Korean mould and imported ABS plastic injection one-time, coined te rapid collapsible equipments, for solved the emagince , make out and load communicely, and the same time outside getting avoid block angle, hard and durable, wash communciely4.board of bed : using korean mould and imported polyester PP orignal materials , though the scientific ways dealy the injection plastic, joined-outlook, get the high anti-attrack and high toughness and elastic. And reduced the yet ago plastic oxidation and reduce color proceeding, and the long-used-l
SHENZHEN JASON INDUSTRY DEVELOPMENT CO., LTD

China

We sell: Bicolor/two shot/two material injection moulds, tricolor/three shot/multi-component injection molding, 260T~530T two color mold testing service, 1000T three color mould testing service; plastic Injection molds, Auto parts molds, fore&back bumper mould, instrumental panel mould, auto interior&exterior decoration mould, auto lamp mould, medical components molds, electrical home appliance molds, digital molds, rapid prototype etc.Our advantages: 1. Professional from design, engineering to manufacture with advanced equipment and software; 2. High quality and competitive prices; 3. Reliable and responsible; 4. Fast delivery5. Rapid prototype
NINGBO U-PER CONSUMER GOODS CO., LTD

China

Company Name: Ningbo U-per Consumer Goods Co., Ltd (formerly Yuyao U-per Consumer Goods Co., Ltd)Factory Location: Ningbo Electric Appliances Industrial Park, Luzhou Light Industry Zone, Luzhou City, Sichuan Province, ChinaSales Office: Rm 1307, Tower 3, Shangdong Business Center, NO. 1926 Canghai Road, Ningbo City, Zhejiang Province, China.Year Established: 2004Factory Size: 12, 000 square metersNO. of Employees: 200, including 10 advanced electronic engineersMain Products: moist/dry heating pad, heating back wrap, heating boot, heating belt, heating mat, tyrewarmer, electric blanket, heating mattress, etc.Capacity Per Month: 200, 000 piecesMachinery & Equipment: injection molding machine, sewing machine, high- frequency machine, SMTmachine, wave soldering machine, hi-pot machine, etc.Licenses & Certification: ISO9000: 2008, CE, ROHS, REACH, ETL, UL, FDA & GSWe are always looking forward to working with your esteemed corporations.
ZIMMERMANN-TECHNIK(HK) LTD.

China

-Located in Shenzhen (next to Hong Kong)-Established in 1999, today 85 employees in China (45 of them engineers)-ZMT specializes in the design, construction and production of high grade injection moulds and punching moulds for Automotive-, Electronics-, Household- and other industry -2004 in addition a GmbH was established in Germany, to optimize ZMT on site services in Germany and Europe Advantages-European qualitiy standard-After-sales and onsite service worldwideLess expensive and faster -compared to competitors-Communication in English or German-On-time-delivery-Money-back-guarantee if our engineers failed-Continued documentation according to developing project-Trialshooting under production conditions-Handling of projects up to 30 moulds and more-We provide mold flow, analysis and construction as special service-We use standard software: Pro/E, UG or Solidworks: CAE, CAD, CAM-Measuring according to European standard-Rapid analysis and feasability studies
JINKE PLASTIC & MOULD CO., LTD

China

Hi Honey, I'm Ms Karen, here I'd like to introduces you ourselves as follows, We are a professional "chair products" injection moulds manufacturer in Zhejiang China. The "chair products" is means office chair accessories (like armrest, back, seat, base, headrest..), bar chairs, student chairs; Besides we have our own injection machines and can produces ourselves. For more information please contact me by this email: shunweimjc@yahoo.com.cn Our webside is http: //www.jkmold.cn Ok, thanks for your time to have a view I hope we will have a happy know someday, maybe just now！...lol Wish you have a nice day.
ELCOM INTERNATIONAL PVT. LTD.,

India

Elcom are pioneers in the field of professional grade Electro-mechanical / electronic components and market leaders in India in this line of business. Elcom International Pvt. Ltd. has been in this business for over three decades. Elcom International Pvt. Ltd. has its own design and development centre and manufacturing facilities. The facilities include state of the art, tool room, machine shop, press shop, injection moulding, electro plating departments. It is known as a preferred source for major Original Equipment manufacturers based in India and overseas. The Design, Development and Manufacturing facilities are located at Kolhapur (Maharashtra State) in India. The Marketing, Technical Support and other Services are headed by an experienced team based at Mumbai (Bombay) and Bangalore and backed up by team members based at strategic locations. A country wide network of Channel Partners enhances the reach to customers at diverse locations and facilitates availability of the products
BWF KUNSTSTOFFE GMBH & CO. KG

Germany

Founded in 1956 and employing a staff of more than 400 at our sites in Offingen, Geretsried and China, we process high-quality plastics to create profiles, plates, optical films, pipes, deep-drawn parts and injection moulding parts. BWF Profiles is the European and Asian market leader in the extrusion of plastic profiles, plastic pipes, plastic plates and optical films for use in fields such as lighting, illuminated advertising, POS/display and bus & train. The product portfolio is complemented by high-quality deep-drawn and injection moulding parts produced by our subsidiary, BWF Thermoforms. Thanks to innovative manufacturing facilities and continuous research & development, we guarantee our customers a decisive technological advantage. We accompany you through the entire development process, from the design stage through prototype production to the end product ready to be installed.

Website

ZIMMER GMBH KUNSTSTOFFTECHNIK

Germany

Development, prototypes, mould construction, series production, tool transfer. We take care of you at every stage of your project. The all-round, carefree package. In the age of digital transformation, we at THE KNOW-HOW FACTORY accompany our customers worldwide on the road to technological excellence. We see ourselves not only as a technological leader and one-stop manufacturer of hardware and software, but also as a competent research and development partner. The Zimmer Group stands for family business, passion, innovation, stability, know-how and vision to ensure our customers’ growth as a future full-range provider.

Website See all products
VWH GMBH

Germany

Tool and mould construction is an additional mainstay of our business. Our focus in this area is on plastic injection moulds for sophisticated technical parts. Our more than 30 years of experience in this area form the basis for innovative ideas, professional production and smooth implementation of projects. Insert and outsert injection moulding technology and sampling of injection moulds are part of our standard services, and our in-house injection moulding shop enables us to react spontaneously to your requirements. We can develop 0-series, prototypes and pre-series at very short notice. VWH offers a diverse pool of skills, ranging from development of initial ideas and designs to the production process through to packaging management. This enables us to ensure project support right from the very beginning. This is beneficial both for the customer and for the end product.

Website
WILHELM-PLASTIC GMBH & CO KG

Germany

We are your partner for design parts and technologically advanced solutions, which we accompany from the prototype up to series production. Working since 1958 in the processing of synthetic materials, we possess a magnitude of experience and extensive knowledge in the development, manufacture, assembly and series introduction of thermoplastic parts. Surface design and tool conception are some of our special areas. The realisation of the quality standard desired by the customer is the top priority for us. We are certified according to IATF 16949-2016 and have made it our aim to consistently further develop our quality assurance system at this level. The best quality, flexibility and delivery reliability underlie our good reputation. The customer satisfaction known by everyone is furthermore guaranteed through friendly and competent specialist advice and comprehensive order support

Website See all products
WETEC GMBH

Germany

Founded in 1999, we are specialists in die and mould manufacturing and produce prototypes, small series and large series of plastic products for a wide range of applications. We design and manufacture the tools required for use at our site (as a system supplier in series production) or for use at the customer's premises. Moreover, we are happy to produce customised tools. Thanks to our cross-industry production facilities, we are partners for customers from the automotive, electronics, tool manufacturing, mechanical engineering and plant engineering sectors, as well as for measuring technology companies and many others besides. We develop tailor-made solutions designed to be sustainable and future-proof – whether we are manufacturing individual components, supplying ready-made products or acting as a full service partner. Our profile: - Injection-moulding machines with a clamping force of 25–320 t - Manufacturing of injection-moulded parts of 1–1200 g in weight - Injection moulding of insert parts - Manufacturing with the gas injection method. We process all thermoplastic materials and elastomers. Our specialities: PA6T/6I GF 50 FWA with drinking water approval. Conductivity. Materials with anti-slip or flame-retardant properties. In order to manufacture tailor-made and high-quality plastic products, you need to have the right hardware. We have fully equipped die and mould manufacturing facilities where we produce high-quality injection moulding tools. We also use Cimatron E CAD/CAM software to assist us with designing and adapting items for the injection-moulding process

Website
ALLIANCE CAOUTCHOUC

France

Since 2003, ALLIANCE CAOUTCHOUC has manufactured all types of injection and compression moulded items in rubber, silicone, EPDM, nitrile, Viton, Chloroprene and other materials, all made in France. ALLIANCE CAOUTCHOUC operates REP, MAPLAN, ROCHART and DESMA presses in capacities ranging from 40t to 630t, so that we can produce parts weighing from a few grams to several kilos, and in all hardnesses. We also operate an large-format HURCO machine tool. As experts, we will design and fabricate the tooling and formulations of different materials you need, meeting your needs in terms of designing the best and most cost-effective mould for your application. Alliance Caoutchouc has sufficient purpose-built space to store your moulds and parts so that we can meet your demands very rapidly.Our policies include traceability of materials to ensure your receive consistent post-fabrication quality. Injection moulding rubber is a technique that allows task automation for high and medium production runs to ensure production of rubber parts at a controlled price. We also offer steel and metal machining. Please visit our website at http: //www.alliance-caoutchouc.com/fr/ or call us on +33 (0)5 46 99 68 86, a technical advisor will be happy to suggest the right solutions to met your specific requirements.

Website
GDI CORPORATION

Bulgaria

GDI offers customised manufacturing services in various industries, ranging from producing a specific part to opening a new facility with dedicated teams and machinery. Our goal is to deliver a high-quality product at an economical cost for long term partnership. All GDI business ventures are strictly confidential. GDI Corporation consists of subsidiaries that focus on specific industries. GDI is the largest ISBM bottle producer in Bulgaria. Injection Machines from 50t-450t. 100% Made in Europe. Service include: -Manufacturing within a Clean room, Class 8 -Manufacturing of plastic components, Injection Molding -Manufacturing of plastic bottles, Injection Stretch Blow Molding/Blow Molding -Printing on plastic components/bottles -Blister Packaging of components -Ultrasonic Welding of plastic components -Assembly of semi-finished or finished products. -Others upon request We work with a variety of hard polymers, soft elastomers, and silicone. GDI has several trucks that deliver partner products in Europe, a total of 28 vehicles. Certifications: ISO 9001, ISO 13485 (Medical), SMETA 2 Pillar & Lego SQP. Upon request can comply with additional standards. GDI provide, solutions for: -Production Tooling -Logistics Optimization -Product Properties & Design -3D Printed Prototyping in house & QC testing -Graphical Design -Product Packaging -Warehousing and direct shipment -Others upon request Contact us for a quotation!

All the products for "moulds for back-injection moulding"

Manufacturing of plastic components, Injection Molding

Website See all products
GEBR. W. + H. ZAUGG AG

Switzerland

In over 70 years, Gebr. W. + H. Zaugg AG has built up expertise that is unique. Only this way can perfect products be produced, which withstand the technically demanding market of today. Innovation and precision are essential in mould construction and injection moulding. We act and work accordingly every day to give our customers the best. The company Gebr. W. + H. Zaugg AG is a family business owned by Bettina Ulrich-Zaugg and Stephan Ulrich. We are your partner for perfect plastic parts, mould construction, production of individual parts, 3D printing and servicing.

Website
PAUL THOORS GMBH KUNSTSTOFFVERARBEITUNG

Germany

Manufacture of suction cups in all variants. Suction cups with threads, suction cups with hooks, suction cups with clamps, suction cups with cross holes, suction cups with studs, suction hooks, double suction cups and wall hooks. Paul Thoors GmbH is a market leader in its sector and has been producing high-quality suction cups and plastic items for a wide range sectors for over 65 years. The majority our total production volume is the manufacturing and distribution of our own products. We also manufacture according to drawings or samples as contracted work and as a supplier. We produce our wide range of products on the very latest production systems, e.g. with insertion robots and automated handling systems, thereby ensuring an efficient and reliable production flow.

Website
AYBERKSAN PLASTIK KALIP SANAYI

Turkey

AYBERKSAN Plastic Mold Industry started its service in 2004 in Ivedik Organized Industrial Zone with mold manufacturing. Considering that quality and customer satisfaction are equivalent, it has signed many successful projects in different sectors both at home and abroad in a short time. While demonstrating his sensitivity to quality with the certificates he has, his biggest investment has been the importance he gave to human resources and technological developments. It has expanded its vision by adding plastic injection, which is one of the integral parts of the industry, to its mold production, and has brought together thousands of products and services from the defense industry to the medical industry, from the automotive industry to furniture, from the park and garden group to the drilling industry. It has made it its mission to offer the most suitable solution to the demands of its customers in the field of plastic injection and injection molding. Accurate and efficient transfer of information is at the forefront of its commercial principles. It has always managed to remain dynamic with its technical capacity, sensitivity in R&D, and dedication to customer satisfaction. We'll be pleased to answer all you questions and observations, don't hesitate to contact us.

All the products for "moulds for back-injection moulding"

Automotive

Website See all products
NOVELTY STEEL

Turkey

Established in 2004, Novelty Steel is Turkey's leading steel structures and metal fabrication exporter with clients worldwide. At Novelty Steel, we offer solutions to various industries with broad applications. With more than 20 years of experience in steel fabrication, we provide our core solutions for steel constructions, structures, and metal applications. Our main work areas are construction, energy and power, mining, and machinery. Our fabrications : •Steel structures and constructions, •Metal fabrications, •Steel Silos and Tanks, •Steel Stairs & Canopies, Mezzanines, •Silencer & Ducts, •Steel Fabrications, •Steel Halls, •Steel Buildings, •Steel Bridge & Overpass, •Laser cutting, Novelty Steel exports its products to Europe, North America, and the Middle East. All our products have CE marking and are certified by EN 1090-2. We offer high-quality steel fabrications at the best prices in Europe. Please do not hesitate to contact us for more information!

All the products for "moulds for back-injection moulding"

Plastic Injection Moulds

Website See all products