Steels and metals - welding and brazing - Import export

TORUS-255 has the widest possible range of arc welding currents (from 20 to 255 A), which makes it possible to use it both for welding very thin metals, including in the TIG mode (welding with non-consumable electrode), and for continuous welding of large metal structures using an electrode up to 6 mm in diameter. The operating margin in the ТОРУС-255 device is such that it can be effectively used not only for the MMA and TIG modes, but also in the surfacing and cutting modes. At the same time, the weight of the device itself is traditionally not big – only 5.7 kg. Like all devices of the ТОРУС line, ТОРУС-255 has increased reliability with all its maximum parameters. A 3-year manufacturer’s warranty is a guarantee of its high performance in the most severe operating conditions.

The inverter machine VIKING 500A PRO is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of VIKING 500A PRO devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 500А (100% at 420 A). The welding inverter machine can be used at low temperatures and reduced supply voltage. Adjustable functions of hot start and arc reheat imply the ability to adjust the operation of the device with minimal spattering and allow you to perform work in any spatial position of the electrode and welded surfaces.

The VIKING-500 PRO semiautomatic welding machine has two-piece design, is designed for power supply from a three-phase 380V network and produces 500A at a load of 60%. The design feature consists in a separate feeding mechanism that can be removed from the source to a control cable length of up to 15 meters. The device heats up the product to a minimum, which allows you to work with thin metals. An important feature is the presence of a two-shaft motor for the wire inch (four rollers), which significantly improves the stability and smoothness of the welding material feeding. Special software functions significantly increase the performance factor of the device. ... Key features of VIKING MIG 500 PRO: - digital control of the device; - advanced software settings; - dot welding mode 2T and 4T; - setting of a smooth drop of the termination current; - adjustable inductance; - forced gas purging; - forced wire inch; - the presence of a 36 V socket (for connecting a CO2 gas heating regulator

The Russian-manufactured inverter machine ТОРУС-320 is used for manual arc welding of metal blanks. The inverter has a functional control panel with a digital display that displays the main operating parameters. The metal housing is equipped with large ventilation holes in order to prevent overheating of internal components. The device is equipped with overload protection and voltage surge protection. The technologies applied during the manufacture of ТОРУС-320 devices allow performing any tasks in welding, surfacing and cutting metal structures for performing work with any kind of electrodes with a diameter of up to 6 mm and a maximum arc welding current of up to 320A (100% at 300A). The welding inverter machine can be used at low temperatures and reduced supply voltage.

Welding inverters of the PRO series are light in weight and dimensions. The metal housing reliably protects the internal components, making it suitable for use on the construction site. Inverters are capable to operate with all brands of stick electrodes from 1.6 to 5 mm and 6 mm (VIKING 250PRO, VIKING 270PRO), including the УОНИ 13/55 brand. The minimum arc welding current is 30 A, the maximum one corresponds to the model. TP at maximum current for all models is 60%. Mains voltage range is 160 ... 260 V.

Operating from a single-phase 220 V network, the industrial welding inverter ТОРУС-250 Extra has an increased arc welding current up to 250 Amperes and, therefore, an increased percentage of operating time (TP). This allows performing continuous welding works: the device provides TP = 100% at an arc welding current of up to 225 Amperes (electrodes with a diameter of 5 – 6 mm). The power consumption when welding with “household” electrodes with a diameter of 3 mm is such that the device can be connected to a regular household outlet. Thus, the ТОРУС-250 Extra device is universal for industrial facilities and for cottage areas.