Construction materials - Import export

Construction materials

Construction materials

Construction materials

Construction materials

Construction materials

Construction materials

Fire exit Door

Steel Door

Laminate flooring

Shower set

Closet Faucet

Construction

Construction equipment

It is a plasterboard used in the manufacture of white suspended ceilings, curtain walls and partition walls. It consists of a white core or core and a special paper. The interior is made of high-purity natural gypsum, which provides hardness, strength, lightness and workability to the board. The flexibility and high strength of the sheet provide the special paper on both sides. With its white application, lightness and flexibility, it provides speed and ease of application, labor and time savings. Please contact for different colors and features. Sizes and features vary.

BIMS

Steel Spiral Pipes

Water / Plaster Ratio :10 kg plaster per 5.5 - 6.5 lt water Usage Period :60 - 90 minutes Freezing Time: 120 -180 minutes Consumption Amount :8.5 - 9.0 kg/m2 (every 1cm thick) Compressive Strength :> 2.5 N/mm2 (4x4x16 blocks) Bending Fracture Strength : > 1.5 N/mm2 (4x4x16 blocks)

It is a mold plaster used in shaping ceramics and ceramics.

INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.

Acrylic copolymer emulsion based, surface filling feature, colored Pigmented, mineral-added, High Adherence Concrete Primer is a colored primer that allows concrete wall and ceiling surfaces to be plastered with gypsum plaster. Thanks to its quartz sand-added formula, it strengthens the adhesion strength of gypsum and gypsum-lime-based liquids to concrete surfaces, and prevents rapid water loss of the plaster and the formation of cracks due to it. For indoor use, not recommended for use on damp and wet surfaces. Do not store below 5 0C Scope of application Especially on concrete-based surfaces, vertical and horizontal (column, curtain, wall, ceiling and similar) is used as adherence primer before gypsum plaster

Repair and renovation application makes it practical. High addressability has.

Repair and renovation application makes it practical. High addressability has.

It provides high strength. It is easy to use. Time and material savings provides. It is economical CONSUMPTION AMOUNT Product kg / m2 Brick (8.5x19x19) 5,05 Brick (13.5x19x19) 9,39 Pumice Brick (10x39x19) 3,27 Pumice Brick (15x39x18) 4,81 Pumice Brick (20x39x19) 5,32 Pumice Brick (25x39x18) 7,55

Joint tape at plasterboard joints used with. It makes the application surface smooth. It does not crack in the joints. It has high adhesion. It is economical.

EPS, XPS, composite sheet, plasterboard and rock internal thermal insulation fast adhesion in applications provides the opportunity. It is economical.

Ideal for detail work. It is aesthetic. It is economical.

Makes the surface ready for paint, saves paint. Oz does not. It is aesthetic. It is economical

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.

GLASROC X SHEATHING BOARD 12.5MM Glasroc X Sheathing Board 12.5mm is a high performance gypsum sheathing board with mould resistant properties. WHERE TO USE Use it to provide external weather protection to Steel Frame System (SFS) constructions prior to the installation of the finished exterior façade system. COMPOSITION This product is made up of a gypsum board with a glass fibre mat reinforcement which has inherent mould resistant properties. The mat protects the board with its hydrophobic coating, and has additional UV resistant properties. PERFORMANCE Here we only provide performance information related to the product. Please see the White Book for system-dependent performance. EFFECT OF CONDENSATION The thermal insulation and ventilation requirements of national Building Regulations aim to reduce the risk of condensation and mould growth in new buildings. However, designers should take care to eliminate all possibility of problems caused by condensation,