Gas fittings - Import export

brass gas orifice hex incircle diameter 0.69 +/- 0.03 inch inner through hole diameter 0.328 +/- 0.010 inch length 0.531 +/- 0.010 inch external thread 5/8-28UN manufactured by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Installation into pipelines as inline detonation flame arrester e. g. for the protection of ignition gas lines or measuring devices. Applicable for all materials of the explosion groups IIA1 up to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Operating from both sides, for a maximum operating pressure of 1.2 bar abs. and a maximum operating temperature of 60 °C.

For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The installation of the detonation flame arrester into horizontal and vertical pipes is permissible. Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides. If only one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected.

Application as inline armature with venting and breather valve function for vessels, used preferably for installations in pipes. The exhaust air is carried away via a pipe. The ventilation is also effected via a pipe, which is preferably used to carry inert gas. Functions the same as KITO® VD/o3-… (type sheet F 18 N).

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

THE INNER LAYER IS COMPOSED OF HIGH QUALITY PVC THAT IS NOT AFFECTED BY LIQUIDIZED GAS OR METHAN GAZ STRENGTHENED WITH SYNTHETIC STRINGS TO INSURE MAXIMUM EFFECIENCY THE OUTER LAYER IS MADE OF A SPECIAL COMPOSITION OF PVC MATERIAL TO EFFECTIVELY RESIST HIGH TEMPERATURE AND ALL CONDITIONS

✔ Plumbing and Heating Supplies ; ✔ PP-R & PVC Pipes & Fittings ✔ Ball & Gate & Check Valves ✔ Collector & Manifold and More ✔ Contact us for any of your queries; ✔ Whatsapp : +905422557055 ✔ E-mail : info@feraplas.com