Components- electronic - Import export

The RC-SM1276-868 module is designed based on SX1276. The SX1276 incorporates the LoRaTM spread spectrum modem which is capable of achieving significantly longer range than existing systems based on FSK or OOK modulation. At maximum data rates of LoRaTM the sensitivity is 8dB better than FSK, but using a low cost bill of materials with a 20ppm XTAL LoRaTM can improve receiver sensitivity by more than 20dB compared to FSK. LoRaTM also provides significant advances in selectivity and blocking performance, further improving communication reliability. For maximum flexibility the user may decide on the spread spectrum modulation bandwidth (BW), spreading factor (SF) and error correction rate (CR). Another benefit of the spread modulation is that each spreading factor is orthogonal - thus multiple transmitted signals can occupy the same channel without interfering. T

RC-CC2640 is designed based on CC2640F128 Bluetooth Smart (BLE4.1) System-on-Chip, fully supports the single mode Bluetooth Low Energy operation. The module provides the ability to either put your entire application into the integrated ARM Cortex M3 microcontroller, or use the module in Network Processor mode in conjunction with the microcontroller of your choice.

he RC-CC3200 module is the second-generation series of modules in the SimpleLink family and consists of an applications microcontroller unit (MCU), Wi-Fi network processor, and a power-management subsystem. The module comes integrated with all required components including on-board flash, clocks, and RF filter for easy hardware integration and quick time-to-market.The applications MCU subsystem contains an industry-standard ARM Cortex-M4 core running at 80MHz. The RC-CC3200 module supports a wide variety of rich peripherals, including fast parallel camera of embedded RAM memory options, with peripheral drivers in ROM memory. The series also includes a secure device with on-chip 128-bit secret key supporting secure boot as well as applications and user data encryption.

The RC-CC1310-XXX module is based on Texas Instruments CC1310F128 component. The CC1310 device combines a flexible, very low power RF transceiver with a powerful 48 Mhz Cortex M3 microcontroller in a platform supporting multiple physical layers and RF standard. All the GPIO are routed out. Available : - 433Mhz version - 868MHz version - 915MHz version

It is a low cost sub 1GHz multichannels transceiver designed for low-consumption wireless applications. The hardware is based on Texas Instruments CC1101 component. Programmable from external microcontroller via SPI interface. SMT and THT version. XXX : Specified working frequency (433/868MHz.)

433.92MHz ASK Superhet Receiver Module. Low cost version

s an FSK Radio Receiver Module with PLL Synthesizer and crystal oscillator. Single Line Package with power down mode and RSSI Output.

is an FSK Radio Transmitter Module with Crystal oscillator. Dual in line package operating at 3.3V. Output Power = 10dBm Power down mode is also available.

IMS (Insulated metal substrate) technology allows the mounting of power components directly on a highly thermally conductive printed circuit board . The result is a compact and reliable solution which, thanks also to the reduced cost compared to systems with traditional heat sinks, is finding more and more application in sectors where effective dissipation of the heat generated by electronic components is required, such as of Lighting, Automotive and Power Supply . The devices can operate at lower temperatures with a guarantee of greater reliability and lifespan , avoiding the assembly phases of mechanical heat sinks. The assembly cycle is simplified and can in some cases be reduced to just the SMT assembly operation. The availability of dielectric layers of different nature and thickness offers many design possibilities from a thermal and electrical insulation point of view. It is possible to use different materials with both aluminum and

The automatic single-head cappers are designed to apply aluminum caps or screw-on and snap-on plastic caps to glass or PET bottles. All closure heads are made entirely of stainless steel, as well as most of the machine components. The speed variation is electronic, controlled by an inverter. Other capping systems are available to meet different needs: cork, crown, twist-off. It is also possible to combine 2 turrets on the same machine with different combinations, for example, screw cap + cork, cork + crown, screw cap + T-cork. The range of single-head cappers is designed for productions of up to approximately 2,500 bottles per hour and can be integrated with automatic cap feeding systems of both mechanical and pneumatic types.

Soft packaging paper for the protection and transport of fragile items and electronic components, shock resistant, absorbent and scratch resistant. Paper blankets for flexible wrapping and paper blankets for removal, the right protection for the transport of machinery, furniture and domestic items. Flexible paper packaging available in sheets, rolls and various weights for different uses, such us layers for pallets or disposable carpet pads for cars.

ZELLAMID® 1400 PET, Polyethyleneterephthalate is a semi-crystalline, thermoplastic polyester based on polyethylene terephthalate. The low moisture absorption and the low coefficient of thermal expansion result in high dimensional stability for components with tight tolerances. A low coefficient of friction and a very good abrasion resistance combined with los deformation under continuous load make this material particularly suitable for moving machine parts. Polyethylene Terephthalate is used to create highly stressed elements and supports, details that require high dimensional stability for precision mechanisms and insulating components for the electrical and electronic industry. Furthermore: *bushings and bearings, gears *food valves *insulators *cams *sliding guides *supports and connectors

NEW EUROVEICOLI E-COMMERCE