Tools - Import export

D & R Racking Ltd have a wealth of experience in bespoke racking requirements. If your requirements be Coil Racks, Tool Racks, Raw Material Racks or just any racks that are none standard and require a more bespoke design and installation then we can help. Pallet Racking/ Tool Racking/ Cantilever Racking can normally overcome the application by tailoring a racking system to your needs. Most systems are available in a full range of heights and widths with various load capacities give us a call to let us help decide which system best suits your requirements.

Tool Racking Storage Systems are fully adjustable and designed to create a versatile and safe system with good accessibility. The system is fully adjustable and can be supplied in various heights and lengths to suit our customers needs.

D & R Racking Ltd have a wealth of experience in bespoke racking requirements. If your requirements be Coil Racks, Tool Racks, Raw Material Racks or just any racks that are none standard and require a more bespoke design and installation then we can help.

Plastic Fixings & Fasteners (or simply put Nylon) are often employed for fixing panels into position, however they are also regularly used for assorted tasks such as grouping cables together for health and safety purposes. Being made mainly from Plastics and Nylon, these are high performance parts created for specific uses such as the ones mentioned above. All sizes and variations can be found by clicking through to our website, we also have a huge number of free samples available for people to try if they would like to test the sizing of a product beforehand.

Levelling Feet are a high end threaded product suited towards the levelling out of a surface. This kind of foot works by having a slightly movable base that can adjust to slightly uneven surfaces, increasing the stability and strength experienced when placed on such a floor. These are used over non-levelling options due to the rigidness that some fixed versions can provide, especially on flooring such as concrete which often has discrepancies in the smoothness of finish. We stock these base adjusting feet in many styles, often labelled as 'articulating' on site, these mean that the base can adjust to the flooring you place them on, increasing stability and weight ratings of such uses. Free samples and fixings available on site.

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location Cast iron gridded cube with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location Cast iron gridded cube with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Small nose diameter to provide excellent tool clearance. Case hardened, optimising the rigidity, strength and durability. The gripping pull-back action to actuate the collet chuck means the work piece will be moved slightly in the Z-Axis. This is normally acceptable for first operation work and the work piece position can easily be determined with a facing cut. The 5C and 16C collets have been designed with a long small nose diameter allowing for good clearance for tooling. All collet closers are case hardened and ground optimising the rigidity, strength and durability.

Allignment Busing and Thread Hole for Quick Accurate Set-ups Ground Flat and Parallel Threaded Holes for Side-Location X-Shape allows for more side Clearance for Machining Cast iron gridded cross profile Tooling Column with mounting holes. Grid pattern with allignment bushes and threaded inserts for ease of set-up. Ground flat parallel and perpendicular for accuracy. Holes for side location to allow precise loading and setting up of the tombstone.

Sturdy Cast Iron Design Ground Flat and Parallel Modular quick change subplate to suit the BP13 modular cube. This plate is gridded to accept standard fixturing parts./

The Kuhlmeyer ZBS Twin Belt Grinding Machine is built for the roughing and finishing on welded edges, corners and surfaces on flat and mid-size workpieces out of steel, stainless steel, and aluminium, i.e. doors, frames, cabinets, housings, hoods, furniture parts, frame parts in automotive and aircraft – manufacturing, round bins, cylinders, heaters etc.

Metallurgical equipment all endure heavy-duty service under very demanding environmental conditions. Equipment is subjected to moisture, dirt, saw dust, wood chips, sap and tar and slamming loads. The hydraulic cylinders used on that equipment must meet these challenges day after day. Gidrolast has over 15 decades of experience building hydraulic cylinders for this tough industry. In fact, you could say we cut our teeth in the forestry industry. For our customers, that experience is invaluable. Gidrolast designs cylinders that are able to endure the difficult conditions that metallurgical machinery encounters on a daily basis.

Tool to depressurise Petainer Kegs after use. Compatible with all fitting types.

If a Siemens PLC has to be connected with a PC via Ethernet, the normal way is to take a CP / Communication processor. IBHsoftec has a more flexible solution: IBH Link S7++. It is a cost efficient Ethernet-PROFIBUS-Gateway for programming, drive configuration, for communication between PC and Siemens PLCs, inter-PLC communication and FDT applications. It is possible to connect the IBH Link S7++ with a hub or switch or via a Crossover cable direct with your PC network card. The used protocol is standard TCP/IP, so you can control your system using VPN or a router. IBH Link S7++ features: - PROFIBUS nodes diagnostic via web browser - Configuration via web browser - Configuration via NetPro - Windows 8 64 Bit support - Windows 10 64 Bit support - STEP7 64 Bit support - Time synchronisation - PROFIBUS diagnostic - Slave diagnostic - Integration within the TIA portal - S7 routing via RFC1006 - Fetch/Write via RFC1006 - PLC - PLC communication

The IBH link S5++ is a cost-efficient alternative solution for conventional PLC-PC-connections via Ethernet. If a PLC has to be connected via Ethernet with a PC, usually a CP communication processor needs to be applied to the PLCs rack. Due to the increasing integration in automation technology, more than ever a connection from a PLC to a PC is required. In general, the communication processors (e.g. CPs from Siemens, or Ethernet components from other manufacturers) are used for the connection to the PLC. As an alternative solution, IBHsoftec has recently introduced the IBHLink S5++ for connecting a PLC with a PC. The IBHLink S5++ is a compact and robust Ethernet-converter within a 15-pin Sub-D-housing for a connection via a switch, a hub or even directly to a PC with a common network adaptor. The used protocol is the standard TCP/IP protocol. In this way, the user can benefit from all the advantages of Ethernet like remote maintenance via a standard router or VPN-connections.

We are resellers of the Techneat range of amenity products, petrol powered spray machines upto 150 litres tank and 4 meter spray boom. Also the Acuspray hand pushed spray machines and Aculine -line marking machines. Extensively used on sports pitches. Acurate dosing rates and high quality construction differentiate these machines from other models. Distributor enquiries outside of the Uk are welcome please contact us directly.

Hook & loop System Kits come with Abrasive, Sponge for applying sealers and wipe down, cloth for dust removal and drying, with accessories also sold separately.