Installation cranes - Import export

Thanks to our many years of experience in the controls sector, you can benefit from a comprehensive range of products that also includes the right solution for even the most demanding requirements. Control your cranes, machinery and installations with our wire-connected control pendants – and utilise the wide choice of configuration options. Or profit from the maximum flexibility, safety and reliability offered by our radio controls. All of our controls give you ergonomic design, convenient operation and many opportunities to tailor the solution to meet the needs of your application.

JDN Cranes The delivery programme comprises explosion-proof overhead travelling cranes suspension cranes as well as slewing cranes which can be adapted to your individual demands as complete special installations are our speciality. According to necessities JDN hoists in motor trolleys or monorail systems are integrated in the crane installation. A comfortable and user-friendly pneumatic speed control is also available as for example the standard two speed control for crane and trolley drive. An infinitely variable speed control of the trolley and the hoist is also possible. Different JDN Cranes in Detail overhead travelling crane with one or two main girders suspension crane also with minimised headroom - with special low headroom trolleys slewing crane crane with mechanically coupled synchronised hoists crane with parallel hoists carrying capacities up to 100 t with spans up to 36 m Higher carrying capacities and spans on request. JDN Crane Kits for explosion-proof air...

SYSTEM SOLUTIONS FOR PROCESS WATER In the area of process fluids, the Lipp system offers many advantages due to its high flexibility in terms of tank dimensions and choice of materials. This means that tank solutions can be individually tailored to the process and the media to be processed. The method of installation, largely without cranes or scaffolding, and even inside buildings if necessary, make Lipp tanks and system solutions an attractive option for engineers and end users alike. As in other areas, Lipp convinces above all by its high flexibility and easy integration into planned or ongoing investments. A timely and high quality design and professional project and document management are a matter of course for Lipp.

Crane Installations Energy capacity 450 Nm/cycle Stroke max. 62 mm For even more protection: The profile dampers from the TC range of the ACE TUBUS-Series can also be used as safety dampers. These maintenance-free, ready-to-install damping elements made of co-polyester elastomer have been specially developed for use in crane systems and fulfil the international industry standards OSHA and CMAA. In the special TC-S design, managed to achieve the spring rate required for crane systems with the unique dual concept. Whether TC-S or TC, this range of models represents a cost-effective solution with high energy absorption for energy management systems. The very small and light design of Ø 64 mm to Ø 176 mm progressively covers energy absorption within a range of 450 Nm to 17,810 Nm.

The latest design of ELKON innovation team, ELKON MIX MASTER-30 On-site Concrete Batching Plant, makes it possible to produce concrete wherever needed according to international standards in a very economical way even for small projects that require relatively small quantity of concrete. ELKON Mix Master-30 On-Site Concrete Batching Plant which can be ready for concrete production within 1 hour in wherever concrete is required, provides the following advantages - Quick installation without crane and quick relocation (only 1 hour) - No need for any concrete foundation - Installation on a very small space - Transportable by towing on roads - Cost effective shipping to overseas (can be fit into 1 unit 40’OT Container along with the bag cement feeding system) - No permission required for concrete production - Allowing concrete production on site, significantly reduces the concrete transportation cost - High quality and precise concrete production

Mustanoglu Pi Tower Crane 140 (10 tons) for Tunnel Formwork The maximum lifting capacity of the Crane Pi 140, which is frequently preferred in construction projects in many countries of the world, is 10 tons. The tower crane, which lifts 1450 kilograms of weight at the boom end, has a boom length of 60 meters and a free standing height of 50 meters. Pi Tower Cranes are easily installed and assembled; It provides its users with a comfortable and safe working experience with its powerful automation system, ergonomic stairs and platform design. Mustanoglu, in order to meet all kinds of needs; It offers tower cranes in different models with load lifting capacities ranging from 2 to 24 tons, boom tip lifting values ​​​​between 750 kilograms and 2 tons and heights of up to 80 meters.

The Aerolift pipe lifting solutions are applied for many different situations and places. During production, storage, transhipment, and internal transport. For this specific situation we designed a lifting solution to handle bare and coated pipes aboard the ship. The ship, The Amazon, was converted to an ultra-deepwater J-Lay vessel. Our vacuum lifting devices are installed on 4 cargo hold cranes. In tandem mode the cranes will be used to load and unload 24-meter-long pipes in a cargo. The lifting devices are designed to limit deflection of double joint pipes or to handle the entire pipe by vacuum only.

The machine tool department has a wide range of advanced machinery that enables the company to perform mechanical processes of milling, boring, drilling and lathing on products of medium and large size (single items or small lots). At the present time, the company is able to produce structures measuring up to 12000 x 1300 x 3000 mm height, guaranteeing excellent quality standards every step of the way. The mechanical processes done with CNC machine tools guarantee optimization of the work while reducing production time. The higher quality is observable in the finished piece and in the respect of the tolerances indicated by the client. The company department devoted to mechanical processing on commission is equipped with hoisting systems that facilitate handling. Recently, we installed a bridge crane with a capacity of 32+16 Tons that can be used to move large parts, optimizing the time employed to provide better service.

The GEDA 2 PK is a rack and pinion hoist with aluminium ladder segments. Its flexible system allows for the hoist to be installed to any kind of crane up to a standard height of 150 m (higher heights on request). This makes it a safe and quick transport system for crane conductors and maintenance personnel and materials. Its overspeed safety brake guarantees safe transport. Electrical safety devices prevent faulty operation. You can control the hoist from the control board in the car. (option: control to be changed to the outside or to the car). When the car is opened, a small ramp with lateral protection will open, too, forming a safe transition to the car together with the access enclosure. In order to put on the mast segments, the roof has to be opened. The lightweight ladder segments can be easily installed in a safe way. These are connected without bolts, with the help of a patented quick lock system.

TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating factor (K1) in Table 3 in the catalogue). Rigid...

TSCHAN® TKVSG (SEB-design) Construction and design acc. to operation sheet of German Steel Iron Industry SEB 666212 Hub and housing of reinforced material - Additional retainer rings improve axial fixing of the barrel by created axial rope forces General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the...

TSCHAN® TKV of reinforced-material Power improved design Proven design, hub and housing of reinforced material to transmit higher torque and higher radial load by same designed space General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating factor (K1) in Table 3 in the catalogue). Rigid...

TSCHAN® TKSG (SEB-design) Construction and design acc. to operation sheet of German Steel Iron Industry SEB 666212 Hub and housing of standard material - Additional retainer rings improve axial fixing of the barrel by created axial rope forces General features Torsionally rigid, compensate for angular and axial shaft misalignment Torque transmission by hardened steel rollers For use in crane/ hoist applications to support the rope drum Outer diameters up to 850 mm Wear indication Bores up to 400 mm Torques up to T Kmax = 685,000 Nm FEATURES AND APPLICATIONS TSCHAN TK barrel couplings are recommended for installation in crane lifting mechanisms, to connect the cable drum with the gearbox output shaft, as well as in winch conveyors and platform hoists. By selecting the coupling size (Table 1a/1b in the catalogue), it is necessery to consider the radial load (S T(N)), the dimension of the gearbox shaft (d min – d max) and especially the transmission torque (T) with the operating...

Tower cranes, of which Pi Makina is the first domestic manufacturer, are produced with 6 and 7-axis robot welding manufacturing technology. These easy-to-install and easy-to-assemble cranes are indispensable for construction sites by virtue of their load lifting capacities ranging from 2 to 24 tons, their boom tip lifting capabilities between 750 kilograms and 2 tons, and the working radius of up to 80 meters. With its powerful automation system, ergonomic stairs, and platform design, it provides its users with a comfortable and safe working experience. Pi Makina tower cranes, which have become an important brand of the sector in recent years with their 100% domesticity rate and superior features,.

Frame modular formwork MSK is light panel formwork, main element has the following dimensions 100 cm x 150 cm. Mounting element height is 7.5 cm. Bearing structure is a rack screen of strip iron with dimensions of separate cells of 25 x 25 cm. 11-layered plywood board 15 mm thick covered with laminated film is inserted into the structure of steel frames. • Foundation formwork • Wall formwork • Lift well formwork • Wall formwork (compound node points) • Column formwork • Bent surface formwork Modular formwork MSK has ideal gradation of all height ranges, from foundation to necessary wall heights. Base element width is 100 cm. Due to great width range of finishing (fitting) elements, for example 75, 60, 50, 45, 40, 35, 30 and 25 cm and presence of compensating element of 5 cm, formwork can be adapted to any monolith project. At construction sites where there is no crane formwork installation can be executed manually due to light weight of elements.