Machine protection equipment - Import export

Our high-quality steel barrier not only serves as scratch as well as ram protection, but also as effective collision protection for forklift trucks, pallet trucks and other vehicles in working environments. With its eye-catching yellow powder coating, it not only offers an attractive appearance, but also improves visibility to prevent accidents. The barrier is available in different overall lengths - 400 mm, 800 mm, 1000 mm, 1200 mm and 1500 mm - and flexibly adapts to your needs. Its robust construction and simple installation guarantee immediate protection for your walls. Thanks to the 45° mitre, it is even possible to build the barrier around corners to ensure comprehensive protection. Invest in the safety of your working environment and order our steel barrier as scuff protection today. Rely on quality, functionality and durability for effective protection against damage from vehicles.

he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the new G 1910-02 and G 1910-20 CO₂ handheld measuring devices users benefit from a compact CO₂ monitor with integrated sensor and an optical and acoustic alarm function that has an impressively long rechargeable battery life, easy charging and a very wide measuring range.

Fast production Fast cooling system 2 types of grease production in one circle The most homogenized product Flexible design capacity from 5 l to 3000 l of reactors Compatible with the production of all types of greases

All our barriers comply with the applicable health and safety regulations. In addition to protecting walls, barriers can separate and protect production lines, racks, and parking lots, and also designate zones for pedestrians, guarded, busy, or dangerous areas. Protective fenders have various uses, but their main task is to prevent damage. (The goods directly from the manufacturer – excluding brokers – best price and prompt delivery time.)

Fencing is commonly used to protect industrial gates, pedestrian fences, and shipping routes to protect pedestrians and transport routes, to protect sensitive areas, and to protect machinery and production lines. Bumpers are installed in warehouses, production plants, loading docks, etc. They provide basic protection against vehicle impact. The column barrier are made of high-quality steel. The products are powder coated in yellow and additionally marked with black stripes. The end of the post is permanently sealed with a welded steel plug. Bumpers both effectively protect storage shelves, machines, and equipment of the production line as well as structural elements of industrial halls.

WATTSAN 1530 ROTATORY has a rotary device for cutting cylindrical products. This machine is purchased for cutting steel tubes, galvanized and stainless steel, aluminum, brass and other materials. The machine is most often used in aviation, aerospace and mechanical engineering, as well as for the manufacture of auto parts, advertising products and household appliances. You can install a radiator of any power: 300/500/750/1000/1500/2000/3000/4000/5000 Watts. Important: the machine is equipped with a protective cabin with a power of 1000 Watts. Optional fiber laser emitter: Max / Raycus / IPG. Each of them is distinguished by high accuracy and speed of work, durability, but there are also differences. IPG is considered a premium model, it gives the best result and speed. The service life of the emitter ignition unit is about 100 000 hours. The protective glass for the lens, which must be changed at least once a month. The lens itself needs to be renewed approximately once a year.

TC series is characterized by high speed and superior precision machining. With the design of powerful drivers, moving column and rigid construction, the model is suitable for heavy cuttings with perfect surface roughness. The superior tooling system design features 300mm tool length availability, easy tool loading, servo driver for fast and accuracy tool selection, and extremely large loading capacity. Besides, the machine is equipped well protected guarding for safety. Standard accessories ISO 40 belt spindle(10000rpm) Chip auger CTS system with high pressure 20 bar pump CTS system with high pressure 70 bar pump Water gun Coolant through spindle with high pressure pump Heat exchanger Optional accessories Oil skimmer Safety module Air conditioner Coolant gun Optical scales for 3 axes Automatic door 4th axis preparation (wiring only)

From the project planning stage through to the end of their operating life we offer a range of concepts for economical and fault-free operation of your machines Target-oriented maintenance intervals to match the respective operating conditions Online and offline status monitoring Trend measurements relating to wear behaviour of the mechanical and electrical components Stocking spare parts for shorter downtimes Training for maintenance staff 24 hour service Company-oriented maintenance contracts Modernisation of the machine, controllers and protection equipment Environmentally compatible recyclingTesting of electrical machines and systems, type tests, system tests, heat run tests according to DIN standards Dynamic balancing or rotors Cleaning and oven drying of large machine parts such as stators or rotors VPI impregnation with rotating hardening process in drying oven VPI impregnation of transformers and large coils VPI or resin-rich coil production Manufacture of tooth-wound coils

For installation into pipes to the protection of vessels and components against deflagration of flammable liquids and gases. Approved for all substances of explosion group IIA1 (old: I) with a maximum experimental safe gap (MESG) ≥ 1.14 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The distance between a potential ignition source and the flame arrester must not exceed 50 times the inner pipe diameter. An installation into horizontal and vertical pipes is permissible. To detect a thermal load on the KITO® flame arrester element in operation a temperature sensor can be implemented as an option into the flame arrester body. Proof against “stabilized burning” and withstand this up to a max. burn time BT = 1.0 min.

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 620 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1460 x 1460 x 1083 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -with raised platform -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1460 x 863 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 2650 x 1300 x 435 -Retention capacity in l: 1100 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -100 mm ground leeway -galvanized grid (load capacity 650 kg/m²) -conical construction -can be stacked -for use with a pallet truck or forklift truck -shipping unit: 15 units on a europallet -for flammable liquids of the GHS-categories 1-3 -for water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

Vertical axis balancing machines are available in one plane configuration for the measurement of the static unbalance only, or in two plane configuration for the measurement of the dynamic unbalance. Vertical Balancing machines permanent calibration enables simple machine operation and provides high measuring accuracy. CIMAT ensure flexible concepts for protective equipment, improving machine safety and simplifying work. Vertical axis balancing machines are normally used for balancing Brake discs Flywheels Pulleys Clutches Woodworking tools Tools and tool holders Fans Pump impeller Grinding wheels Vertical Balancing Machine Available as a custom balancer Precise unbalance measurement for rotors Compact machine design Balancing in one or two plates Mass correction types milling, drilling, grinding, punching, welding, adding balancing weights etc. Special balancing adapters to fit ISO, HSK, CAT or other tool holders.

Applications : - Rinsing any type of part and ore - Degreasing mechanical parts - Washing wire clothes - Water curtains, etc.…

Coated track plates for use in crawler tracks for construction machinery. The extremely wear-resistant polyurethane Intec E provides the necessary mechanical properties for use in the crawler and protects the floor from the high machine weight. Up to 1.5 m length possible!

▪ Automated emptying system for containers up to approx. 30 liters ▪ Volumetric conveying progressive cavity pump based on the endless piston principle ▪ Pulsation-free and precise emptying and material supply to 1C and 2C dispensing systems ▪ In redundant dosing systems applicable ▪ For medium to high viscosity materials ▪ For structure sensitive, filled, abrasive materials ▪ Application for cylindrical or slightly conical metal and plastic containers ▪ Housing for machine safety and protection against dirt contamination ▪ Automatic retraction and venting the container as well as detection of media surface ▪ 4“-Touch panel with function keys for comfortable setting and parametrization of the system ▪ Externally controllable via Profinet interface ▪ Continuous determination of the position of the follower plate and level monitoring ▪ Adjustable pressure reduction for longer pauses

Our project, which will share the story of Seval Cable, which has announced its success in its field, was designed to add efficiency to a small space. We took care of all the stages of our project, where we used 50 tons of steel. It was used as a Machine Platform after assembly.

High temperature heater for pest control and drying processes Our high temperature electric heater model KILL MANN is an equipment designed and manufactured for pest control and drying processes where hot air at high temperature is required. The electric heater can be placed inside or outside the space that we want to disinsect or dry. The hot air will be directed towards the room repairing the heat evenly in all the corners where the insects can be found. Heat sensitive material should be removed from the room as the temperatures reached can damage them. The insects will die at a temperature of 48 °C for 150 minutes but if we increase the temperature to 55 °C for 60 minutes it will cause the elimination of the pest in all its stages (egg, larva, chrysalis, fully developed insect) by destroying the proteins from the body, a decisive factor in successfully eliminating the pest.

The Horizontal padder type FY-350 can be used for dyeing and finishing small material samples. The discontinuous FY-350 can be equipped with winding and unwinding rollers. The rollers can be easily put on DI05 Rotary waiting stationary and the whole continuus padbatch process can be made. Precise pressure adjustment helps to handle the nip pressure and unifromity easy.