Magnetic equipment - Import export

With its carefully calibrated auto-collimation, determining height differences has never been easier. The AT-B4A features fast and accurate automatic compensation, and has an extremely short minimum focus distance of 20 cm, ensuring reliable results in any weather conditions. Fine adjustments can be made through an endless drive, and horizontal angles can be directly read in either 1 gon or degree steps. Additionally, the device offers precise work through endless fine adjustment of the side, and has a protection class of IPX6.

The Magnet Lizard is unbeatable when it comes to the effective cleaning, decoating or paint stripping of large areas, e.g. ship hulls, tanks and larger steel structures. It adheres magnetically to any magnetic surface – horizontal, inclined, vertical or overhead. Remotely controlled and selfpropelled, the Lizard makes scaffolding unnecessary and so reduces the costs to a minimum. With working pressures of up to 3000 bar and a working width of up to 400 mm, the Lizard ensures precise working and high area efficiency. The Magnet Lizard is especially suitable as an accessory for WOMA devices in the Advanced and Expert series.

The twist seal Turbion is a seal made of polycarbonate. It has two pre-installed parts: a case and a rotor. The transparent (sometimes semi-transparent) case reliably protects the internal locking mechanism and helps to monitor its integrity. The internal rotor consists of 4 leaves that allow to rotate it only clockwise. This means that it is impossible to open or remove the seal without destroying the rotor, which warns the intruders of unavoidable and obvious signs of external interference. As an added security, the case catch and rotor are marked with the same unique number. This eliminates the possibility to replace the seal or some of its parts with another. Also, your logo, QR and bar codes, and other information can be laser marked on the case catch. All markings are lasered through the thickness of the surface making it impossible to erase them and apply another marking without visible damage.

Barrier is a tamper-evident sticker seal made of polyester. It has a unique number that is helpful in identifying the seal. The tamper-evident seal Barrier is available in two sizes: 60x20mm (2.36x079") and 100x20 mm (3.94x0.79"). Also, customers can choose whether the sticker will leave a mark on the surface after removal or not. Any attempt to remove the sticker will result in the "OPENED" inscription being displayed. Furthermore, this inscription cannot be concealed later on. This is the reason the seal cannot be reused. It can be applied on plastic, metal, glass, and painted surfaces. Here are some advantages of Barrier, s sticker seal manufactured by Clixar: Displaying the hidden "OPENED" inscription The special window for the signature Patented product from the manufacturer

The tightening seal Postseal is a monolithic polyethylene seal. Clixar developed a self-locking mechanism for the lock with an asymmetrical double-sided arrangement of elements. It simplifies the installation process of the seal and makes its opening more complicated. The unique number is applied to the seal's catch. The application is performed by laser marking through the thickness of the seal's surface making it impossible to erase the number without visibly damaging the seal's surface. In addition to the individual number, it is also possible to mark the seal with your company logo, QR, and bar codes. Advantages of the tamper-evident seal Postseal: The reinforced cast locking mechanism Special tenons to attach the seal to bags securely Self-locking mechanism of the lock Patented product from the manufacturer

PGS is a locking device for pipes made of polycarbonate or polypropylene. It is designed to seal cap nuts to prevent their twisting and disconnection of pipes, as well as the removal of gas meters and installation of bridge cables for bypass devices for the purpose of stealing gas. The pipe locking device consists of two semicircular-shaped parts with additional holes for the sealing rope. To install the pipe locking device, it is necessary to connect both parts on the mounting nut, put the sealing rope into the special holes on the sides of PGS, and install the seal (rotary or latch one). The seal should be placed as close as possible to the locking device. The tamper-evident seal and rope will prevent intruders from keeping the fact of removal of the seal and the locking device from the nut unnoticed. When an attempt is made to perform certain actions with the aim to steal gas or water, visible signs appear on the seal, which is evidence

PGK is a valve locking device made of polycarbonate and used to restrict access to the valves of taps supplying gas or water. The product consists of two parts that are installed on the tap. To attach the locking device, it is required to put the sealing rope through the special holes on the locking device. The process should be completed by installation of a rotary or latch seal which is securely fastened with a cable to the blocker and also prevents the chance to remove the locking device without any visible signs of damage to the seal. The is used to restrict access to the valves both in residential houses and at industrial sites. And the seal enables you to check whether there was an attempt to open the locking device with the intention to steal gas or water.

The Lumiseal twist seal is made of polycarbonate and consists of two pre-installed parts: the case and the rotor with catches featuring the unique number. It is applied by laser, which virtually eliminates the threat of counterfeiting or replacing the seal number. The rotor of the seal can only be rotated clockwise, so you can be sure that once the seal is installed, no one can open it without leaving visible signs of tampering. An additional degree of protection is marking applied by laser through the thickness of the seal surface. Thus, it cannot be erased, removed, or counterfeited. The unique number is applied on the case and the inner rotor, so no one can replace any part of the seal. Additionally, your company logo, QR, and bar codes can be marked on the case catch.

Garant is an anchor seal that is made of polycarbonate and consists of two pre-installed parts: a transparent body with holes for the wire, as well as the latch insert. The latter securely fixes the wire inside the seal. The insert has special ribs, which exclude the possibility of opening the seal backward. Transparency of the parts enables users to monitor the integrity of the locking mechanism and the rope. The seal insert has a convenient head that makes it possible to easily close the seal, as well as control attempts of unauthorized access or tampering. If these manipulations are attempted, the seal displays visible signs of impact, which is an indicator of attempted tampering. Additional protection against tampering and forgery is provided by laser marking - the seals are marked with unique custom numbering. The number is applied to both elements of the seal structure: the case and the insert. Laser marking is made through the thickness of the surface of the seal

Carat is an anchor seal made of polycarbonate. The design of the seal consists of two pre-installed parts: a transparent body with holes for the rope, as well as a anchor insert that fixes the rope inside the seal. Parts of the seal are made in several colors, yet they are transparent. This feature enables users to monitor the integrity of the locking mechanism and rope because they remain visible during operation. The seal insert is equipped with a convenient head that ensures easy closure of the seal, as well as control of possible attempts of unauthorized access or tampering. If such actions are attempted, the seal leaves visible signs of tampering, which is an indicator of attempted unauthorized access. Laser marking is additional protection against tampering or counterfeiting. It is applied through the thickness of the surface eliminating the possibility of replacing or counterfeiting the numbers and the seal as a whole. The application of customized numbering makes each seal

The tightening seal Capseal is made of polyethylene and designed specifically for gas cylinders. These seals have a one-piece tightening-type case structure, which consists of a round bowl, a locking mechanism, and a tail part. The bowl covers the side of the valve to prevent the possibility of connecting a tube to it and pumping out the gas. The internal locking mechanism operates based on a three-leaf collet and is protected from external mechanical impacts. The ribbed tail ensures reliable fixation of the seal on the cylinder preventing reversal movement of the tail. Additional protection provided for Clixar tamper-evident seals is a special laser marking applied through the thickness of the surface. It cannot be erased, replaced, or counterfeited without leaving obvious visible marks. Using the same method, the customized number is applied to the Capseal bowl, thus eliminating the possibility of replacing the seal and providing a convenient accounting option.

The tightening seal Bankseal is a monolithic polyethylene tightening seal that has a self-locking mechanism. It was developed specifically for the banking sector, but it has also been successfully used for sealing a huge number of other items and facilities. The Bankseal consists of a catch, an internal locking mechanism, and a ribbed tail. The locking mechanism features the two-leaf collet, which allows the tail part of the seal to be pulled in one direction only and has no reverse movement. Thus, the lock does not allow pulling the tail part backward. To prevent the possibility of the seal replacement, an individual number is applied to its catch. The number is marked through the thickness of the coating by laser, thus the number cannot be erased or counterfeited. In addition, the company logo, QR, and bar codes can be marked on the catch.

The Arrow V3 tamper-evident polypropylene tightening seal. The structure of the seal features a catch, a locking mechanism, and a tail part. The locking mechanism is equipped with a four-leaf metal collet of spring stainless steel. The operating length of the seal is 385 mm (15.16"). The locking mechanism features the leaves of the collet that are pointed in one direction, thus blocking the reversal movement of the seal tail, and preventing its opening unnoticed. If anyone tries to open the seal and pull out the tail - the lock cuts the tail off and the seal can not be restored. A transparent cap is placed on top of the collet, which protects it from external damage and makes it possible to check its integrity at any time. The cap also glows under the UV light, which makes it easier to detect the seal or check it in poor light or darkness by using a special UV flashlight.

The sealing wire consists of twisted or twined steel threads with or without a braid. The wire is used to fasten rotary seals and latch seals. The degree of reliability of the installed seal depends on the correct choice of the sealing rope. When choosing a sealing wire, it is recommended to pay attention to the following parameters: hole diameter in the seal type of steel (galvanized, copper-plated, stainless steel) coating of steel threads wire diameter number of cores tensile force The wires are used wherever rotary, lead, or latch seals are required. The installation of these seals is carried out on objects with eyelets or on large objects. We offer the following types of sealing wires:

Miniseal is a disposable tamper-evident seal for sealing reusable sealable bags, safe containers, storage cases (for keys, plastic cards, etc.), special bags, and even covers on door locks with Revealaseal devices. Most frequently this tamper-evident seal is used for the sealing of special bags - reusable sealable bags (RSB) that are intended for the storage and transportation of valuables, documents, keys, plastic cards, etc. The tamper-evident seal Miniseal is the most appropriate solution for courier services, private security companies, security services, logistics, and transportation companies as well as archives. The seal protects against unauthorized access. In particular, it ensures that the courier will not be able to open the RSB on the way and keep the fact unnoticed.

The Twisteiro tamper-evident twist seal is made of polycarbonate. It consists of two pre-installed parts: a transparent case with a catch and a rotor insert. It is used in combination with a sealing rope. The transparent case makes it possible to monitor the integrity of the inner rotor and also protects it from tampering. The inner part of the rotor can be closed by turning it clockwise only. It helps to secure the rope in the seal so that it cannot be reached without visible signs of tampering. For better protection, the same unique number is applied to the case and rotor. This measure prevents the substitution of individual parts of the seal. The numbers are laser-marked through the thickness of the surface, so they cannot be easily erased and replaced with a new number or tampered with. Clixar also provides the service of applying your company logo, QR and bar codes, and other information on the seal by laser.

The Arrow V3 tamper-evident polypropylene tightening seal. The structure of the seal features a catch, a locking mechanism, and a tail part. The locking mechanism is equipped with a collet of unique design made of stainless steel. The operating length of the seal is 385 mm (15.16"). Seal is produced with labels on the back side The locking mechanism features the leaves of the collet that are pointed in one direction, thus blocking the reversal movement of the seal tail, and preventing its opening unnoticed. If anyone tries to open the seal and pull out the tail - the lock cuts the tail off and the seal can not be restored. A transparent cap is placed on top of the collet, which protects it from external damage and makes it possible to check its integrity at any time. The cap also glows under the UV light, which makes it easier to detect the seal or check it in poor light or darkness by using a special UV flashlight.

Arrow V2 is a tamper-evident seal produced of polypropylene. It is a tightening seal by the structure that features a catch, as well as a tail part, there is a locking mechanism between them, it is protected by a special cap. The seal catch helps to conveniently fasten the seal and provides a space for identifying information, such as a unique number and other details. The operating length of the seal is 215 mm (8.47”). Clixar products are additionally protected by laser marking with a unique eight-digit identification number on the catch, as well as on the seal's cap. This type of marking is made through the thickness of the seal surface, which prevents the chance to erase the number without a trace, apply a new one, or replace it without any visible evidence. In addition, Clixar offers customers the opportunity to apply their company logo, QR and bar codes, and other relevant information.

Arrow Lux is a tightening seal made of polypropylene. It features a tightener with a catch and a tail part; there is a locking mechanism with a protective cap between them. The catch of the seal is designed for convenient fastening, as well as displaying identifying information: unique number, logo, and other details. The operating length of the seal is 385 mm (15.16") Another degree of protection of Clixar seals is laser marking with a unique eight-digit number on the catch and cap. It is applied through the thickness of the surface of the seal, thus, it is impossible to erase the marking completely and apply a new number or replace the seal. We also provide the opportunity to apply your company logo, QR and bar codes, and other information on the seal catch.

Black Prince is a tightening seal made of black polypropylene. It is classified as a tightening seal. The seal consists of a catch as well as a locking mechanism and a tail part. The locking mechanism contains a four-leaf spring steel collet, which provides reliable protection against tampering. The seal has an extended working length of 385 mm (15.16") for easy use on large and bulky objects. The lock provides reliable protection with a four-leaf collet made of spring stainless steel, where the leaves are slightly lifted upwards. When there is an attempt to pull the seal tail backward, out of the lock, the collet leaves drop down and cut the tail part off, thus rendering the product unusable. It means that you will always have visible evidence on the seal if there has been an attempt of external interference.

Magnet M2 is an antimagnetic security sticker seal made as a sticker with a transparent capsule. The sticker seal has a special adhesive composition that makes it possible to attach the seal to plastic, metal, glass, and painted surfaces. The capsule contains a special suspension, which irreversibly changes its pattern when exposed to a magnetic field. Changes in this pattern are evidence that intruders were making an attempt to influence the meter with a magnet to modify its readings. An additional level of protection of the tamper-evident seal Magnet M2 is provided by a special inscription "OPENED", which appears when someone attempts to remove the seal from the surface and does not disappear even if an effort is made to glue the seal back on. This makes it easy for inspection authorities to spot an attempted seal tampering.

Magnet is an antimagnetic security sticker seal made as a sticker with a transparent capsule. The sticker seal has a special adhesive composition that makes it possible to attach the seal to plastic, metal, glass, and painted surfaces. The capsule contains a special suspension, which irreversibly changes its pattern when exposed to a magnetic field. Changes in this pattern are evidence that intruders were making an attempt to influence the meter with a magnet to modify its readings. An additional level of protection of the tamper-evident seal Magnet is provided by a special inscription "OPENED", which appears when someone attempts to remove the seal from the surface and does not disappear even if an effort is made to glue the seal back on. This makes it easy for inspection authorities to spot an attempted seal tampering.

The Magnet UV tamper-evident seal is an antimagnetic sticker seal. It is designed to control the protection of metering devices. It consists of a sticker base with a protective layer, a transparent plastic capsule, and a magneto-sensitive suspension inside the capsule. The sticker base has a special inscription - "OPENED" - that appears when there is an attempt to remove the seal from the surface. The inscription does not disappear if the sticker is attached back on. The capsule features a UV glow effect, which makes it easy to check the integrity of the seal in poor lighting conditions. The magneto-sensitive suspension irreversibly changes its pattern when an attempt is made to influence the meter with a magnet with the intention to alter the readings. Clixar manufactures two types of Magnet UV seals that have different sensitivity thresholds - 50 mT and 100 mT. The transparent capsule makes it possible to protect

It is used to separate metallic particles from the grains

The RS Threaded sensor and the LUBESense1 Contact sensor also integrates with mounting pads and a magnetic mount for when drilling is not desirable.

The magnetic sheet floaters are designed for separation of magnetic steel sheets, clean , oily or sticky sheets. They help boost press and press brake production by eliminating the need to fumble with thin oily sheets. It also operates in automated systems. For a good selection of magnetic floater in the separation of plates, first of all we should know the thickness of the sheets, since it is a critical input to do a good job. One thing to bear in mind is that the magnetic float IDG.FS.RB shall be 90 mm higher than the stack of sheets to be separated. Construction features: * Stainless steel case. * Construction of the magnetic circuit with powerful permanent magnet, which can not be demagnetized. * High resistance welded box. * Threaded holes in the mounting base for a quick assembly * Ceramic or Rare Earths magnets. * Non-standard size. * Sizes and configurations according to customer characteristics. * Available in various magnetic forces.

The electromagnetic separators suspended on conveyor belts are the most effective equipment for removal of ferrous contamination from other nonferrous materials. Consist of an electromagnet which creates powerful magnetic fields that are generated by electrical coils which provide the required attractive force to separate the iron pieces. The self-cleaning of the equipment is performed by a resistant rubber belt and provided with transverse projections.This facilitates the transport of material and separation of the captured contamination throwing it to one side of the conveyor. The belt is mounted on a metal frame with pulleys that rotate with its bearings and is driven by an electric motor with a speed reducer; belt tensioning is done through a deflection drum. Its main mission is the protection of crushing and grinding equipment against damage and wear caused by the presence of iron pieces.The electromagnetic overbands separate ferrous particles from other materials in recycling pr.

AMT&C LLC offers a full range of services in calculations, design and manufacturing of permanent magnet assemblies with required magnetic field configuration. Many years experience in complicated magnetic systems production combined with application of modern most effective magnetic materials permit us to reach high parameters: - to produce, with permanent magnet systems, the magnetic flux density up to 3 Tesla and more; - to reach high homogeneity up to 105; - to create magnetic systems with complicated field pattern; - to produce adjustable magnetic field generators on the basis of permanent magnets. The magnetic field changing rate in such systems can reach 10 Tesla per second.

This type of magnetic systems is developed for NMR applications, but can also be used for other tasks requiring the highly homogeneous magnetic field in the significant working volume. The main magnetic system, built on the principle of dipole Halbach-structure, is complemented by the additional corrective system of magnetic elements, that allows to bring the homogeneity of the magnetic field to the level of 10-4 in the desired working volume.