Pneumatic pumps - Import export

In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor: This means your expensive machine tool cannot attain its full productive potential. The key challenge here is therefore: PROCESS RELIABILITY But there is another way. In fact, there are several proven solutions – centralised and decentralised – to this problem. ERDWICH machines and plant for swarf shredding and processing offer the highest levels of economic viability, safety and efficiency. With the decentralised solution, the ERDWICH swarf breaker is set up directly next to the lathe or machining centre. The swarf is removed and transported away to a central processing point either manually using a swarf cart or by means of pneumatic extraction, pumping or some other conveyor system. With the centralised solution, the swarf is collected in swarf carts at each machining centre and then transported to the ERDWICH master processing plant. This...

This high-pressure pump generates pressures of up to 700 bar with ease, with fine control for precise adjustment. It is perfect for testing manometers and pressure transmitters. The pump must be filled with 100 cm3 of hydraulic oil or water and can therefore fill up even relatively large dead volumes. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

This pneumatic hand pump can generate negative pressure/vacuum and pressures of up to 25 bar. Thanks to the integrated fine adjustment valve, any calibration pressure can be configured precisely and rapidly, making the pump ideally suited to testing measuring equipment. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

Pressol pneumatic grease pump set 20KG Pump is easy to disassemble for cleaning matters. Operate pneumatic grease pump with maintenance unit 20 218 950. Emptying 99% of the container, leaving 1% of residual grease in the container. Low noise level. Quick and simple handling with little assembly effort

Lincoln pneumatic grease pump Serie 20 model 82054 Suitable for 180-200kg barrels.

Pressol pneumatic grease pump model 18710051 Pump is easy to disassemble for cleaning matters Operate pneumatic grease pump with maintenance unit 20 218 950, only Emptying 99% of the container, leaving 1% of residual grease in the container Low noise level Quick and simple handling with little assembly effort

Lincoln pneumatic oil pump model 282396 Universal stub pomptube 1'' connection. Maximum output 22.0 liter/min Technical specifications Pressure ratio 3:1 Pump tube stub 1'' Maximum output at free range 22.0 liter/min Output per cycle 130cc Output at 75 cycle per minute 9.75 liter Maximum air pressure 13.8 bar Maximum outer pressure 41.4 Air connection 1/4NPT Outlet 1/2NPT

Pressol pneumatic Oil pump installation set for 200/220L drum model 19235600 To pump Engine, transmission, hydraulic oil. Ideal for direct connection to pipeline systems up to 70 m Can be easily combined with several hose reels Suitable for oil up to SAE 90 Installation set consisting of: Oil pump 3:1 model 19235 Compressed air hose 2 m DN10 with quick couplings Euro profile Oil drain hose 2 m DN13 with 1/2G bi.bu Ball valve 1/2 Filter Pressure Regulator with Oil Mister 20218950

Pressol pneumatic Oil pump model 19135 For transporting thin, self-lubricating media such as diesel, heating oil and motor oil Can be used as a tank pump due to the high throughput capacity Suitable for oil up to ISO VG 15 - SAE 5 Pressure ratio 1:1 Yield at 75 cycles per minute 20.6 liters Maximum flow at free range 66 L/min Length pump tube 860mm for 200/220L drum

Pneumatic diaphgragm pump with ratio 1:1. From 3/8" upt to 2", our standard pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump with ratios from 1:2 up to 1:80. The pumps are specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts.

Pneumatic piston pump developed by Jerko. The pump is specially designed for spraying equipment to ensure a long service life and easy maintenance. This enables us to offer an unrivalled low price for spare parts. The necessary pressure to supply the spray equipment is generated by a piston pump developed by Jerko with a transmission ratio of 1:3.

304 stainless steel tank SPA1000 model Capacity 958 liters Pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank Model SPABP1500 Pneumatic system Capacity 1500 L On welded feet Rounded bottom Atmospheric pressure Corked exterior finish Glossy annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 Clear drawing with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet (tank without level

304 stainless steel tank with pneumatic system On welded feet Domed bottom tank Atmospheric pressure Corked exterior finish Bright annealed interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clearing with stainless steel ball valve output 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 3 welded feet Cooling belt H. 500 mm Level indicator with stainless steel protection Circular door diameter 400 mm positioned flush with the bottom of the shell DIN 15 tasting tap Ladder support bar Clock thermometer

304 stainless steel tank SPA700 model Pneumatic system Capacity 696 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304L stainless steel tank Model SPABP700 With pneumatic system On welded feet Effective capacity 696 liters Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 drain with stainless steel ball valve outlet 40 MACON 1 clear run with stainless steel ball valve outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank Model SPABP600 With pneumatic system On feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPA600 model With pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

304 stainless steel tank with pneumatic system on welded feet Model SPABP500 Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank SPABP400A model With pneumatic system Capacity 405 liters Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 floating cap INOX 316L Complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 MACON

Model SPABP300 304 tank with pneumatic system On welded feet Curved bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 2 valves at outlet 40 MACON 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve)

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 stainless steel valve outlet 40 Macon

304 stainless steel tank with pneumatic system Flat bottom tank Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

SPA100A model Flat bottom tank With pneumatic system Atmospheric pressure Corked exterior finish Mirrorpolished interior finish 1 stainless steel 316L floating cap and complete pneumatic system (stainless steel cover, pump, air chamber, valve) 1 tap at the bottom of the ferrule with 1/2 "tap

PR9141 series hand-held pneumatic pump can be used in the laboratory or field environment, featuring simple operation, smooth buck-boost, fine adjustment, easy maintenance and leakage prevention. The built-in oil and air isolation device can effectively avoid the pollution of the pump body and prolong the service life of the equipment. It is mainly used to calibrate the pressure (differential pressure) transmitter, the pressure switch, the precision pressure gauge, ordinary pressure gauge and oil-free pressure gauge.

Details Product storage tank, internal paneling made of aisi 304 stainless steel Coating of internal paneling with teflon to facilitate the falling of product and subsequent internal cleaning High efficiency polypropylene pneumatic pump Pneumatic pump compressed air pressure control device Double aisi 304 stainless steel filter to safeguard efficiency of pneumatic pump Internal ramps complete with nozzles suitable for achieving an optimum impregnation of the part to be treated Internal fittings to load/unload product impregnating machine Product drip collection tray with replenishment in machine