Sawing machine tools - Import export

F.E.B.A. Laminating System is suitable for laminating, slitting and rewinding heat activated or cold bond adhesive products to fabrics, foam/rubber, soft foam, cork, felt and similar materials. Standard and special machines available to suit the customers specific converting application. UNWIND UNIT The unwind unit is composed of one station for the axial unwinding of the master logs. Manual web guide left and right. One 3" removable pneumatic shaft and brake. DRAWING UNITS The first drawing unit is composed of two large diameter siliconized rubber covered rolls; suitable for the unwinding of high and low thickness foam rolls. The second drawing unit is composed of two large diameter siliconized rubber covered rolls and will be equipped with a separate brake and clutch to be used when laminating very thin elastic materials or slitting narrow widths. UPPER UNWIND The upper unwind is to keep the single sided tape to be transferred. Manual web guide left & right.

F.E.B.A. model F400 single knife automatic log slitter suitable for slitting adhesive & non adhesive tapes, kaptons, dense foams, PPL, PE, textiles, non wovens, TNT and similar materials with an outside diameter of 400mm. Standard features like sonar & laser technology allow for a fully automatic slitting cycle drastically reducing log changeover time. Proportional penetration speeds coupled with an automatic blade 'AXIS' angle offer the highest quality cut available. The model F400 can be equipped with a variety of optionals designed to enhance productivty and limiting operator fatigue. TECHNICAL SPECIFICATIONS Material Width 1.200 3.100mm Maximum Log OD 400mm Slitting Width 2mm 3.100mm Indexing Tolerance ± 0.05mm Blade Speed Range 10 1200RPM Material Speed Range 10 1200 RPM ALL F.E.B.A. SLITTING AND REWINDING SYSTEMS ARE MANUFACTURED IN ACCORDANCE WITH EUROPEAN EEC SAFETY AND HEALTH STANDARDS.

The F.E.B.A. automatic logging system was designed to unwind/rewind adhesive backed materials, paper, styrene, foils, woven and non woven, rubber, foam and other like materials. This logger is designed to accommodate master logs up to 1000MM in outside diameter with widths up to 1700MM (Standard Size Special Applications Available). MACHINE'S MAIN FEATURES Maximum material width is 1700MM. (Special Sizes Available) Maximum OD of the master jumbo log is 1000MM. (Special Sizes Available) Maximum OD of the rewound logs is 420MM. (Special Sizes Available) Working speeds from 0 120 meters per minute. (Other upon request) Rotary turret with two pneumatic shafts. Core inside diameters available in 1.5" or 3". Pneumatic jumbo roll shaft for 1.5" or 3" cores. Contrast jumbo roll and winding shafts The unwinding tension is adjustable with a pneumatic brake and a servodiameter valve. Path rollers coated in ceramic. (Plasma Coating)

Metal Bandsaw Blades all products

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

Metal Bandsaw Blade

Metal bandsaw blade

Metal Bandsaw Blade

LG 164 is a compact, lightweight yet powerful reversible plate compactor developed for smaller jobs such as driveways and pathways, private house projects and narrow trenches. It is the ideal machine to use when macadam beds are thinner and you need nimble, responsive handling. The Hatz 1B20 diesel engine reduces fuel consumption and emissions, while quality components reduce vibrations.

Bi-Metal Bandsaw Blade

It efficiently grinds adhesives, paint, epoxy and spackle. With a grinding width of 280 mm it is suitable for small to medium concrete areas. 

Professional mobile band saw with robust construction, automatic band tensioning mechanism and precisely guided folding cutting table for cutting large-sized aerated concrete blocks. The saw can be easily set up and operated by one person and is characterized by extreme cutting precision. The maximum cutting height is 650 mm.

THE large Cedima block saw for diamond discs up to Ø 1000 mm and a cutting depth of max. 425 mm. The lockable saw head is infinitely adjustable in height

The CTS-57 G is a table saw for quick and clean cutting of bricks, clinker, natural stone and similar materials.

A maximum cutting depth of 125 mm in one cut or up to 250 mm when plunge cutting is offered by this table saw. Miter or bevel cuts up to 45° are easily possible and ensure optimal applicability. The robust single frame with integrated conduit channels provides high stability and a longer lifespan. It can be easily handled by one person due to the foldable legs.

It has an integrated water spray system that ensures optimal saw blade cooling and immediate disposal of sawdust. Due to the extremely efficient working system the water consumption is low and it complies with current safety standards. Also the saw is very robust because of its welded steel construction. The table pad with non-slip rubber coating is also manufactured with great care and combined with the precisely running, easy-to-use cutting table with adjustable angle stop precise cuts are guaranteed.

It relieves both human and the environment, and also preserves the valuable cutting tool. The ability to cut close to walls is outstanding. Thanks to its electric drive, joint cutting in indoor spaces is also among the special strengths of the COMPACTCUT 401 E, which is also characterized by maneuverability, durability and outstanding operator ergonomics. Whether cutting asphalt, concrete, making separation cuts, demolition work, tight construction sites or joint cutting in buildings - the powerful electric joint cutter with a 400-volt motor delivers excellent results under all conditions.

This powerful electrical drive is capable of handling up to 6.5 PS, making it the ideal choice for sawing concrete, stone, and masonry. The Coccodrillo 35 is safe to use in basements, rooms, and tight spaces, as it doesn't produce health-damaging exhaust fumes. It's easy to operate with a simple on-off switch and is electrically safe with PRCD protection. Additionally, the CARDI multi-function electronics provide soft start and overload protection, ensuring it complies with European and international regulations and standards.

LT 6005 is a well-balanced and powerful rammer, developed for efficient compaction of granular and cohesive soils such as clay and silt. Ideal for compaction in trenches or other narrow spaces, for example around pillars and pipes. Equipped with the latest Honda GXR120 engine, which is especially designed for rammers.

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

Standard equipmentwith tilting alu sliding table 1000x800 mm Cutting height 424 mm Cutting length 700 mm Roller diameter 500 mm Saw band length 3720 mm a) for three-phase current 400 V, 50 Hz, motor power 1,3 KW b) or alternating 230 V, 50 Hz, motor power 1,3 KW only saw band, to be selected according to the type of stone material with jack rings and 2 rollers Sound emission Lpa according to DIN 45635, part 1651 on gas concrete and lightweight refractory bricks ...75 dB(A) on Poroton ...................................... 88 dB(A) Size LxWxH: 1000x1000x1800 mm Weight: 130 kg

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

With automatic saw feed and quick-clamping device for the material (optional with clamping pressure regulation feature), the semi-automatic models offer more operating convenience as well as a fatigue-free working for the operator. A quick change of the saw blade is easily possible thanks to the large safety hood. The hydro-pneumatic saw feed can be adjusted infinitely.

Integrated into the machine base is the coolant system or, -as option- the microspraying system. The design of the base made of thick steel plate leads to reduced vibrations during cutting. A chip drawer makes the disposal of the chips so easy. Manually operated machines offer a smooth and easy sawblade feed via their lever, gearwheel and toothes rack. The semi-automatically operated machines offer a variable, hydro-pneumatically controlled setting of the sawblade feed. Each mitring position can be set with ease and accuracy within a range of 45°-90°-45-30°. The upper part of the sawing machine is swivelled into mitring position, lefthand up to 45°-righthand up to 30°. The jaw is moved easily from left to right. The material remains in its position. hardened and ground gear wheels and wormgears are the assurances for the longevity combined with highly reduced vibration adding to the sawblade lifetime.

Designed specifically for aluminium and NF metals, the VA-L fully automatic straight cutting saw series has totally redefined the standard when it comes to volume sawing of solid material, pipes and profiles with complex crosssections. Their consistently high yield makes them a valued mainstay for renowned aluminium processing firms and producers the world over. Key features of the series are the robust Extreme safety The unique machine concept prioritizes occupational safety and ergonomic design. The VA-L is 100% encapsulated as standard. The seal-tight casing practically excludes any risk of injury caused by reaching into the machine during sawing operation, as well as drastically reducing noise emissions. design, state-of-the-art drive technology used in the feed axis and main drive system, and the extreme rigidity of the ultra-precise saw spindle bearing.

The SLB bandsawing machines from BEHRINGER: A trustworthy partner for workshop and plants. Suitable for cutting tubes, profiles and solid materials made of metal and comparable plastics. Competitive pricing, precision made components, and impressive power. See for yourself. - Mitre cuts are possible from + 30° to – 45° - Scale for setting the exact angle — Clamping of the saw frame with a quickly-tension lever — Downfeed control by a hydraulic flow control valve - Automatic height-setting of the saw frame above the material — Frequency controlled sawblade drive (optional) — Exact cutting