• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • slabs - concrete

Results for

Slabs - concrete - Import export

Turkey

Verified by Europages

Support for concrete slabs made by recycled antischock (HIPS) material. Using area: door and window support of construction. 120*80*3 mm to 120*80*16 mm

Request for a quote

France

Verified by Europages

TECHNICAL PROPERTIES Primer filler for vertical surfaces or for use on ceilings made from poured concrete or pre-slabs. Decorating filler, for smoothing over. Smooth, matt finish. Odour-free. COMPOSITION AND APPEARANCE. Solvents : Water. Filler : Calcium carbonates. Additives : Dispersing agent, bactericidal fungicide. Thickeners : Cellulosic, polyacrylates. Binders : Acrylic dispersing agent. Density : 1.86. Dry matter : 75%. TECHNICAL PROPERTIES • Fire classification: A2-S1, d0 SUITABLE SURFACES Interior : ideal for covering bricks, brick tiles, cement breeze blocks, cinder blocks, de-bubbling pre-slabs, shuttered concrete, aerated concrete, for redecorating stippled walls or old damaged surfaces. APPLICATION. • The first coat should be levelled out using 60 cm scraper or skimmed with a rule. • After drying, the second coat should be smoothed with a scraper. • After allowing to set slightly, squeeze the filler at a slight angle using a clean scraper.

Request for a quote

France

Verified by Europages

TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.

Request for a quote

France

Verified by Europages

TECHNICAL DEFINITION SEMIN AIRLESS is an interior finishing coating designed for Airless projection. It is ideally suited to the preparation of pre-slabs, walled concrete and plasterboards before painting. COMPOSITION AND APPEARANCE Emulsion acrylic resin, mineral filler, cellulose derivatives, conservation agent and various additives. ACCEPTED SUBSTRATES • Pasterboard • Filling coatings • Old paintwork • Smoothed concrete • Plaster blocks SUITABLE SURFACES SEMIN AIRLESS can be covered with any acrylic or oil-based paint. TECHNICAL CHARACTERISTICS • Dry matter: 72% • Density: 1.6 PREPARATION OF SURFACES BEFORE APPLICATION The substrate must comply with DTU 59.1, i.e. be clean, dry, free of dust and of any trace of stripping oil. Plasterboard must be primed. APPLICATION SEMIN AIRLESS can be projected with any type of Airless type 695, 795 or Mark 5 machine, fitted with an Airless tremie and a size 21, 23 or 41 nozzle.

Request for a quote

Austria

Verified by Europages

Load capacity: 250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete. Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the...

Request for a quote

Austria

Verified by Europages

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C 35/45 concrete (EN 206) Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. Features: Sealed cover with 10 cm deep recess. Virtually invisible when installed. EPDM seal. Robust steel mesh reinforcement, crosswise welded. Opening tool included. The Lift-Off opening system: Every HAGODECK Type BVH-maxi steel cover comes with a set of lifting keys and clear installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: Inside buildings and their surroundings. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 10.2 cm Installation height ≈ 12.5...

Request for a quote

Austria

Verified by Europages

Load capacity: 125 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Hot-dip galvanised. High-load hinges. High-specification double-piston gas struts. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaranteed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. Applications: For installations which require access without particular effort. Especially for those installations where the cover is to be filled with concrete slabs, bricks, paving stones or paviors etc. Installation: Please study the enclosed installation instructions carefully before installation and pay attention to our...

Request for a quote

Germany

Verified by Europages

It’s a highly effectiv pasticizer which provides top strength with a low cement content, especially in earth-moist concrete. PAVELITH® KB 600 hast been especially developed for the production of all concrete block products made of earth-moist concrete, such as concrete paving stones, curbstones, paving slabs, non-standard concrete components, such as grass pavers, curbstones, garden slabs, angle stones, etc. - improved filling action - dense concrete structure - improved cement hydratio - high strength at low cement content - dense, visually appealing surfaces - good side sealing

Request for a quote

Turkey

Verified by Europages

The cost of construction is much lower than a traditional concrete construction. Assembly is quick. You can erect your prefabricated studiostyle home in a few hours. Maintenance costs are low. The civil engineering costs for the construction are low. It is installed on lightweight concrete (concrete slab or plinth). The prefabricated home structure has an average lifespan of 60 years. The design is performed according to the architectural requirements requested. Our interior architects can assist you with the many options we can offer for your home (custom kitchen, various bathroom options, etc.) Fully insulated house that meets your thermal and sound insulation requirements. Prefabricated construction complying with antiseismic standards. Tailored construction complying with anticyclonic standards, particularly those applicable in the Caribbean countries. Technical assistance with the help of a supervisor or an assembly team to see to the installation of your project.

Request for a quote

Poland

Verified by Europages

Bitumer Flexigum PU is a two-component bitumen-polyurethane compound that forms a permanently flexible and chemically resistant fastening and stress transfer compound. Bitumer Flexigum PU finds its use in: •for continuous resilient fixing of the rail as a subfloor, •rail fastening compound and as a lagging for the underfloor, •for making permanent and flexible expansion joints between concrete slabs and elements made of steel, •filling the gaps located between the road strip and the rail, •for filling concrete-to-concrete joints •filling joints, gaps, cracks and expansion joints in heavily worked asphalt and concrete pavements ( e.g., curbs on bridges), •filling joints "working" on steel and concrete bridges and other pavements characterized by strong movements.

Request for a quote

Germany

Reliable lateral protection according to safety standard EN 13374 - For a variety of applications (wall formwork, slab formwork, window and door openings, concrete slabs and exposed slab edges and upper wall edges) - Quick, easy assembly - According to safety standard EN 13374 - Use with a protection fence or wooden planks is possible A key element is the railing post lateral protection, which can be used for a range of applications when combined with various connecting parts. Thanks to the flexible application of the lateral protection system, you will save on investment and storage costs.

Request for a quote

Germany

This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm). EN 795:2012, E For flat roof pitches ≤ 5° Weighed down using 8 concrete slabs (ca. 224 kg) Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m² Also designed for usage as an intermediate post in a lifeline system Incl. 5 EPDM patches to protect your roof membrane

Request for a quote

Germany

Whether this device is left standing out in the open or integrated into your roof greenery, our ABS Weight OnTop Max anchorage device for flat roof surfaces has been approved for installation without penetrating your roof surface - simply by weighting it down (50 x 50 x 5 cm, concrete slabs not included). Please observe the installation instructions provided in the "abZ" (national technical approval: Z-14.9-824) For flat roof pitches ≤ 5° Weighted down using 40 concrete slabs (ca. 1.120 kg) | resulting roof load approx. 61 kg per m² If implemented as an end or corner post in a lifeline system, a special supporting tube needs to be used

Request for a quote

Germany

Thanks to its base plate (150 x 150 mm) and welded-on supporting tube (Ø 42 mm), this stainless steel anchorage point offers plenty of stability when used in a lifeline system installed in a concrete hollow core slab ceiling. Simply install the anchor on the substructure using the 4 slab expansion anchors supplied. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2017 Base plate + welded-on supporting tube Designed for concrete hollow core slab ceilings ≥ C45/55 (B55) Web depth min. 25mm Installed using 4 expansion dowels Can be installed in cavities and solid material

Request for a quote

Germany

This stainless steel anchorage point (Ø 16 mm) and matching base plate (220 x 220 mm) - certified by the German Institute for Construction Technology (DIBt) - can be easily installed on a suspended flat roof ceiling made of concrete. The 4 hollow slab expension dowels that come with the device ensure a reliable hold. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2017 For concrete hollow core slab ceilings ≥ C45/55 Web thickness: min. 25mm Installed using 4x V4A expansion dowels (included) Upgrade with a supporting tube for usage as an end or corner post in a lifeline system

Request for a quote

Germany

This anchorage device was specially-designed for flat roofs. It can be used as an anchor or system support and can be weighed down using concrete slabs (50 x 50 x 5 cm, not included) or gravel (not included). Its high-quality, stainless steel frame (150 x 150 cm) with aluminium crossbars is equipped with a central anchorage point (Ø 16 mm) - also made of stainless steel. EN 795:2012, E + CEN/TS 16415:2013 For flat roof pitches ≤ 5° Weighed down using 16 concrete slabs (ca. 448 kg) Weight incl. ballast: 483 kg | resulting roof load: approx. 214.7 kg per m² Anchorage point for 2 individuals Weighed down using gravel (ca. 450 kg) Weight incl. ballast: ca. 485 kg | resulting roof load: approx. 200 kg per m² Anchorage point for 1 individual (secures 2 individuals when used as an intermediate bracket in a lifeline system) Additional supporting tube required for usage as an end or corner post Incl. 5 EPDM patches to protect your roof membrane

Request for a quote

Germany

For all sunshade models For permanent installation, each sunshade can also be delivered with an encasable base (2-part). The size of the foundation depends on the sunshade model. The advantage: it saves space and you can remove the upper part by undoing only four screws. Then everything is open and there are no tripping hazards. The models ParaQueen, PyraMax and ParaKing also require a hinged joint.This is an enormous help in putting up and taking down the sunshade in a controlled manner. A level position is still guaranteed when removing the hinged joint. Panel Base For all sunshade models The sunshades can be put up anywhere with this mobile bevelled base. Concrete slabs in the recesses of the base ensure sturdy support. The base is bevelled to avoid hazardous edges for staff and customers. The panel base has the following dimensions: 970 x 970 x 50 mm. With our special King-base you are on the safe side. Our specially treated heavy base is made of 3 mm heat-treated galvanized ste

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Netherlands

Moisture meter Name: TotalCheck 3-in-1 wood moisture meter - Flooring Material: Floorings, Floors, Wooden floors, Wood*, walls, drywall, concrete, building materials, concrete slab *Corrects for 69 individual wood species and the temperature Mc: 5%-60% wood scale (71 species) 0.1%–6% drywall scale 0-100 pin mode and 0-300 scan mode (Reference scales for non-wood building materials) Calibrations: Wood species, Drywall Overview TotalCheck, three-in-one meter offers scan and pin moisture modes and a thermo-hygrometer that measures ambient Temperature and RH and calculates Dew point and GPP. High levels of ambient humidity can be warning sign at inspection jobs, and RH is also a major concern when installing a floor over a concrete sub-floor. To address this concern, the TotalCheck with S-3 was designed to conform to the ASTM F2170 standard to determine RH in a concrete slab, using in-situ probes. With TotalCheck, you can feel confident that your concrete floors have dried adequatel

Request for a quote

Netherlands

Moisture meter Name: QuickNav building materials moisture meter - Restoration Material: Floorings, floors, wooden floors, wood, walls, drywall, concrete, concrete slab, insulation, plaster, building materials Mc: 6-60% MC wood scale 0.1-6% drywall scale Scan range of 0-300 numerical reference scale Calibrations: Wood, Drywall Overview QuickNav offers the same high performance pin mode, scan mode, and thermo-hygrometer as our industry leading NavigatorPro, in an easier to use format. The QuickNav will instantly calculate dewpoint, grains per pound (GPP) and vapor pressure for fast, accurate moisture measurement. If you are looking for the versatility of a 3-in-1 meter and do not need to store and download reading, QuickNav is the answer! QuickNav, Delmhorst’s easy to use 3-in-1 meter, offers pin mode, scan mode, and thermo-hygrometer in a single handheld unit. Scope of Supply: QuickNav moisture meter with R/H sensor Rugged carrying case 2-E short pin probe Optional: 26-ES hamm

Request for a quote

Netherlands

Moisture meter Name: NavigatorPro building materials moisture meter - Restoration Material: Floorings, Floors, Wooden floors, Wood, walls, drywall, concrete, concrete slab, insulation, plaster, building materials Mc: 5-60% MC wood scale 0.1-6% drywall scale 0-100 pin mode and 0-300 scan mode (Reference scales for non-wood building materials) Calibrations: Wood, Drywall Overview Meeting the restoration contractor's demand for detailed, accurate, and accessible information. The Navigator Pro moisture meter features advanced job definition that organizes readings of the floor, wall, and ceiling in affected rooms. Stored readings can be downloaded to a spreadsheet on your PC, providing clear, complete documentation of every job. With features you can't find anywhere else, plus Delmhorst's renowned quality and service, the Navigator Pro will guide you from wet to dry! Navigator Pro can be used to check moisture in drywall, insulation, wood, concrete, and plaster. It traces leaks to

Request for a quote

Germany

Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology.

Request for a quote

Germany

To view and download the brochure please click on the left image. Tradition and Progress Egglayer / block making machine system has a long tradition. The first automatic KNAUER egglayers / block making machines for the production of high-quality concrete products were developed in the 50s and 60s. The working principle remains the same. Referred to the investment / productivity ratio, the manufacturing of concrete elements like hollow blocks, landscape units, bricks, retaining wall units, etc. onto a concrete slab is to this day the most cost-effective and efficient method. KNAUER has continued to extend its egglayer / block making machines line and developed new concepts that are state-of-the-art. The KNAUER-system egglayers / block making machines are working today fully automatically, are controlled by PLC and are provides with the latest technology. Around the world many of KNAUER egglayers / block making machines are in daily operation.

Request for a quote

Netherlands

Moisture meter Name: HT-3000 thermo hygrometer - Flooring Material: Flooring, concrete slab Mc: Temperature: -20°C - 70°C (-4°F - 158°F) Dew Point: -40°C - 70°C (-40°F - 158°F ) GPP Range: .1 GPK – 285 GPK (1 GPP – 2000 GPP) Calibrations: Temperature Dew Point GPP Range Overview The HT-3000 thermo-hygrometer is a great tool for monitoring the level of humidity in flooring installations. With a simple interface, fast acclimation, and useful statistics like dewpoint and grains per pound, the HT-3000 is a great value at an economical price. Use the HT-3000 in conjunction with one of our moisture meters for a thorough assessment of every job. Your Benefits: Bright, clear digital display Fast response time Relative Humidity Range: 0%-100% Temperature Range: -20°C - 70°C (-4°F - 158°F) Dew Point Range: -40°C - 70°C (-40°F - 158°F ) GPP Range: .1 GPK – 285 GPK (1 GPP – 2000 GPP) Automatic power down Reading HOLD feature Size: 20x8x4cm (8”x3”x1 5/8”) Weight: 285gr. (10 oz.) Rugged const

Request for a quote

Netherlands

Moisture meter Name: TotalCheck 3-in-1 building materials moisture meter - Inspection Material: Floorings, Floors, Wooden floors, Wood, walls, drywall, concrete, building materials, concrete slab Mc: 5-60% wood scale (71 species) 0.1–6% drywall scale 0-100 pin mode and 0-300 scan mode (Reference scales for non-wood building materials) Calibrations: Wood species and Drywall Overview Delmhorst’s TotalCheck 3-in-1 meter measures moisture by pin and scan modes, and features a removable thermo-hygrometer attachment that measures ambient temperature and RH, and calculates dew point and GPP. High levels of ambient humidity can be warning signs at inspection jobs. The TotalCheck will guide your inspection with accurate, informative readings every time Your Benefits: Bright, clear digital display Pin Mode: • 5%-60% wood scale • Corrects for 71 individual wood species and temperature (°F and °C) • 0.1% – 6% drywall scale • 0–100 numerical reference scale for non-wood building materials

Request for a quote

Germany

Concrete pavers and slabs as well as natural stone pavers are cleaned with it down to the joints and appear fresh and clean again. Joints soiled by moss and sediments are also easily cleaned with the special spray cans. A particular advantage here is the integrated splash guard, thanks to which there is no nuisance to passers-by or pollution of the adjacent environment. Protective clothing and subsequent cleaning operations, which are unavoidable with conventional cleaning equipment, are no longer necessary with the Easyclean EC-60. With the four large wheels of the Easyclean EC-60, pushing is also particularly easy.

Request for a quote

Cyprus

The Tramex Concrete Moisture Encounter 5 (CME5) is a non-destructive analog moisture meter for concrete floors and slabs providing instant and precise quantitative measurement of moisture content using Gravimetric testing as a baseline. The CME5 also provides Carbide Method equivalent readings for concrete and other cementitious substrates as well as comparative readings as per ASTM F2659.

Request for a quote

United Kingdom

Puddle Flanges ensure a watertight seal and radon barrier where pipes pass through concrete walls or slabs of any structure or building.

Request for a quote

Germany

Innovation and quality is our key to success. Since the company foundation HUBTEX has set standards with a number of developments and product improvements. The feedback of our worldwide customers is incorporated into the development and the design of new vehicles so that different market requirements can be met in the best possible manner. GTR concrete slab transporter 35 t load capacity

Request for a quote

Belgium

Pentra-Sil® (AC) Advanced Lithium Alkalinity Control Formula Primer is specifically designed for use on sweating or efflorescing floors as a pretreatment for Pentra-Sil. The unique treatment will neutralize substrate surfaces suffering from alkalinity problems. It reduces sweating of the concrete surface, neutralizes surfaces treated with sodium or potassium silicates and reduces vapor drive that carries the alkaline salts to the surface of the concrete. High pH levels at the surface of concrete can attract moisture as Mother Nature acts to equalize an existing pH imbalance by drawing moisture from the concrete slab towards the surface or from the air above the slab. Reduction of this phenomenon has been seen through the use of Pentra-Sil® (AC) and Pentra-Sil® (C&N). It is aggressively worked into the pre-cleaned surface where it is allowed to penetrate deep into the substrate to control surface alkalinity.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free