Components- electronic - Import export

HYT271 MK33 in a robust and compact screw-in stainless steel housing with a metric M14 thread. Ideal for test measurements in an industrial environment. Sustains -40°C to +120°C and 0 to 100%RH (water activity aw). Digital I2C interface over 0.5m cable. Compatible with HYT Test board (USB or 0 to 10V analog outputs). This functional prototype is intended for easy evaluation of oil sample compatibility. Please contact us for support during your tests and to discuss the design of an OEM sensor probe tailored to your application.

Digital (I2C) module for relative humidity and temperature designed for excellent reproducibility and response time required in meteorological balloons and drones. Extra fast measurement. Suitable for operation measurement down to -80 °C.

The Vison 2N Align is a horizontal/vertical two-axis incline laser with the TE 90 ALIGN receiver for automated alignment and automatic inclination adjustment in two axes. It features easy operation and fast targeting. In addition, the automatic inclination adjustment is up to +/- 15% and the range is at least 80 meters, up to 200 meters depending on conditions.

Electronic condensate drains EMD series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The units can be installed as external drain on any application specified. Condensate accumulates in the collecting reservoir. When the level is high enough condensate is being discharged from the system without any air losses. Fluid level is detected by precise capacitive level sensor. Special self-cleaning direct acting valve assures reliable operation. Electronic condensate drains - EMD series is also equipped with operation alarm, led indicator, test button and internal strainer. Version with Service Network for diagnostics parameter setting and alarm output is also available.

TD M timer controlled condensate drain is designed for reliable removal of condensate or other liquid from compressed air system. Discharge intervals can be set with two adjustment knobs. TD M drain is available in several types based on operating pressure and operating medium. TD M can be used in variety of applications. For applications not listed please contact us or your local dealer.

IED drain series is designed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. The series is designed to discharge condensed water from filter housing primarily. Condensate accumulates in the bottom of filter housing. Fluid level is detected by precise capacitive level sensor. When the level is high enough condensate is being discharged from the system without any air losses. IED drain series is also equipped with led indicator and test button.

We have over 10 Million Lines of Components in our Supply. Contact me on liamm@merefields.com

At Merefields Electronics we have built a network of suppliers and manufacturers to provide our customers with total electronics distribution. Our Electro Mechanical product range includes Electronic Components and we support key manufacturers such as Schrack, Apem, Binder, Omron and many more. Please send me an enquiry via liamm@merefields.com or enquires@merefields.com

BOSCH TERMINALS AVAILABLE ON OUR STOCK LIST Please send me an enquiry via liamm@merefields.com or enquires@merefields.com 

The UTC OPA2336 is a CMOS operational amplifier. It is operated on a 2.1V (Min.) single supply. A100kΩ load is driven by the rail-to-rail output and the accuracy of the output voltage is ensured at ± 3mV. The UTC OPA2336 is characterized by its low quiescent current (20μA/amplifier), low offset voltage (125μV max), low input bias current (1pA), and high open-loop gain (115dB).

• Containing pressing pliers and the most popular insulated end-sleeves • For establishing solderless, electrical connections according to DIN • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

EE Proto provides final assembly services for customers who prefer to receive completed PCB into final packaging.

Printed circuit board design services is one of the ways that we help our customers get to market faster as our engineering team has significant real world experience designing PCBs for performance and manufacturability.

EE Proto utilizes 3D Printing to enable companies, inventors, makers, engineers to launch new products to market in a much easier, faster and affordable way.

Every service we provide is driven by our motto “Launch your project as simple as 1 2 3”, EE Proto is providing one stop solutions for customers interested in prototyping->mid-scale production. One of the most important advantaged of EE Proto is that we produce each product with the same seriousity and quality even for 1 prototype.

This Personal Electronic Dosimeter device can be configured to use either two or four-dose alarm levels. It can also be charged with a direct micro USB connection, providing greater flexibility. Benefits of the PED-Blue include: Robust and easy to use Direct micro USB connection for greater flexibility Large, clear, easy-to-read display Light weight – suited to more applications IP67 rated Simple one-button operation

These half-wave and bridge rectifiers are ideal for installation in the junction boxes of medium-power brake motors, brakes and solenoids. Accessories include flying leads and a range of mounting hardware so that installation on DIN rails is also possible. Encapsulated versions for an extended operating temperature range are available as options. In case of additional DC side fast turn-off, the induction voltage generated by inductive loads is limited within the rectifier.

The rectifier with built-in current sensor for fast turn-off is designed for the operation of electromagnetic devices. It ensures fast turn-on and turn-off. The rectifier with bridge circuit comprises a thyristor and timer. During overexcitation, the rectifier delivers bridge rectified output voltage before changing over to half-wave rectification. On the DC side, the output voltage is enabled by the built-in current sensor which measures the AC current of the connected motor. If the motor is stopped, the rectifier turns off on the DC side as soon as the current falls below the turn-off threshold. The turn-off voltage generated by the inductive load is limited. The rectifier is suitable for connection in parallel with AC motors. The current sensor must be wired into the motor current path in such a way that the current flow created when the motor operates in generator mode will not pass through the sensor. This is crucial to avoid delayed or impaired DC side switching.

These compact half-wave and bridge rectifiers are ideal for installation in space restricted junction boxes of brake motors. They can be delivered with flying leads or terminals for connection. Various accessories are available to meet different installation requirements.

ESM for AC-brakes: The module consists of a time-controlled rectifier with integral electronic fast turn-off. During start-up, the ESM delivers bridge-rectified output voltage before changing over to half-wave rectification. The built-in voltage sensor ensures that the DC side output voltage is interrupted electronically when AC input voltage is removed. Thanks to its compact design, the ESM can be installed in very restricted space. ESM for DC-brakes: The module keeps the voltage supplied to the electromagnetic device at a constant level over a wide input voltage and temperature range. Full operating voltage is applied to ensure fast switching when the load is switched on. The module then reduces the power supply to constant holding voltage. A 30% reduction provides power savings of 50%. The ESM is very compact thanks to the use of state-of-the-art microelectronic and power electronic components. Overexcitation time and holding voltage can be factory-programmed to customer demands.

These overexcitation rectifiers are designed to increase the attractive force and reduce the attraction time of actuating solenoids, to shorten the coupling and disconnection times of clutches and brakes and to decrease the power consumption of clutches, brakes and actuating solenoids. To increase the attractive force, the solenoid is overexcited during the overexcitation time, applying bridge rectified voltage. Then the rectifier changes over to the selected holding voltage which must not exceed the rated voltage of the solenoid.

Produced in our UK factory this qualified oscillator offers a 500G shock rating and good phase noise

Thanks to extremely compact design the overexcitation rectifier "Slim Collection" can be installed in very restricted space. The module features a central bore for screw fixing inside the terminal box. It can also be installed by using an adhesive pad.

Miniature cylindrical crystal with AT-CUT strip crystal priding low mass with small size. Frequency range 3.579MHz to 70MHz. Frequency range 3.579MHz to 70.0MHz Fundamental mode to 30MHz Low mass, miniature cylindrical package

The ultra-miniature 32.768kHz CXOXULP oscillators use an AT-Cut crystal for tight stability and also have a low current consumption, typically 15µA. A fast start-up time (15ms) and tight frequency stability (±30ppm to ±100ppm) over a wide temperature range. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consumption (typically 15µA) Fast start-up (typically 15ms) Tight Tolerance High Shock Resistance Low Ageing Full military testing available

CXOQ oscillators are ultra-miniature, surface mount units packaged in a 2.50 x 2.00 x 0.89mm package. The oscillators are capable of withstanding high shock environments. The design and build standard including availability of full 'MIL' testing ensures great reliability. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. High shock survivability High frequency stability Low acceleration sensitivity (HG version) CMOS and TTL compatible Low power consumption Full military testing per MIL PRF 55310 available Optional enable/disable Low EMI emission Hermetically sealed ceramic package

CXOMK oscillators are miniature, surface mount units packaged in a 6.5 x 5.0 x 1.5mm package. Ultilizing the latest advancements in production technology, the CXOMK oscillator is capable of achieving close tolerance frequency calibration and high stability over a wide temperature range. High shock resistance. The part is available with full 'MIL' testing if required. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details. CMOS/TTL Compatible High shock resistance Optional Enable/Disable with Tri-State Low EMI emission Full military testing available Hermetically sealed package

CXOL oscillators are ultra-miniature (32. x 1.5mm), ultra-low current quartz crystal oscillators with a typical start-up time of 200ms. Hermetically sealed in a highy reliable ceramic housing, these oscdillators are available over a wide range of input voltages (1.2V ~ 5.0V). This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. Ultra-low current consiumption Typical start-up time of 200ms Typical Rise/Fall times of 25ns Hermetically sealed ceramic package Optional output enable/disable with Tri-state Full military testing per MIL PRF 55310 available Supply 1.2 to 5.0V Enable/Disable included