Gas fittings - Import export

brass gas orifice hex incircle diameter 0.69 +/- 0.03 inch inner through hole diameter 0.328 +/- 0.010 inch length 0.531 +/- 0.010 inch external thread 5/8-28UN manufactured by CNC lathe turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Installation into pipelines as inline detonation flame arrester e. g. for the protection of ignition gas lines or measuring devices. Applicable for all materials of the explosion groups IIA1 up to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Operating from both sides, for a maximum operating pressure of 1.2 bar abs. and a maximum operating temperature of 60 °C.

For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. The installation of the detonation flame arrester into horizontal and vertical pipes is permissible. Provided with one or two temperature sensors (PT 100) the armature is certified against short time burning from one or both sides. If only one thermal sensor is attached, it must be installed into that part of the body from which a fire is expected.

Application as inline armature with venting and breather valve function for vessels, used preferably for installations in pipes. The exhaust air is carried away via a pipe. The ventilation is also effected via a pipe, which is preferably used to carry inert gas. Functions the same as KITO® VD/o3-… (type sheet F 18 N).

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.

THE INNER LAYER IS COMPOSED OF HIGH QUALITY PVC THAT IS NOT AFFECTED BY LIQUIDIZED GAS OR METHAN GAZ STRENGTHENED WITH SYNTHETIC STRINGS TO INSURE MAXIMUM EFFECIENCY THE OUTER LAYER IS MADE OF A SPECIAL COMPOSITION OF PVC MATERIAL TO EFFECTIVELY RESIST HIGH TEMPERATURE AND ALL CONDITIONS

✔ Plumbing and Heating Supplies ; ✔ PP-R & PVC Pipes & Fittings ✔ Ball & Gate & Check Valves ✔ Collector & Manifold and More ✔ Contact us for any of your queries; ✔ Whatsapp : +905422557055 ✔ E-mail : info@feraplas.com

Fine bubble air disc diffusers Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum performance. DIFFUSER BODY The manufacture of this component in Glass Reinforced Polypropylene gives it excellent resistance to abrasion, most chemicals with significant mechanical strength. EPDM MEMBRANE The EPDM Membrane prevents the penetration of water into the distribution pipework when the air is stopped. CLAMPING TYPE AQUADISC® 250-305: Clamps are manufactured in stainless steel or polypropylene and secures the membrane to the diuser body; AQUADISC® 320: Clamp made of glass fibre reinforced polypropylene. THREAD 3/4’’ CONICAL GAS TYPE FITTING Allows Aquadisc® difusers are mounted by simple turning clockwise

Flange fitting DN 20 1 M-0040526 Flange fitting DN 25 1 M-0040527 Flange fitting DN 32 1 M-0040528 Gas meter fitting DN 20 x R 1 3/8" 1 M-0040529 Gas meter fitting DN 25 x R 1 3/8" 1 M-0040530 Gas meter fitting DN 32 x R 1 3/8" 1 M-0040531

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Fullmax LE 5W-30, is a synthetic engine oil that meets the latest performance requirements of modern engines. It is specially developed for diesel or gasoline engines of passenger vehicles and light commercial vehicles fitted with exhaust gas after treatment sytems such as Diesel Particulate Filter (DPF) and Three Way Catalyst (TWC).

Stackable can К.20 is equipped with cap KS.TGW 60 with pressure relief valve. The cap is designed for discharge of excessive pressure in plastic cans upon storage and transportation of hazardous and poisonous liquids. The cap with pressure relief valve allows usage cans for storage and transportation of gas-forming agents. Caps are fitted with sealing ring from foam polyethylene that ensure sealing, special pressure relief valve and pulling ring.

Prevent operating room infections by absorbing infectious fumes POREX ® porous fume absorbers are used for the convenient and efficient eradication of noxious fumes generated in the cement-bone mixing process during surgical procedures in hospital operating rooms. Designed with porous plastic disks that surround activated carbon material, POREX porous fume absorbers create a porous fume filter that supports balanced air flow rates, optimal back flow pressure, and out-gas residence times. Accommodating device fit requirements with its specified part geometry, our porous fume absorbers: Prevent toxic fume and gas escape in operating rooms–Effectively absorbs fumes and gases, preventing exposure in operating rooms. Balance airflow with residence time for optimal absorption within a specific device geometry. Easy press-fit assembly–Complex layered component is designed for a simple press-fit assembly into the mixing device.

Fulllife DPF 5W-30, is a synthetic engine oil that meets the latest performance requirements of modern engines. It is specially developed for diesel or gasoline engines of passenger vehicles and light commercial vehicles fitted with exhaust gas after treatment sytems such as Diesel Particulate Filter (DPF) and Three Way Catalyst (TWC). It is developed with special anti-wear additives minimize engine wear.

Made of A3 Steel Material, Zinc Coated Package Content: 2Pcs x Gas Spring End Fitting Female Thread Dia.: M6 / 0.24"; Hole Dia.: 8mm / 0.31" Gas Spring Strut Joint connector End Fitting. We can supply forging and CNC machining Eyelets / Clevises,small & medium size are forging and cnc machining, large sizes are CNC machining, you can send your requested drawing, we can check if has forging end fittings. It is a good replacement of gas springs Ball Strut, and the gas springs are ideal motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies.

— MIG/MAG pulse welding machine with optimised synergic characteristics for welding steel — Pulsed MIG/MAG welding, MIG/MAG welding, MMA welding and gouging — Significantly less spatter formation and therefore less finishing work thanks to the pulse function — Welding with solid wire and flux cored wire — Drive 4X Steel: Connection socket for electrode holder on the wire feeder as standard — Drive 4X Steel D200: Adjustment of the gas quantity directly on the wire feeder via the gas control valve as standard. — Factory-fit option: Extra gas valve for increased safety — Infinitely adjustable arc dynamics (choke effect) — Adjustable start and end-crater functions — Synergic or manual welding operation

Gas-cooled weld head for applications with extreme narrow space requirements as e.g. in the semiconductor industry. Specially designed to weld micro-fittings. Unique construction, including specifically directed gas routing to improve gas coverage and material selection resulting in a high duty cycle even without water cooling. — Extreme narrow / compact design — Simple design allows easy to maintain — Weld Head compatible with control element (start/stop kit with status display) — Arc Machines Model 9-500 cassettes will fit too

Main products: Copper tubes for air conditioning and refrigeration, inner grooved copper tubes, environmentally friendly copper water (gas) tubes, insulation tubes, tube fittings, plastic-coated tubes Product characteristics: High dimensional precision, high heat dissipation performance, high cleanliness, lightweight Applications: Air conditioning, refrigeration, automotive industry, construction industry, home appliances Production capacity: 150,000 tons Honorary titles: Second Prize of Science and Technology Award of China Nonferrous Metals Industry, Second Prize of Science and Technology of Zhejiang Province

Volumetric filling system is suitable for products which are able to free falling and homogenous in density. Weight of each filling is controlled by adjusting the dimensions of filling cups. Different cups with adjustable dimension should be used for different type of products.The sensitivity of target weight is equal to sensitivity of product density. All surfaces touching to products are AISI 304 stainless steel. Easy dismountable collar set design. Package length should be controlled by print mark or feeding duration. Printer state is checked continiously. Wrapping material is driven by AC motors. Pneumatic driven horizontal sealing and cutting. Impulse or heat sealing units for different type of wrapping materials. Suitable for CE standarts. 7 inch touch screen wtih several languages. Optional Fittings and Equipments Gas flushing system. Product feeding screw. Finished product conveyor Special Vacum supported belts. (Increases belt life time and machine speed)

Technical data Dimensions (L/W/H) 122/80/174 cm Total weight 108 kg User weight up to 150 kg Equipment Integrated chip card system Free passage for simple training positioning Forward and backward crank Horizontal seat adjustment, removable seat for training standing up Gas-assisted height adjustment for the drive unit Optionally up to 200 kg user weight (Art. No. 10062800)

Providing a reliable resource and expertise to clients in the utilities sector, EMT Site Services use a range of technologies and solutions to deliver key environmental and financial benefits including: asset reliability, long term compliance and performance, maximum up-time and security of critical infrastructure. Service provision includes: Flange Repairs; SF6 Leak Surveys; Corrosion Prevention; Rental/Lease SF6 Instruments; SF6 Filling and Topping Up; Gas Recycling; Protective Coatings, Training.

BS 2838-2: 1991 Examination & general treatment couches, build, performance & safety specifications EN 60601-1:2006+A12:2014 Medical electrical equipment. General requirements for basic safety & essential performance Electric or hydraulic height adjustment Height adjustment from 490 - 950mm Adjustable angle backrest Manual -25 to +90 degrees Electric -22 to +90 degrees Adjustable angle footrest from -25 to +75 degrees Anti-trap gas struts fitted with release levers used on the back & footrest sections (optional electric backrest) Retractable castors fitted to both ends to assist with movement & positioning Clearance beneath frame allows access for mobile hoists Electric models (230V ~, 50/60H) fitted with a UK 3 pin plug & available with a hand or foot switch Hydraulic models use a foot pump pedal positioned on both sides of the couch Seamless upholstery using flame retardant anti-microbial vinyl

B-AIR PLUS system is specifically designed for applications where high quality breathing air and monitoring of breathing air supply are needed. B-AIR PLUS is a combination of our B-AIR 0106 breathing air filter set combined with gas concentration analysers, fitted with pressure regulator and quick couplings, all packed in a compact and robust casing. Gas concentration analysers constantly monitor CO, CO₂ and O₂ concentrations and trigger an alarm if concentrations exceed the EN12021 and BS4275:1997 standard compliant values. In this way B-AIR PLUS can safely provide high quality breathing air for up to 5 people. Small dimensions and low weight enable the use of B-AIR PLUS in many applications as it can be transported and set up with ease.