• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • development of electronics

Results for

Development of electronics - Import export

France

Verified by Europages

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

Request for a quote

Poland

Verified by Europages

The Preservatech Mini One is a miniature humidity control device for museum showcases and storage enclosures. This robust and extremely efficient unit can reliably control humidity in individual or multiple enclosures. The Mini One active microclimate generator is a sixth generation system, satisfying the demanding standards of preventive conservation and modern museum design. It incorporates the most recent developments in electronic humidity control, noise suppression, and pollution abatement — built on the heritage of a family of microclimate control devices extending back to 1978. This positive pressure microclimate control system will typically maintain the relative humidity level in a sealed museum enclosure to within two percent (or less) of your target relative humidity. Depending upon the ambient temperature conditions and enclosure construction, relative humidity levels of less than thirty-five to over eighty percent can be attained.

Request for a quote

Germany

Verified by Europages

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

Request for a quote

Taiwan R.O.C.

Verified by Europages

ProArc have a significant developing in welding automation system for electronics Industry. We help our customer who are the famous battery manufacture in the world to develop the laser sealed welding for laptop battery. Industry 4.0 Intelligent manufacturing Full automation production Sealed laser welding With CCD Camera check welding quality in real time Custom design for electronics industry

Request for a quote

Germany

Verified by Europages

We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design - Risk assessment and CE - Commissioning, service, maintenance at home and abroad

Request for a quote

Germany

Verified by Europages

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

Request for a quote

Germany

Verified by Europages

The precision pressure transmitter DMP 331Pi demonstrates the further development of well-tried industrial pressure transmitter DMP 331P. The signal from the specially designed piezoresistive stainless steel sensor is processed by the newly developed digital electronic system, performing thus an active compensation of sensor-specific deviations such as hysteresis, thermal errors and non-linearity. The temperature field of application of -40 ... 125 °C can be extended by the integration of a cooling element up to 300 °C. Features: — nominal pressure: 0 ... 400 mbar to 0 ... 40 bar — accuracy: 0.1 % FSO — excellent temperature response 0.04 % FSO / 10K (≤ 0.04 % FSO / 10K) — hygenic version — vacuum resistant — processing of the sensor signal using digital electronics Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts

Request for a quote

Germany

Verified by Europages

DMP 320 stands for speed and precision. With a response time of ≤ 0.5 msec and a sampling rate of 10 kHz, the pressure transmitter was designed for applications, in which an extremely fast and exact pressure measuring is required. Pressure curves, peaks and hits can be monitored and evaluated exactly. The signal processing of the sensor signal is done by newly developed digital electronics, which detect the signal with a sampling rate of 10 kHz. Sensor-specific deviations such as non-linearity, hysteresis and temperature errors are compensated actively. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — internal sample rate 10 kHz — excellent thermal behavior — excellent long term stability — extremely short response times ≤ 0.5 ms Optional Features: — customer specific versions

Request for a quote

Italy

Verified by Europages

The highly advanced industrial UPS of the Futura series by LAYER ELECTRONICS are developed in way to ensure total security from problems related to mains. Layer’s most recent development in industrial UPS, the Futura series represents the state-of-the-art in quality and technology, accumulated by LAYER ELECTRONICS in more than 50 years of experience in the field of the stabilization and static conversion of the energy. Since its introduction on the market on 2005, the Futura series of industrial UPS has shown great reliability and robustness, becoming the top product and finding application in the most different situations, both civil and military (CAGE/NCAGE/NATO code: AD484). In fact, for example, UPS of the Futura series are installed on board of the aircraft carriers of the Italian Military Navy. The Futura series of industrial UPS is available in 1-Ph version from 5 kVA to 50 kVA (available also with 3-Ph input) and in 3-Ph version from 5 kVA to 1600 kVA.

Request for a quote

Germany

Verified by Europages

aluNORM was developed to protect electrical or electronic components. Due to the large number of standard sizes in four variants, the maximum level of product variety is guaranteed. Typical ROLEC single-channel mounting combines the screw channel for attachment to the wall with the one for closing the enclosure. This provides more space in the interior for your internal mounting. An EMC version is available for the AS and AD variants. This is also available for the AF and AH variants in the dimensions marked. Fastening domes in the lid and bottom enable simple installation of supporting rails, mounting plates, circuit boards and more. Matching cable glands are also available.

Request for a quote

Hong Kong

Silicone rubber keypads are the most widely used form of switch technology today. We offer reliability, long life and design flexibility. Conductive rubber switches and keypads were originally developed for the electronics industry to meet the increasing demand for inexpensive momentary switches. Conductive rubber keypads became desirable because they look and feel like traditional push-button style switches, but do not have their inherent disadvantages.Innovative key coatings for our silicone rubber keypads are silicone, parylene, and Dura (Hard Coat). Silicone rubber keypads can be designed for applications exposed to water and hydrocarbons. Enhanced graphics and lighting options allow your product to incorporate features not found on standard silicone. The silicone rubber keypads are widely used on genset controllers, test instruments, industry production machines etc.

Request for a quote

Russia

We advise clients on the full range of transactions and models for project commercialisation for companies operating in software development, electronics, IT services, state-of-the-artt technologies and innovative solutions. Our experience covers the most advanced areas in this area, including artificial intelligence and machine learning, neural networks, Internet of Things, Industrial Internet of Things, tele-healthcare services, cyber security, Bit Data, etc. A considerable share of our recent projects has been dedicated to legal support for IT developments, in which we represent the founders of digital companies, venture funds, investment banks, financial institutions, business angels, etc. In this sector, we structure and support transactions on a “turn-key� basis, on the part of both individual and joint investors and founders. We provide integrated solutions under Russian and foreign law in a wide range of jurisdictions.

Request for a quote

Germany

The NanoWeld stations provide the ideal platform for the development and production of opto-electronic components, like singleand multi-channel transmitters and receivers. The station works with exchangeable trays and grippers accepting all device housing types and lenses, optical fibers or receptacles to be aligned and attached. Cycle times for the rapid mass production of TOSA type assemblies reach less than 25 seconds while it takes several minutes for complex devices.All components and subassemblies to build the NanoWeld station are of highest quality and performance. Even customized systems start from a common platform which minimizes development time and cost. By using device-specific trays and grippers, the time to change between different batch processes or device types is reduced to the minimum. Loading and unloading of these trays is performed on a separate loading station outside of the automated NanoWeld. The automated alignment starts from a known reference position.

Request for a quote

Germany

Comfort and reliability in surgery: A multilevel security system ensures uninterrupted surgical proceedings Future-proof software and electronics thanks to in-house-developed electronic parts and software Electrohydraulic leg section and leg support adjustment function, also serving as back section adjustment function in Reverse Mode, allows a precise patient position and intraoperative corrections of position. Generous height adjustment range with multilevel telescopic lifting column by SCHMITZ - for optimal access to the surgical field in both standing and sitting surgery High stability against traction and compression forces allows challenging positions using the extension device Mobility: 4 easy-running ball-bearing castors diam. 125 mm and 5th directional castor, separately activatable Excellent ground clearance: optimal foot access to the surgery table for surgeon and surgical team Quickly adapts to all surgical interventions thanks to versatile and specialised accessories

Request for a quote

United Kingdom

Our battery packs provide the power for Europe’s largest scooter rental fleets, where the requirements and needs are extremely diverse. Thanks to specially developed BMS electronics and associated software, we can react extremely flexibly to specific customer requirements and special functions. Since as far back as 2013, our battery technology can be found in the large electric scooter rental fleets of European cities such as Berlin, Munich, Paris, and Bordeaux. This is where our battery packs have already proven their safe continuous operation and long durability over more than 5,000,000km and more than 150,000 hours of charging. Continuous operation over 24 hours a day, seven days a week, requires a robust battery management system (BMS) to ensure high safety and continuous availability of the vehicles.

Request for a quote

Germany

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. At RAFI Eltec, we test the quality of our products across all manufacturing processes. By performing individual tests and integrating fully automatic tests in combined assembly and testing lines, we achieve targeted and effective test cost reductions. For this purpose, we insist on the most cutting-edge technologies and high-quality equipment. Testing technologies - Pull test for chip-on-board - Automatic optical inspection - Flying probe - In-circuit test - Boundary scan test - Function test - Burn-in test and run-in test - Temperature shock test - Temperature humidity test You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions.

Request for a quote

Germany

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Providing maximum quality for your ideas and products is what motivates us. To achieve this, we introduce our high quality standards to projects even before manufacturing begins. As a result of our expert analysis of customer data, potential pitfalls are eliminated in advance. We document sample productions in detailed test reports and discuss them with you. Due to our state-of-the-art testing technology and our in-house test equipment construction, we increase the quality of your production while simultaneously reducing logistics costs. You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions and achieve our mutual goal: your satisfaction and success.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Whether with a mini-wave or a Wörthmann wave, we deliver customary RAFI Eltec quality on our automatic soldering equipment even for wired assemblies. We apply various technologies here – coordinated to each individual project. Our focuses: - Wired assembly - Wave soldering (ROHS-compliant or leaded) - Automated selective soldering - Lift-dip soldering (multi-wave) - Manual soldering - Assembly - Visual inspection You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions and achieve our mutual goal: your satisfaction and success.

Request for a quote

Germany

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. RAFI Eltec operates 5 fully automatic SMD high-speed, precision assembly lines with nitrogen reflow soldering technology. Our focus: - BGA, µBGA, CSP - QFN, Finepitch - 0201 - Novel components - Package-on-package - Automatic optical inspection Providing maximum quality for your ideas and products is what motivates us. To achieve this, we introduce our high quality standards to projects even before manufacturing begins. As a result of our expert analysis of customer data, potential pitfalls are eliminated in advance. We document sample productions in detailed test reports and discuss them with you. Due to our state-of-the-art testing technology and our in-house test equipment construction, we increase the quality of your production while simultaneously reducing logistics costs.

Request for a quote

Germany

RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. Efficient production processes and reliable execution of the overall implementation are characteristic for RAFI Eltec. As a result of our many years of experience in energy measurement technology and in radio and network applications, we have accumulated unique production and testing expertise. This is also naturally to your advantage in regard to the final assembly of your devices. Final assembly - Assembly presses and screw fittings - Ultrasonic welding - Adhesive robots - Semi-automatic and fully automatic assembly - Automated testing - Laser or inkjet printing technologies - Leak tests - Box build You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process.

Request for a quote

Slovakia

Cryotherapy chambers look like a room similar to a stand-up tanning booth, in which the client enters the air is cooled to the estimated temperature. This next-generation device contains newly developed, CE approved electronic system controlled by touch screen TECO, focusing on reliability and maximum protection of the customer. Сryomed PRO is also equipped with an emergency stop button on the front panel and accident prevention system in the cabin. The latest model of the cryotherapy chamber also allows connecting to Wi-Fi and gives comfortable access for remote service support in case of any faults. Cryosauna Cryomed PRO may be comfortable controlled by desktop, smartphone or tablet. Gas supply of new model is constructed in a way it can either work with the Dewar vessel (non-pressurized 40 liters) or with pressurized vessel with capacity up to 5000 liters.

Request for a quote

United Kingdom

WEBCON Features: •Instant Change Technology •Business Process Automation •Rapid Application Delivery Platform •Reusability •Integration •Application Lifecycle Management Our WEBCON Services: •Full design and business analysis •Low code solution development platform •On-Premise or pure cloud hosted solutions •Integration Development •Dashboard Reporting and Analysis •Electronic signatures + DocuSign integration WEBCON is a low-code platform for business process automation and applications for all types of businesses. With this platform you can build workflow-based solution that integrates with existing Line of Business systems, and quickly responds to ever-changing business needs. Our Business Process Solutions consultants could digitally transform your business by offering you a WEBCON BPS solution tailored for your business to bond your business data together. Have also a look at our Business Process Solution service page and our relevant portfolio.

Request for a quote

Ukraine

We carry out a full cycle of development of electronic devices: supply of electronic components, stencils and printed circuit boards, design of electronics, redesign of finished devices. Applying the principles of lean production, we achieve a price reduction while maintaining a high quality of services. Due to quality control at all stages of production, we have the reject rate less than 0.5% (at observance of all requirements to the order). Operative daily planning allows us to achieve maximum efficiency in the use of working time. Thanks to that, in the presence of all the equipment in the warehouse, we can take the order to work during the day from the moment of order. We have our own high-tech equipment, and offering good quality with competitive assembly cost.

Request for a quote

Switzerland

You need software for your embedded device, IoT device or a device driver? Windows, Linux or cloud services? Our focus is on the development of embedded and real-time applications and the associated GUI or backend software in the cloud. Our references in software development and electronics development speak for themselves. We have the ability to manufacture small and medium product quantities.

Request for a quote