Temperature measuring equipment- electrical - Import export

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

Temperature measuring strips, for example, are stuck to components that heat up under load. The measuring strip shows the maximum temperature reached after the component has cooled down. This means that the maximum temperature of the component can be read off quickly and inexpensively.

The CS400 Kiln Shell Imaging System relies on the MP Linescanner, which provides continuous, accurate and real-time thermal images and temperature measurements for moving processes. With the ability to scan up to 1024 data points in a single scan, the MP Linescanner can provide a complete picture of even the highest speed manufacturing processes, ensuring an accurate temperature reading. Key Features: — Polar charts highlighting coating thickness and brick thickness — Envelope profiles – including alarm functionality – over the entire kiln — Built-in, on-network storage to store historical data — Free scalable AOIs (areas, line and slice) including temperature trend analysis — Virtual 3D walkthroughs across the entire kiln — 3D views available per each defined kiln zone — Easy-to-use software configurations that showcase the scanner position relative to the kiln — Flexible image sizing and configurable orientations of rotation — Fail-safe “hot spot” alarm outputs

Measurement of magnetic and electrical signals with STL's unique 26 bit ADC's For measuring electric and magnetic fields the STL's unique 26 bit ADC pioneers works in an underwater system. In addition to deployment and recovery the chain configuration by a single cable used for power and data transmission uses three or more sensors platforms are fully connected to the base station. Environmental and pressure sensors use an ultra low noise isolation preamplifier, and the analogue sensor front end is formed by 3 pairs of UEP Carbon electrodes. The 26-bit analogue to digital converter is what the digital part is based on with a novel high end performance. Geometry compensated signal output through the consequent digital signal processing provides temperature. To achieve the software alignment the tilt sensors are used to achieve the precise settings with a pair of high resolution electric field vector components.

M600 Handheld Thermal Camera is high-resolution and manually focused. It is provided with a built-in self-developed 12μm high-performance 640×512 infrared detector and a 5,000,000-pixel visible light camera of 35 mK thermal sensitivity and 30 Hz high frame rate. With its accurate manual focusing function, it can save focusing time and provide accurate data and clear images to meet the requirements of research and analysis work. With its excellent characteristics, Tianxuan M600 Handheld Thermal Camera is the right-hand assistant for engineers in scientific research, professional equipment, and building inspection. Thermal resolution: 640×512 Temperature resolution: 35mK Measurement accuracy: ±2°C