When is used an activated carbon filter? Activated carbon filters are very similar to multi media filters and other pressure filters in construction and operation. The purpose of an activated carbon filter is to remove free chlorine, an oxidizing agent that will damage most resins and/or membranes in a water treatment system. A chemical injection system using sodium bisulfite (a reducing agent) can be used in place of an activated carbon filter to remove chlorine. Granular activated carbon is a particularly good adsorbent medium due to its high surface area to volume ratio. One gram of a typical commercial activated carbon will have a surface area equivalent to 850-1.000 square meters. This high surface area permits the accumulation of a large number of contaminant molecules. Some drinking water may be disinfected with chlorine or chloramines.
Turkey
Carbon Filter for Cooker Hoods compatible Brands: AEG - ZANUSSİ - ELECTROLUX - JUNO - PROGRESS - FRANKE - ALNO - ZANKER - ARTHUR MARTIN - ROBLIN - BAUKNECHT - FABER - ELICA - WHIRLPOOL - HOTPOINT - ARISTON - AIRFORCE
Request for a quoteGermany
Customized MiJET AC filter for model 30.5 cm Suitable for MiJET 30.5 cm and washing station with MiJET 30.5 cm We have developed the MiJET filter to be able to use it in addition to the oil mist filter. The activated carbon filter is put over the existing air filter. It is fastened with three locking hooks. These keep the active carbon filter in position. The activated carbon filter cannot be used individually. The AC filter helps the user to filter aerosols from the exhaust air. These are increasingly produced by the use of cleaning solutions. MiJET products can be purchased via our Shop.
Request for a quoteFrance
Multi-purpose, multi-directional, submerged mixer ideal for general mixing and flow generation; adaptable to many tank configurations. Open, dual helical impeller providing intensive; directional sub-surface mixing pattern with minimal surface disturbance and low power to volume performance 1.5 – 22KW Drive Motors 4 + 6-Pole Speeds, Direct Drive AISI 304/316 or other SS Submersible motor – ip 68 protection High quality, low maintenance motor Robust + compact design – minimal vibration Easy installation + removal Directional mixing + flow generation plus general mixing of lagoons Basins + tanks activated sludge processes vey large surface area reservoirs Denitrification + sbr + asp
Request for a quoteFrance
Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.