Air-operated diaphragm pumps

The Drum pump F 426 is ideal for mixing and/or pumping inhomogeneous media. You can keep media moving that tend to segregate, even during pumping. With the outlet closed, e.g. via a hand nozzle, the F 426 can be temporarily operated as pure mixing pump. By turning the adjusting lever, the pump can be easily adjusted to "mixing" or "pumping". The pump is easy to dismantle for rapid cleaning. The pump is available in stainless steel and polypropylene. The stainless steel version can also be used in hazardous areas. Benefits: - 3 operating modes in one pump: Conveying Conveying with simultaneous mixing Temporarily mixed operation - Switching operating modes is possible even while operating - Easy to dismantle for cleaning - Two control levers to easily open/close the mixing openings - Mixing openings allow backflow of medium for mixing back into the container - Distinct feature, only at FLUX: The inner tube is reinforced with a metal core on the PP model.

Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum

The Drum pump F/FP 427 is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. The pump has minimal dead spots. The drive shaft, the inner and the outer tube are made of stainless steel (316 Ti resp. 1.4581). The pump is also available as FOOD and 3A certified version and complies with international safety standards. Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Available with different connection at the pressure side (e.g. Clamp 1 1/2" or RD 58x1/6) - Available with 3A Certificate - Available as FOOD version - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21

The new generation FLUX VISCOPOWER progressive cavity pumps for industry and hygienic (pharma, food, cosmetic) applications are suitable for pumping thin to high-viscosity fluids. The displacement pumps work with low turbulence at a constant pressure and provide for a gentle and pulsation-free operation. The VISCOPOWER progressive cavity pumps can be designed for industrial applications as well as for the pharmaceutical, food and cosmetic (Hygienic) sectors. All progressive cavity pumps VISCOPOWER are mobile and stationary, consist of only a few components and are easy and quick to dismantle. There is a choice of versions for immersing in the material and for installing outside the container; versions with explosion protection, 3A certification and FLUX FOOD pumps (Directive (EC) 1935/2004 and FDA CFR 21 compliant). For connection of the motor there is a choice between bearing flange and gear.