Blind rivets - Sealed blind rivets CERTO

The strong CERTO®-PERFECT special sealed blind rivet forms a large and smooth closing head by its special clamped rivet sleeve. This head makes sure that the danger of pull through in case of oversized bore holes can be reduced to a minimum. Additionally the tightness in standing water is increased significant.

The specialist for blind rivets up to 8.0 mm in diameter! Special high-strength FERO® BULB blind rivets (and similar types) are set easily and reliably by the combination of short stroke and very high setting force (24,000 N!).

The classic model. The designation ALFO® stands for the product range of HONSEL open standard blind rivets that are available with dome, countersunk or large dome head. It covers the versions and special types described in DIN EN ISO 15977 to 15984 as well as 16582 and 16584. “Special types” by our definition are rivets with a function as described in the above standards, but with differences in certain dimensions, functional properties or material combinations.

The OPTO multigrip blind rivet with his especially embossed rivet shaft, is distinctly different to a standard blind rivet. Due to his constructive structural, the rivet guarantees lots of excellent performance characteristics: — large grip range — good filling capacity of the borehole — non-positive locking of the captive mandrel without clearance — no rattling sounds — dustproof and splash water-tight Preferred applications for OPTO multigrip blind rivets can be found in the field of vehicle manufacturing, in air conditioning technology as well as in the production of tanks and cntainers. Furthermore, this rivet type is excellently suited for use as a repair rivet. Honsel develops for this blind rivet type special variants for the serial producti on, too, e. g. large grip range low grip range with a diameter up to 8,0 mm!