CABLEJOG LTD - Cable testers for all types of cables and connectors.

Features: Atwo box solution to testing AV panel installations. Eachbox only 150mm square Easyto use with only one button operation. LCDdisplay for test results. Allmajor AV connectors present, no need for extra adaptors. 6V battery or Mains use. Connectors: DVI HDMI SCART RJ45 MINI DIN 4 Pole USB A & B 3 pole XLR Male & Female 3.5mm Jack, stereo or mono RCA Phono RGB & RWY BNC 50/75W / HD SDI RGB Horiz& Vert F TYPE COAX Test modes: Panel, connect both units with appropriate patch cables.Press the test button. The Local end will identify the type of connection andif there are any open or short circuits. Cables, plug both ends of the cable under test intothe Local unit. Press the test button. The Local end will identify the type of connection andif there are any open or short circuits.

AVjog Rack Features: A single box solution for testing AV cables. Easy to use with only one button operation. Detects Open, Short and Crossed circuits. LCD display for test results. All major AV connectors present, no need for extra adaptors. 40+ preprogrammed cable types. Connectors: DVI HDMI SCART RJ45 Ethercon MINIDIN 4 Pole USBA & B 3pole XLR Male & Female RCAPhono RGB & RWY BNC50/75W/ HD SDIRGB Horiz& Vert FTYPE COAX

Features: There are 2 rows of 4 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. Connectors: 3pin XLR 1/4" Stereo Jack RCA Phono sockets Memory: There are 4 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Pro 3 automatically scans all the connections and compares against information held with just one press of the test button. MEMORY works in single and double ended test modes. INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found. ioJoG tester

Features: There are 2 rows of 6 LED's corresponding to each ofthe possible connector pins and one for the screen (or ground) connection. Aseach pin is activated, the LED's indicate all connections associated with thatpin, so that short, open and crossed circuits can be easily found. The LED'salso show the possibility of high resistance or leakage connections. Connectors: 3 Pole XLR Maleand Female 5 Pole XLR Maleand Female 6.35mm Jack,stereo or mono Single or Twin4.4mm Bantam, stereo or mono 3.5mm Jack,stereo or mono 2/4 PoleSpeakon DIN 180o 3 & 5 Pole RCA Phono BNC 50/75W /HD SDI Memory: There are 3 LED's indicating the state of the MEMORYoption. If the MEMORY LED is on, then AudioJoG Pro 5 automaticallyscans all the connections and compares against information held with just onepress of the test button. MEMORY works in singleand double ended test modes. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.

Features: There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over. Connectors: 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono 2,4 & 8 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) & 8 Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mm Red & Black Memory: There are 6 LED's indicating the state of the MEMORY. If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.

Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: PowerCON in and out 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono 2 & 4 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mmRed & Black Memory: There are 6 LED's indicating the state of the MEMORY. If the MEMORY LED is on, then AudioJoG Pro 8 mobile automaticallyscans all the connections and compares against information held with just onepress of the test button.

Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2.5mm Jack, stereo or mono Powercon IN & OUT 8 Pole Speakon MINI DIN 4 Pole DIN 3, 5 (180o) Pole RCA Phono BNC50/75W / HD SDI RJ45, Ethercon USB A & B Mini & Micro USB 4mm Red & Black Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Pro 8 powerautomatically scans all the connections and compares against information heldwith just one press of the test button.

Features: There are 2 rows of 6 LED's corresponding to each ofthe possible connector pins and one for the screen (or ground) connection. Aseach pin is activated, the LED's indicate all connections associated with thatpin, so that short, open and crossed circuits can be easily found. The LED'salso show the possibility of high resistance or leakage connections. Connectors: 3 Pole XLR Maleand Female 6.35mm Jack,stereo or mono Single or Twin4.4mm Bantam, stereo or mono 3.5mm Jack,stereo or mono 4 Pole Speakon (TM) DIN 180o 3 & 5 Pole RCA Phono BNC Memory: There are 3 LED's indicating the state of the MEMORYoption. If the MEMORY LED is on, then AudioJoG Rackautomatically scans all the connections and compares against information heldwith just one press of the test button.

Feature: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4 & 5 Pole XLR Male & Female 6.35mm Jack, stereo or mono Single or Twin 4.4mm Bantam, stereo or mono 2.5mm Jack, stereo or mono 3.5mm Jack, stereo or mono 2,4 & 8 Pole Speakon DIN 3, 5 (180o) & 8 Pole MINI DIN 4 Pole RCA Phono BNC 50/75W / HD SDI RJ45, Ethercon USB A & B 4mm (x2) "banana” Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then AudioJoG Rack 8automatically scans all the connections and compares against information heldwith just one press of the test button.

Features: There are 2 rows of 9 LED's corresponding to each of thepossible connector pins and one for the screen (or ground) connection. As eachpin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's alsoshow the possibility of high resistance or leakage connections. 2 LED'sindicate a good digital network connection, either Straight through, or Crossedover. Connectors: 3, 4, 5, 6 & 7 Pole XLR Male & Female DIN 3, 5 (180o) & 8 Pole MINI DIN 4 Pole BNC 50/75W / HD SDI RJ45, Ethercon USB A & B Memory: There are 6 LED's indicating the state of the MEMORY option. If the MEMORY LED is on, then LightingJoG Rack 8automatically scans all the connections and compares against information heldwith just one press of the test button. MEMORY works in singleand double ended test modes.. INTERMITTENT fault detection uses the memory tocontinuously test the cable until a fault is found.