Germany
Manufacturer/ Producer
Germany
Our 3E inlay connector can be directly fastened to existing fittings with DIN 8063 male threads and is immediately ready for use with both flexible tubes and pipes. The inlay component of the 3E connector is manufactured as one piece with the connector integrated. This saves not only time and work, it helps to ensure that the connector is tight and thus safe to use.
Request for a quoteGermany
The flexible tube is pushed onto the integrated connecting sleeve of the 1A flexible tube con-nector. By tightening the knurled nut, the clamping ring presses against the flexible tube and fixes it in place. The connecting sleeve for the flexible tube is nearly cylindrical. Its dimensions are calculated to prevent tube strain over 6%, even with poor tolerances. The tension produced by the low tube strain is sufficient by itself to guarantee a tight flexible tube connection up to 6 bar. The clamping ring and knurled nut secure the connection against longitudinal forces which could otherwise pull the flexible tube off the connecting sleeve. The clamping ring is designed to secure the flexible tube in place by intercepting any shear or tor-sional stresses. This allows for usage up to 10 bar*. Thanks to its elasticity, the clamping ring can be used several times in the same connector.
Request for a quoteGermany
The flexible tube is pushed onto the connecting sleeve manually, causing the flexible tube to widen. To secure the connection against shear stresses, torsional stresses or longitudinal forces, you must use, e.g., a pipe clip to fasten the flexible tube in place on the connecting sleeve.
Request for a quoteGermany
The 6X multiport ball valve with pneumatic part-turn actuator (STANDARD) consists of two multi-way ball valves in a compact design arranged one on top of the other in a housing with two levels. There is no flow connection between the individual levels. With one switching process both media flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is not possible.
Request for a quoteGermany
Condensed liquids can be collected safely and reliably using the 7K condensate collector. It is supplied as standard with female G-thread.
Request for a quoteGermany
The tube filter is a compact, economical and versatile filter available either as a particle filter or as a coalescence filter. It is easy to use and filter changes can be made quickly. It is fitted with an female thread and is also available with a shut-off or drain feature. In the COMPACT version, the tube filter is already equipped with integrated flexible tube connectors.
Request for a quoteGermany
When operating pneumatic valves (diaphragm valves, etc.) special attention is placed on the protection of the control air system. The 5A compact safety valve reliably protects the control air system against media flowing back in case of leaks. The valve is automatic and therefore provides safety in the application.
Request for a quoteGermany
The 7G injectors are pumps for pumping and mixing various media. The basic principle is simple: a gaseous media is used for the actuator; this media escapes at high pressure and high speed from a nozzle. During this process the media from the surrounding area is also drawn along and can be supplied to the downstream production process. Due to their design, the injectors do not need moving parts, as a result they have very low wear and are robust.
Request for a quoteGermany
The manually operated 6Z multiport ball valve consists of two multi-port ball valves that are compactly arranged one on top of the other in a housing with two levels. There is no flow connection between the individual levels. With one switching process both media flows are synchronously distributed or collected using a common shaft. Unintentional mixing of the media flows is not possible.
Request for a quoteGermany
The 5A regulation valve is ideally suited for regulating the flow of gases and liquids. Due to its special design it is able to regulate and shut off media. The regulation valve is highly resistant to media due to the materials that are used, PP, PVDF and PFA.
Request for a quoteManufacturer/ Producer
Industriestraße 2
67133 Maxdorf - Germany
China
NSPV Waterproof cable gland for corrugated pipe Product material part is made of UL-approved Halogen-free PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.
Request for a quoteChina
NSPV M25AL Waterproof and breathable connector plain screwed adaptor Product material part is made of UL-approved nylon PA66 (Flame calss UL94-V-2),B and D is made of EPDM weathering rubber. Features: Special clamping jaw and clamping ring design,large clamping cable range,strong tensile strength,waterproof,dustproof,salt resistant,weak acid,alcohol,oil,grease and general solvent.
Request for a quoteChina
Steel Hex Pipe Fittings manufactured by CNc turning, threading Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.