ENVEA - Process - Emissions - Ambient | Monitoring Solutions

FlowJam T is a sensor for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically nonconductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. • mounted around the tube • triboelectric measurement • free crosssection • easy retrofitting

Continuous flow measurement of powder or granules in high pressure densephase conveying. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • pressureresistant up to 64 bar • maintenancefree • contactless • ATEX category 3 approved

Continuous solids mass flow measurement in densestream conveying and high levels of throughput. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. • unlimited throughput volumes can be measured • no wear thanks to the ceramic inner pipe • simple retrofitting • maintenancefree

Measurement of the volume flow, especially in dusty applications. Easy installation on existing ducts, no venturi or similar conversions are required. • easy to retrofit • no calibration necessary • output in operating cubic metres • suitable for all diameters and geometries

Microwave sensor for contactless monitoring of material flow in air slides. • easy to install • easy to retrofit • gives trending information by 4 20 mA output • immediate alarm when flow is interrupted

Electrodynamic flow sensor for the measurement of low flow rates from 0 to 100 kg/h. For pipe diameters up to 1 m. Ideally used in leanphase conveying. In free fall conditions with at least 2 m/s drop speed. • suitable for very low concentrations • ceramic coating prevents sensor wear

Electromagnetic flowmeter, designed to measure bulk material flows up to 300 t/h. The meter has no mechanical parts in the flow, is 100% dustproof and erosion free because of ceramic inner pipe. • arbitrary mounting position (inclined/free fall) • low headroom required • easy to calibrate

Paddy has been developed to supply a trending information of pulverization. It measures changes in particle size for instance to detect screen breaks. Paddy is insensitive against contaminations and works without a bypass.

Beneficiary of over 20 years of experience in mercury measurement, the new SM-5 CEMS Hg analyzer is designed to provide extremely accurate and reliable continuous measurements of very low concentrations of Hg in flue gas emissions. The SM-5 features short response times, dynamic ranges and stable measurement under all circumstances.

Continuous mass flow measurement of all types of dust, powder and granules in free fall and pneumatic conveying. Microwave sensor for on-line mass flow measurement of solids up to 20 t/h.