GRAMER GMBH, FLIESEN UND NATURSTEIN, NIEDERLASSUNG HALLE

It provides high strength. It is easy to use. Time and material savings provides. It is economical CONSUMPTION AMOUNT Product kg / m2 Brick (8.5x19x19) 5,05 Brick (13.5x19x19) 9,39 Pumice Brick (10x39x19) 3,27 Pumice Brick (15x39x18) 4,81 Pumice Brick (20x39x19) 5,32 Pumice Brick (25x39x18) 7,55

It is a mold plaster used in shaping ceramics and ceramics.

INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.

Surface preparation; Before starting the application, the surface should be cleaned of dust and anti-adhesive substances. The smoothness and mechanical health of the application surface should be checked. Application; The appropriate consistency of the mortar is 25 kg of joint filler in 5-7 liters of water. With a low-speed mixer, the joint filler is mixed into clean water for 3-5 minutes so that no lumps remain. The mortar, which is left to rest for 5 minutes, is mixed again for a short time and becomes ready for use.