KELLER PRESSURE - Your Swiss pressure sensing specialist

USB driver for manometers and remote transmission units with a USB connection.

Software for DOS, Windows 3.xx, 95, 98, NT and 2000 for configuring the Mano Record (MR01), calibrator and Mano Cali devices (no longer available) and reading off the recorded data.

Software for Windows 3.xx, 95, 98, NT, 2000 and XP for configuring the DC22, Mano Record (MR2), Series 53 and Series 55 devices (no longer available) and reading off the recorded data.

This software package for the GSM-1 remote transmission module (no longer available) contains the GSM-1 setup and modem logger software, as well as the operating instructions.

This pneumatic hand pump can generate negative pressure/vacuum and pressures of up to 25 bar. Thanks to the integrated fine adjustment valve, any calibration pressure can be configured precisely and rapidly, making the pump ideally suited to testing measuring equipment. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

This high-pressure pump generates pressures of up to 700 bar with ease, with fine control for precise adjustment. It is perfect for testing manometers and pressure transmitters. The pump must be filled with 100 cm3 of hydraulic oil or water and can therefore fill up even relatively large dead volumes. An additional manometer (not supplied) is needed for reference measurement of the configured pressure. KELLER recommends manometers in the LEX1 series with a suitable pressure range.

The K-114 interface converters enable communication between KELLER devices with an RS485 interface and a computer via USB.

The K-404-T interface converters enable direct communication between D-line products with an I2C interface and a computer via USB.

The K-102, K-102I, K-103-A and K-107-B interface converters enable communication between KELLER devices with an RS485 interface and a computer via RS232 (D-sub connector).

The LPX low-pressure calibrator is a high-precision calibration instrument for pressures between -0,85 bar and 10 bar (after taring to ambient pressure). The functional calibrator is supplied in a sturdy carrying case and pressure can be quickly generated manually. It is therefore ideal for use in the field. The pressure is measured by the integrated LEX1 manometer and output both on the display and via the RS485 interface. Additional functions such as zero point resetting, peak and trough pressure value indication and leak measurement make it even easier to take measurements.