Turkey
Manufacturer/ Producer
NATURAL EMERY GRAINS / CORUNDUM / ABRASIVE / AGGREGATESWe are the partners of the biggest EMERY GRAINS manufacturer of Turkey. We think you might be interested in our emery. Emery is a very hard, naturally formed mineral, comparable to Corundum. Due to the hardness and rough shape of the emery grains, it easily paste to vector material. Grounded to granulates, emery is very suitable to be used in anti-skid layers on bridge decks, parking decks and ship decks. It is also used as an additive in abrasion resistant pavements of roads, tunnels and entrances and exits of roads. Emery is weather proof and resistant to oils, fats and acids. Emery therefore is a relatively cheap and sustainable alternative compared to other - synthetic - materials such as silicon carbide, also known as carborundum (SIC). Emery is also used in grinding stones in the flagstone and marble industry, as a raw material for producing ABRASIVE materials like COATED ABRASIVES; BONDED ABRASIVES, CUTTING WHEELS, GRINDING WHEELS, MILLSTONES, GRIT BLASTING, RICE MILLING, ASPHALT AGGREGATES, ANTI-SKID MATERIAL, SURFACE HARDENER etc.Our main export markets are Holland, Canada, Israel, Denmark, France, Malta, Bulgaria, Romania, Hungary, India, Thailand and Pakistan.As you may already know 70% of NATURAL EMERY mine reserves in the world are in Turkey.You can also check www.naturalemerygrains.com for more information on emery. Here are typical specs for our emery: Hardness: 7.5 to 9 (hardest mineral
Turkey
It is used for conveying inclined or horizontally such products as; non-adhesive, powdery, causing less wearing, brittle, fine or medium size granular products
Request for a quoteTurkey
It provides high strength. It is easy to use. Time and material savings provides. It is economical CONSUMPTION AMOUNT Product kg / m2 Brick (8.5x19x19) 5,05 Brick (13.5x19x19) 9,39 Pumice Brick (10x39x19) 3,27 Pumice Brick (15x39x18) 4,81 Pumice Brick (20x39x19) 5,32 Pumice Brick (25x39x18) 7,55
Request for a quoteTurkey
INSTRUCTION MANUAL 1- First, water is poured into a clean container. 2- 10 kg to approximately 4.8- 5.0 kg of water PLASTER BASED SPECIAL PURPOSE JOINT FILLER is added. 3- Mix for 3 minutes with 60 seconds of sipping and 60 seconds of waiting. 4- The molds and materials to be used must be clean. 5- Before completing the setting time, the amount mixed in the container at room temperature should be used. 6- Completion of the application before the start of the first freeze should be provided. 7- The mortar mixture, with its flexible and easy application, It dries in minutes. 8- In the joints where gypsum-based special purpose joint filler is used There is no need to use joint tape.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.