The MEMS-based MTS1TEMP56 detects infrared radiation for non-contact temperature measurement. The 56 silicon thermopiles absorb the incoming radiated energy. The integrated mass absorber ensures the efficient conversion of the radiated energy into thermal energy. The thermocouples convert this thermal energy into electrical energy, which is output as a measurement signal. The single channel thermopile is the best choice for mass applications with quantities above 50000 pieces per year in medical and life science applications or in building automation. The TO46 package with small dimensions makes this component especially suitable for mobile devices. With a detectivity up to 0.67 *10^8 cm√Hz/W as well as a sensitivity up to 31 V/W, the materials offer reliable measurement results at a very good price/performance ratio. Nitrogen was used as backfill gas and a filter with a transmission cut on 5.5 µm. ATTENTION: 1 piece packaging unit contains 200 detectors each!
United Kingdom
Knight Optical has successfully launched a range of Stock Optical Domes for use in Pyronometers. Pyranometer/pyrgeometer are used for measuring solar irradiance. Typical applications being to understand where insulation needs to be within a building, climate studies and solar monitoring systems. A dome is essentially a window that has two parallel curves faces. Domes are used to shield the thermopile/ sensor used for making the measurements within a Pyranometer. Our domes are polished to high standards having good form error and high clarity with excellent transmission in the UV, NIR and FarIR spectrums allowing for accurate measurement. Capabilities: Domes are readily mountable, optically clear and manufactured to a high standard. Available from 5mm to 200mm in diameter and 0.25 to 10mm in thickness offering high transmission and extreme toughness for harsh environments. For more information read PDF
Request for a quoteGermany
Trotec presents T260 Infrared-Thermohygrometer. It has been designed and made as per the highest German quality standards. It has a high readability display. The DP mode provides simultaneous display of the dew point and surface temperature. Once the wall temperature is approaching or is lower than the dew point temperature, the user is warned by the T260 through an alarm tone and an optical laser signal. This alert function facilitates quick investigation of surface and detection of weak spots. The user can individually configure these alert states. Using a USB cable, T260 thermohygrometer can be connected to a PC. It provides MultiMeasure Studio Software, which is freely available in the downloads segment of uk.trotec.com. The software enables real-time transfer of T260's measured values both online and to the PC. Thus the values can be stored for analysis or reporting at a later stage. It has a continuous glass surface, which can be cleaned with ease.
Request for a quoteUkraine
Addressable heat detector with built-in short circuit isolatorDETECTO HT110 is an addressable heat detector designed to work as part of the Tiras PRIME A system. It can be configurated for "Fixed temperature" (A2 or B Classes) or "rate-of-rise" operation mode (A2R Class).
Request for a quoteGermany
ODE infrared detectors detect the infrared radiation of hot objects from 300° C to 2000 ° C. EGE ODE infrared detectors are designed for use under extreme conditions up to 350° C with optic fibre cables and attachment optics. The sensors provide a 4...20 mA output and have an additional freely adjustable switching threshold for the PNP switching output or relay output. The detectors are, for example, used to measure and monitor process temperatures in e.g. metal processing or glass manufacture.
Request for a quoteCreate one request and get multiple quotes form verified suppliers.