CN-8031 Modbus TCP Network Adapter supports the standard Modbus TCP Server Communication, and Ethernet supports the cascade function of dual-port switches.This adapter supports access to 5 Modbus TCP clients simultaneously, supports Modbus function code 01/02/03/04/05/06/15/16 /23, supports the Modbus application of watchdog, supports the process data maximum sum of input and output of 8192 bytes, and supports number of the extension IO module of 32. Module carries with the diagnostic function and it could monitor the communication status of IO module in real time.
China
AIOBOX-MT124F supports 16-channel DI, supports source and sink two-way Input, input voltage 24v/0v. AIOBOX-MT222F supports 16-channel DO, high-level voltage is valid, output voltage 24v. AIOBOX-MT623F supports 8-channel DI, supports source and sink two-way input, input voltage 24v/0v. AIOBOX-MT623F supports 8-channel DO, high-level voltage is valid, output voltage 24v. LED indicators for 16 channel input & output. Two or three-wire digital sensor can be connected through input channel. 32-bit counter is supported by every input channel (frequency: <200Hz). Thermal shutoff and overcurrent protection. The bus inside the module and the field input are isolated by optical coupler
Request for a quoteChina
Supports protocol conversion between Modbus-RTU and Modbus-TCP Supports the connection of5 TCP clients simultaneously ODOT-S2E2 supports 2*RS485 ODOT-S4E2 supports wiring of RS485/RS232/RS422 Each serial port supports Modbus masterand slave ODOT-S2E2:2 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway ODOT-S4E2:4 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway Supports one key reset Gateway working mode: Transparent transmission, address mapping
Request for a quoteChina
Supports protocol conversion between Modbus-RTU and Modbus-TCP Supports the connection of5 TCP clients simultaneously ODOT-S2E2 supports 2*RS485 ODOT-S4E2 supports wiring of RS485/RS232/RS422 Each serial port supports Modbus masterand slave ODOT-S2E2:2 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway ODOT-S4E2:4 serial Modbus-RTU/ASCII to Modbus-TCP Server gateway Supports one key reset Gateway working mode: Transparent transmission, address mapping
Request for a quoteChina
CANopen to Modbus TCP protocol converter MG-CANEX is a protocol converter from CANopen to Modbus TCP. The device plays as the master in the CANopen network and it could be connected to the standard CANopen slave devices. The data transmission supports PDO, SDO, and error control supports Heartbeat. It Supports synchronous and asynchronous message sending. As a TCP server in Modbus TCP network, the device could be accessed by 5 TCP clients at the same time, and it could be connected to PLC controller and various kinds of configuration software. It could also connect optical transceiver and to realize long-distance data transmission.
Request for a quote