Panzerhand Soft 1 (S1)
Description
A softer version of the Panzerhand model. The gloves are softer yet still highly resistant. They allow more sensitivity in the fingers. The model is suitable in jobs with a risk of injury with cutting edges or a knife while you have to work with smaller items (for example, on an assembly line). The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 48.5 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388. The gloves comply with the requirements of Regulation (EC ) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food. This is documented by a specific certificate. The gloves do not contain any glass fibres, which break to pieces during work and can remain in the food being handled!
- Fabric gloves
- gloves
Product characteristics
- Abrasion resistance
- Class 3 (max. 4)
- Cut resistance
- Class 5 (max. 5)
- Further tearing resistance
- Class 4 (max. 4)
- Puncture resistance
- Class 1 (max. 4)
Similar products from MIRO GLOVES
MIRO GLOVES
Czech Rep.
Protective fivefingers gloves, the outside layer is made of the Kevlar© (Aramid) fibre and the inner layer is the loop wave cotton insert. The gloves are designated as a protection against contact heat of 250°C. In the practice it means that any object of 250°C can be held by this mitten longer than 15 sec. In addition these mittens guarantee a high cut resistance. The comparison table of values according to EN 388
MIRO GLOVES
Czech Rep.
Coarse knitted fabric thick (4x Kevlar©) The gloves reach class 4 according to EN 388 of resistance against cuttingthrough by blade, which is the highest value. Kevlar (aramid) gloves are independent from the construction and at the same mass 67 x more cut ressistant than leather products. Gloves made of this fibre will withstand over a long time temperatures up to 250°C and over a short time term up to 700°C. They are high ressistant against tearing, burning and contact heat. Kevlar is registered mark of the firm DuPont. The comparison table of values according to EN 388
MIRO GLOVES
Czech Rep.
Gloves designed for foodstuff industry and for „Work with Food“. The gloves provide good protection against dirt, scratching or grazing. The gloves comply with the requirements of Regulation (EC ) No 1935/2004 of the European Parliament and of the Council on materials and articles intended to come into contact with food. This is documented by a specific certificate. The gloves provide good protection against dirt, scratching or grazing. Category 1, minimum risk, CE EN 420 Options Silvernite An antibacterial version of Foodhand gloves containing nanofibre enriched with silver ions. The silver has permanent antibacterial effects. According to EN ISO 20743, the gloves are classified as „Red Level“ i.e. the antibacterial effect resists 50 washing cycles. The treatment is efficient for food processing.
MIRO GLOVES
Czech Rep.
A protective, top quality cut resistant glove. The glove is a technical innovation of the model successfully manufactured since 1983, based on patent technology (invention) while applying modern materials and procedures as well. Due to the new technologies, the glove is more resistant and pleasant to wear. In order to increase the protection level, the hem is extended by 4 cm. The biggest area of applications is in jobs with a high risk of hand injury caused by a cutting edge, namely in the foodstuff industry e.g. chopping the glove is a cheaper and more comfortable alternative to looped gloves. It is useful in other industrial branches as well (for example, sheet metal manufacture etc.). The glove is resistant to contact heat of 100oC according to EN 407 (class 1). The glove is in conformity with EN ISO 13997 as for surface cut, achieving excellent results of 52.9 N (Newton). In comparison, 22 Newton corresponds to class 5 according to EN 388.