The gauges from the VSL Series measure the form, diameter, roundness and eccentricity of the rolls during the grinding process with very high precision. Form, radial run-out and eccentricity are measures with a precision of ± 1 µm. If an interface is available, they communicate online with the controller of the roll grinding machine and thus enable even more cost-effective use of the grinding machine. With the appropriate configuration, they measure the height and lateral alignment of the roll in the grinding machine before grinding, often enabling the set-up time to be significantly reduced. Vollmer produces the automatic roll measuring gauges for both bench-mounted machines where the roll is moved along the grinding wheel and for support machines where the grinding wheel is moved along the rotating roll. Vollmer supplies the systems for a broad spectrum of roll diameters.
United Kingdom
Within the thickness measurement instruments range is the Cygnus Mini ROV Mountable ut thickness gauge. This gauge is pressure tested to 500m and designed to be mounted onto small observation ROVs with or without a manipulator facility, allowing the operator to carry out thickness measurements in areas that have previously been unfeasible using large ROVs or divers. Supplied with CygLink software to display and log thickness measurements from the ROV metal thickness tester to a computer at the surface which can then be saved to a file and printed out. CygLink has two data logging facilities Quick Log for simple recording of thickness measurements and Structured mode with four templates available. The Cygnus Top Side Repeater (TSR) is available as an option and has the facility to display the thickness measurements remotely and overlay them on to a video signal. This allows the measurements to be superimposed on the ROV camera’s monitor screen.
Request for a quoteGermany
High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteGermany
Rent professional measuring equipment: Find our range of powerful measuring equipment for hire here, such as sound level meters, torque testing equipment, spring testing systems or precision balances.
Request for a quoteUnited Kingdom
Knight Optical can offer you Plane Mirrors (general, λ/1 and λ/4), for use within 3D Mapping Applications in a range of materials such as Soda-lime float glass, white float glass, and BK7 glass. Plane mirrors also known as front surface mirrors or first surface mirrors are used within 3D Mapping Applications. As stock we hold a number of general purpose, λ/1 and λ/4 with a range of up to 6 types of coatings such as Enhanced Aluminium, Ali/SiO2 and Ali/Mgf2. Our general purpose grade mirrors are made from good quality float glass and generally available in thicknesses of 1mm, 3mm and 6mm as standard. How our mirrors are used within 3D Mapping, is they are used as a sender and receiver of a laser beam that will take a reading of a specific surface, and from that reading it can create a 3D map of the surface that is has read. FOR MORE INFORMATION READ THE PDF..
Request for a quoteCreate one request and get multiple quotes form verified suppliers.