Rubin Seal

Arrow V2 is a tamper-evident seal produced of polypropylene. It is a tightening seal by the structure that features a catch, as well as a tail part, there is a locking mechanism between them, it is protected by a special cap. The seal catch helps to conveniently fasten the seal and provides a space for identifying information, such as a unique number and other details. The operating length of the seal is 215 mm (8.47”). Clixar products are additionally protected by laser marking with a unique eight-digit identification number on the catch, as well as on the seal's cap. This type of marking is made through the thickness of the seal surface, which prevents the chance to erase the number without a trace, apply a new one, or replace it without any visible evidence. In addition, Clixar offers customers the opportunity to apply their company logo, QR and bar codes, and other relevant information.

Black Prince is a tightening seal made of black polypropylene. It is classified as a tightening seal. The seal consists of a catch as well as a locking mechanism and a tail part. The locking mechanism contains a four-leaf spring steel collet, which provides reliable protection against tampering. The seal has an extended working length of 385 mm (15.16") for easy use on large and bulky objects. The lock provides reliable protection with a four-leaf collet made of spring stainless steel, where the leaves are slightly lifted upwards. When there is an attempt to pull the seal tail backward, out of the lock, the collet leaves drop down and cut the tail part off, thus rendering the product unusable. It means that you will always have visible evidence on the seal if there has been an attempt of external interference.

The twist seal Turbion is a seal made of polycarbonate. It has two pre-installed parts: a case and a rotor. The transparent (sometimes semi-transparent) case reliably protects the internal locking mechanism and helps to monitor its integrity. The internal rotor consists of 4 leaves that allow to rotate it only clockwise. This means that it is impossible to open or remove the seal without destroying the rotor, which warns the intruders of unavoidable and obvious signs of external interference. As an added security, the case catch and rotor are marked with the same unique number. This eliminates the possibility to replace the seal or some of its parts with another. Also, your logo, QR and bar codes, and other information can be laser marked on the case catch. All markings are lasered through the thickness of the surface making it impossible to erase them and apply another marking without visible damage.

The Lumiseal twist seal is made of polycarbonate and consists of two pre-installed parts: the case and the rotor with catches featuring the unique number. It is applied by laser, which virtually eliminates the threat of counterfeiting or replacing the seal number. The rotor of the seal can only be rotated clockwise, so you can be sure that once the seal is installed, no one can open it without leaving visible signs of tampering. An additional degree of protection is marking applied by laser through the thickness of the seal surface. Thus, it cannot be erased, removed, or counterfeited. The unique number is applied on the case and the inner rotor, so no one can replace any part of the seal. Additionally, your company logo, QR, and bar codes can be marked on the case catch.