SICHUAN ODOT AUTOMATION - Leading automation data acquisition solutions provider

CN-8011 Modbus-RTU Network Adapter Module Overview CN-8011 Modbus-RTU network adapter supports standard Modbus-RTU communication, it supports function code of 01/02/03/04/05/06/15/16/23, and this device could monitor the IO module communication state in real time.

The CN-8033 EtherCAT I/O module supports standard EtherCAT protocol access. The adapter supports a Max. input of 1024 bytes and a Max. output of 1024 bytes. It supports 32 pcs of extended IO modules. Hardware Specification System Power： Nominal 24Vdc, Range-9-36Vdc Protection: Overcurrent Protection, Reverse Protection: YES Power Consumption：110mA@24Vdc Internal BUS Supply Current：Max.2A@5VDC Isolation：System Power to Field Power Isolation Field Power Supply Power Supply：22~28V（Nominal 24VDC） Field Power Supply Current：Max. DC 8A I/O Modules supported：32 pcs Wiring：Max.1.5mm²(AWG 16) Mounting Type：35mm Size DIN-Rail Size：115*51.5*75mm Weight：130g Environment Specification Operational Temperature：-40~85℃ Operational Humidity：5%~95% RH(Condensation) Protection Level：IP20 EtherCAT：Parameter Protocol：EtherCAT Process data area：Input Max.1024 Bytes, Output Max.1024 Bytes Network Interface：2 RJ45 Speed：10/100Mbps, MDI/MIDX, Full-Duplex Max.Bus Legenth：100m

CN-8012 Profibus-DP Network Adapter Module Overview CN-8012 PROFIBUS-DP network adapter supports access of standard PROFIBUS-DP, and the protocol version it supports is DPV0.

CANopen is an open and flexible high-level protocol with more and more applications. Based on the CAN bus, it combines low cost and high performance, and provides an attractive distributed control solution for industrial automation, medical devices, public transportation, elevators, maritime electronics, and other applications. CN-8021 details: It could support max 128 PDO, 64 TPDO, and 64 RPDO. CANopen Node ID supports the value ranges from 1 ~ 99. CANopen conforms to DS301 and DS401 standards. The bus communication baud rate is from 10Kbps ~ 1Mbps. It supports NMT, PDO, SDO, Heartbeat and SYNC. It could use physical switches to control terminal resistance access, baud rate, slave address and other parameters. WTP: -40~85℃

CN-8013 CC-Link Network Adapter Module Overview CN-8013 CC-Link network adapter supports standard CC-Link Ver.2 communication and it could monitor the communication status of IO modules in real time.

CANopen is an open and flexible high-level protocol with more and more applications. Based on the CAN bus, it combines low cost and high performance, and provides an attractive distributed control solution for industrial automation, medical devices, public transportation, elevators, maritime electronics, and other applications. CN-8021 details: It could support max 128 PDO, 64 TPDO, and 64 RPDO. CANopen Node ID supports the value ranges from 1 ~ 99. CANopen conforms to DS301 and DS401 standards. The bus communication baud rate is from 10Kbps ~ 1Mbps. It supports NMT, PDO, SDO, Heartbeat and SYNC. It could use physical switches to control terminal resistance access, baud rate, slave address and other parameters. WTP: -40~85℃

The module supports 4-channel thermocouple signal acquisition The module carries with 4 analog indicators The module supports 9 kinds of conventional thermocouple temperature measurement type The internal bus of the module and field input adopts magnetic isolation The module input channel supports TVS overvoltage protection 24-bit ADC resolution (Σ-δ type)

CT-121F：16 channel digital input/24VDC/ Sink type/The input high level is valid Module features the module supports 16 channels digital input, supports sink input, and input voltage is 24VDC. the module can collect digital output signal of field equipment (dry contact or active output). the module can be accessed to 2-wire or 3-wire digital sensor. the internal bus and field input of the module use opto-isolator. the module supports the input signal holding function, and the holding time can be set. the module carries 16 digigtal input channels with LED indicator on each channel. supports counting function, by adding counting sub-module. each input channel of the module supports a 32-bit counter with the counting frequency <200Hz. the module can set the digital signal input filtering time and the byte transmission order of the counter. each channel of the module can set the counting mode and counting direction independently.

CT-222F 16 channel digital output/24VDC/source type/output 24VDC, the output high level is valid Module features the module supports 16 channels digital output, the output high level is valid, the output voltage is 24VDC. module can drive field equipment. (relay, solenoid valve, etc.) the internal bus of the module and field output are using opto-coupler. the module has 16 digital output channel LED indicator light. the module has the functions of thermal shutdown and overcurrent protection. the module supports short circuit protection and overload protection.

CT-122F 16 channels digital input/0VDC/Source type/Input 0V, the input low level is valid Module features the Module supports 16 channels digital input, supports source input, the input voltage is 0V and the input low level is valid. the module could collect the digital output signal of field equipment (dry contact or active output). the module can be connected to a 2-wire or 3-wire digital sensor. the internal bus of the module and field input are isolated by optocoupler. the module supports input signal holding function, holding time can be set. the module carries with 16 digital input channel LED indicator. after adding counting submodule, the counting function is effective. each input channel of the module supports 32-bit counter with counting frequency <200Hz. the module could set the digital signal input filter time and counter byte transmission sequence.