Secuflex Protective Sleeve [sfx]

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.