TLV70433DBVT Texas Instruments

Linear Voltage Regulators

The Microchip Linear Voltage Regulators MCP1812AT-033/OT are designed to provide a reliable and efficient power supply solution for a variety of applications. This device is a 0.6V @ 300mA over current positive SC-74A SOT-753 voltage regulator. It features a low dropout voltage, low quiescent current, and high power supply rejection ratio. The device also has a wide input voltage range of 2.7V to 6.5V and a wide output voltage range of 0.6V to 5.5V. It is also capable of providing up to 300mA of output current. The device is also designed to be highly efficient, with a typical efficiency of up to 95%. The device is also designed to be highly reliable, with a maximum junction temperature of 150°C. The device is also RoHS compliant and is available in a variety of packages. The Microchip Linear Voltage Regulators MCP1812AT-033/OT are an ideal solution for providing a reliable and efficient power supply solution for a variety of applications.

1.5 A, Adjustable Output, Negative Voltage Regulator The LM337 is an adjustable 3−terminal negative voltage regulator capable of supplying in excess of 1.5 A over an output voltage range of −1.2 V to − 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow−out proof. The LM337 serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM337 can be used as a precision current regulator. Features •Output Current in Excess of 1.5 A •Output Adjustable between −1.2 V and −37 V •Internal Thermal Overload Protection •Internal Short Circuit Current Limiting Constant with Temperature •Output Transistor Safe−Area Compensation

The TPS 534 thermopile sensor in TO 5 type housing employs a chip of 1.2 x 1.2 mm2 absorber size and a 30 kV thermistor as temperature reference. The round window opening is equipped with a 5.5 µm longpass (standard) infrared filter. The sensor shows a flat sensitivity characteristics over the wavelength.