Thermal spraying processes (as classified in the EN 657 and ISO 14917 standards) offer a wide range of applications within modern surface technologies. Components made from a wide range of base materials can be coated with layers of high-melting-point metals or ceramics to protect them against wear and corrosion. Furthermore, thermally conductive or heat-insulating layers can be applied to highly thermally stressed components. Almost all coating materials that can be produced in powder or wire form can be processed in this way. During thermal spraying, the coating materials are fed into — and melted by — an energetic heat source (fuel gas oxygen flames from combustible gas, arcs or plasmas of noble gases such as argon, hydrogen, nitrogen, helium). The particles, which are either softened or fully molten, are accelerated in the direction of the workpiece and collide with it at high speed (40–600 m/s).
Germany
Optigrun Protection and Storage Fleece RMS 300 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)
Request for a quoteTurkey
Soundproof Cork Underlayment for flooring is something that most people don't think about on a daily basis unless you are in an occupation which deals with flooring. Create high performance sound control with Rubber Cork underlayment. Corck Rubber products provide superior impact noise and foot step sound reduction. Better sound reduction than many foam products and superior compression recovery performance. The high performance recycled Rubber Cork sound control underlayment may also be used with ceramic and natural stone flooring. Usage areas Sound Insulation Cork Rubber is used for controlling noise in condominiums, apartments, multifamily dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints. Sound insulation cork rubbers should use in; Classrooms
Request for a quoteGermany
The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance
Request for a quoteChina
PEEK material performance Polyetheretherketone (PEEK) is a high-performance, engineering thermoplastic characterized by an unusual combination of properties. These properties range from high temperature performance to mechanical strength and excellent chemical resistance. Material Grade ARKPEEK-1000: 100%PEEK ARKPEEK-CF30: 30% Carbon Fiber + 70% PEEK ARKPEEK-GF30: 30% glass fiber + 70% PEEK ARKPEEK-MOD: 10% Carbon Fiber + 10% PTFE +10% Graphite
Request for a quoteCreate one request and get multiple quotes form verified suppliers.