Turbo Spiral Doors
home2
Description
Spiral Doors are door systems in which Extrusion, Sandwich Panel or metal framed canvas partitions are collected in a specially designed spiral snail slot without contacting each other and move up and down in a channel at a speed of 2,5 m/s. It is used to ensure safe and fast traffic flow inside or outside the facility . In this way, it provides savings by reducing time and energy loss in enterprises. Paw Turbo Spiral Doors, which give a monolithic appearance with aluminum extrusion or polyurethane filled sandwich panels and aluminum struts, are not only used for industrial facilities, but also as garage doors for prestige buildings with very heavy vehicle traffic with their aesthetic and modern appearance . Turbo Spiral Automatic Doors, which allow the door to operate in harsh weather conditions with its partitioned structure and strong upright system
- Doors, industrial
- Doors Exit
- Spiral Doors
Similar products from PAW INDUSTRIAL DOOR SYSTEMS
PAW INDUSTRIAL DOOR SYSTEMS
Turkey
Emergency exit doors are designed and offered to you for the fastest passage in case of any malfunction, power cut or emergency. In these cases, thanks to its special design, it can be easily exited thanks to the pressure on the middle part of the door. Then the door is returned to its original position and continues to operate in the same performance.
PAW INDUSTRIAL DOOR SYSTEMS
Turkey
have been tested in accordance with BS476. The fire rating was rated by BRE at the Technical Center (Test Report No TE85423) at 4 hours ½ hour to a maximum size of 4000mm wide and 4000mm high. The special door, which is wrapped in a spiral, closes automatically in cases where the room temperature exceeds 65` at the time of fire, making the fire area isolated.
PAW INDUSTRIAL DOOR SYSTEMS
Turkey
Sectional Doors are designed for multi-purpose ceiling opening for industrial buildings. It is made of steel material. It is an ideal system with motor and manual use for all industrial structures such as factories and warehouses. Panels of 615 or 495 mm form the door. They are connected to each other with panel colored electrostatic painted steel, aluminum or stainless steel hinges. Panels with a thickness of 42 mm and a thermal coefficient of 0.78 W/m2K are composed of two steel, aluminum or stainless steel plates filled with polyurethane foam with a density of 40 kg/m3. Sectional doors There are strong steel plates inside the panel that increase the wind resistance. Thanks to EPDM gaskets, high insulation is provided on the sides, bottom and top, against rain and wind. The doors, which are balanced with the spring system, can be easily opened and closed manually without the need for a motor. The doors have a security system against spring breakage and rope throwing.