WERNER FRANTES GESMBH

Vertical sealing machines for hanging garments, suitable for packaging ironed garments such as jackets, shirts and suits. They can seal all types of bags between 400 and 700 mm in width and of any thickness. The machines carry out an impulse welding (the resistances heat up only during the welding). Welding times vary from a minimum of 0.6 sec. to a maximum of 1.2 sec. The sealing machines for hanging garments are available in the following versions: FPMM MANUAL MODEL The FPMM manual model only performs the upper sealing of the bags containing the garments. The bars are closed by manual command from the operator who acts on a lever located on the control panel. The bottom of the envelope remains open. FPMA/FPMA PLUS PNEUMATIC MODEL The FPMA model is more professional and robust and has a minicomputer that manages the functionality of the machine, from the safety devices to the working times. Thanks to it, it is possible to work in three different operating mode.

Impulse heat sealer for closing and coding plastic tubes of variable height, from 105 mm to 220 mm, with diameter up to 50 mm (60 mm with optional). Simple and compact with electromagnetic operation and innovative temperature control that constantly monitors, cycle after cycle, the real sealing temperature. CE certified. The TUBO3 heat sealer for tubes can seal tubes starting from 20 mm in diameter and 105 mm high. On request it is possible to make a special tube holder for tubes with a diameter of 20 mm and a height of 70 mm. However, it is not possible to seal tubes with a diameter of less than 20 mm and a height of less than 70 mm.

RK tube connector – unbeatable variety Thanks to their simple clamping principle, the aluminium tube connectors enable the fast assembly of both round and square precision tubes. The huge diversity of this system is what makes it an attractive and cost-effective alternative to conventional welded connections. Our application expertise and the experience we have gained over several decades as a manufacturer of clamp connectors give you security for individual handling of RK tube connection systems. Connecting tubes with different diameters and cross sections to one another The cast aluminium or extruded aluminium tube connectors impress with good mechanical properties, a wide range of variants and optimum value for money. The Solid Clamps product range currently comprises clamp connectors with a diameter of 8-80 mm for round tubes and of 20-80 mm for square tubes. More than 170 basic types in over 400 different variations are available.

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged.