Results for

Springs - Germany

361 Companies

565 Products

Product recommendations

Germany

Germany

Germany

Turkey

See more products

PIERON GMBH

Germany

Since 1925, PIERON – a family-owned company now in the hands of its fourth generation – has manufactured technical springs for almost all industry sectors. We focus on the automotive as well as on the electrical and sports equipment industries. At our Bocholt site, over 270 employees implement new solutions in the product areas of annular, compression and torsion springs as well as stamped, bent and wire bent parts on an operating area of approx. 20, 000 m². Special parts and assemblies complete our product range. State-of-the-art manufacturing processes guarantee production that meets the highest requirements.

All the products for "springs"

Rings and Lamellar Rings

Torsion Springs

Wave Springs

Coil-Contact Springs

Compression Springs

Website See all products
P.J. PRAUSE DUROTEC GMBH

Germany

In 1974, Paul Joachim Prause founded the company Schichtstofftechnik Prause, which was renamed the P. J. Prause Durotec GmbH in 1998. P. J. Prause had previously, as part of 3M Germany, significantly contributed to shaping the technical application of synthetic leaf springs in Germany with Scotchply™ glass-fibre composites. This enabled Prause Durotec GmbH to acquire more than 35 years of experience in the manufacture and application of leaf springs made from fibre composites. Prause Durotec is a medium-sized company with 16 members of staff and a global customer base. The range of products we manufacture includes all configurations of flat leaf springs with E-glass, S-glass, carbon fibres, with epoxy resin providing the matrix. The procedures used to process the UD prepregs (UD = unidirectional) comply with aeronautical and military standards.

All the products for "springs"

Spring shapes

Website See all products
FWH FEDERNFABRIK WILHELM HESSE GMBH

Germany

The company Wilhelm Hesse is a spring manufacturer in south-eastern Saxony, Germany, close to the border with Poland and the Czech Republic. We can look back proudly on a tradition that stretches back over 130 years. The entrepreneur Friedrich Wilhelm Hesse founded the company in 1887. After forced nationalisation in 1972, the private company was re-privatised on 1st July 1990 by the founder's great-grandson, Mr Werner Siche (died 16th April 2013). In 2006, he was able to commission the new production facility in Ebersbach-Neugersdorf. Prior to 1990, we were already an important supplier for switching electronics, automotive engineering, the automotive industry, textile mechanical engineering, rail vehicle construction, armature and valve construction and many other industry sectors. Since 1990, we have been constantly modernising and expanding our production facilities. We have experienced and specialist staff, as well as special software, to help us to advise customers and to develop, calculate and produce springs. Our efficient quality assurance system guarantees that our products are of a consistently high quality. This system was established on the basis of DIN ISO 9002 and introduced in 1994. Recertification according to DIN EN ISO 9001: 2015 was successfully completed in 2016. Our active membership of the Verband der Deutschen Federnindustrie (Association of the German Spring Industry) enables us to have all of the important and current information concerning spring manufacturing and development.

All the products for "springs"

torsion springs

compression springs

tension springs

Website See all products
LESJÖFORS INDUSTRIAL SPRINGS & PRESSINGS GMBH

Germany

Die Lesjöfors Group is one of the largest manufacturers of technical springs in the world. Our range of products in spring technology includes wire and leaf springs, punched and bent parts, and gas springs. Our experience in spring manufacturing dates back to 1852. Today, over 1800 motivated employees ensure that everything from technical design and spring calculation through to dispatch runs smoothly and professionally. Thanks to our many years of experience in springs, stamping technology and bending technology, we provide our customers with customised solutions which can be implemented in a timely manner due to our flexible production capacity. We are active on the international stage with regard to continuing globalisation. Currently, we have production and sales sites in Sweden, Finland, Norway, Denmark, Germany, the Netherlands, Great Britain, Slovakia, Latvia, Russia, China, Thailand, Singapore, Mexico and the USA .

All the products for "springs"

Compression Springs

Quality on demand

Flat Springs

Lockable Gas spring

Dynamic Gas spring

Website See all products
ZIMMERMANN TECHNISCHE FEDERN GMBH

Germany

ZIMMERMANN Technische Federn is an expert development and series supplier of springs and assemblies for complex applications. ZIMMERMANN Technische Federn GmbH has its registered office in Leutersdorf, where the borders of three countries meet. The Zimmermanns have over 100 years' experience in developing and manufacturing complex spring systems. Over the years, a strong relationship of trust has been built up between customers, employees and the management. The product range spans from compression, draw and torsion springs to bent wire parts, bent strip parts, complex plate and spiral springs through to diverse assemblies. Nothing's impossible! ZIMMERMANN Technische Federn GmbH has very high expectations of itself and of the quality of its spring systems. Thanks to the excellent training of employees, ZIMMERMANN has developed extensive expertise in its specialist area.

Website

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SCHNORR GMBH

Germany

We manufacture disc springs, safety washers and load washers, wave springs and stamped parts made of spring steel. SCHNORR® products are the top choice for any application whereby metal – thanks to its strength and shape – can fulfil demanding the functions of "move, cushion and secure". As a pioneer in disc spring applications, Adolf Schnorr founded the owner-managed family company in 1908. SCHNORR® has grown into an international leading troubleshooter in the area of disc springs and screw and bolt locking devices with sales branches all over the world. In addition to many years of experience in stamping and turning, the company also has the technology to perform precision blanking operations, the expertise to manufacture distortion-sensitive disc springs, as well as a further product group – made-to-order wave springs.

Website
IVG SYSTEMTECHNIK GMBH

Germany

We utilise our specialist knowledge and many years of experience to find tailored solutions for our customers. We take the time to thoroughly advise and regularly exchange information with our customers. In this way, we guarantee high quality from the very start when we create new product solutions. Our international network makes us flexible and fast in our approach to our customers' requirements. Our customers include hundreds of industrial companies in Germany and Europe in mechanical and equipment engineering, the automotive sector, aerospace engineering and medical technology. We produce application solutions from small-scale and sample series to bulk production. Our standards and sense of quality will follow you from the project planning process all the way to the finished project.

Website
RÖHRS, DR. WERNER

Germany

Known worldwide as a specialist in highly stressed technical springs since 1919. The product range contains springs of every type and form. Its manufacturing program includes, in particular, compression springs made of round and flat wire, disc springs, helical disc springs, multi-wire springs and many other springs. Products: Leaf, flat and shaped springs, damping springs, compression springs, flat wire springs, multi-wire springs, levelling feet, helical springs, disc springs, torsion springs, vortexers and more.

Website
HIP HOMANN IMPORT & PRODUKTIONS GMBH & CO. KG

Germany

We have many years of experience and guarantee that our products will provide secure support for all your applications. We operate as a global system supplier for industrial companies from our sites in Altenberge (Germany) and Kaohsiung (Taiwan). Secure and solid! Our high-quality fasteners enable us to fix various materials and components securely. So that you can benefit from your affiliation with us, we will additionally facilitate your work thanks to individual services for screws, nuts and more. Flexible service! Whether from our headquarters in the North Rhine-Westphalian district of Altenberge, Germany, or from our agency in Kaohsiung, Taiwan, we supply our products to industrial companies from a range of sectors.

Website
DIETZ GMBH

Germany

Spring manufacture requires a very high degree of precision in order to meet all the requirements of complex structures while remaining functional. Due to rising demands on quality, we are continuously further developing our materials and products. Their functionality is safeguarded by frequent quality tests. Of course we are happy to provide you with the test results. In manufacturing springs and bent wire parts, we guarantee that our products keep the promises they make. Our objective is to have maximum supply security and for our customers to have the lowest possible level of processing expenses. We pursue this with our database-supported inventory system – in the raw materials warehouse as well as the warehouse for completed components. Thanks to our streamlined structures and processes, we are able to react to your logistical requirements in an especially flexible way.

All the products for "springs"

Wave springs

Bent wire parts

Torsion springs

Compression springs

Extension springs

Website See all products

LÖHR GMBH & CO PRÄZISIONSFEDERN KG

Germany

We are a medium-sized manufacturer of technical springs based in Schwabach near Nürnberg. Employing a staff of 50 employees, we are a traditional and highly-competent manufacturer of technical springs and bending parts made from steel, stainless steel and non-ferrous metals for use in resolving special problems and mass production. At Löhr GmbH & Co. Präzisionsfedern KG, know-how drives innovation. Know-how is a combination of past experience and anticipation of the latest developments. Innovative solutions need both. Take advantage of our experience, knowledge, quality and delivery reliability.

Website
MONNINGER FEDERN GMBH

Germany

Monninger has been the expert company for stainless steel and steel springs for more than 75 years. Experience, customer relations and quality awareness have always formed the basis for our success. We were certified in accordance with ISO 9001 for the first time 1994. With our ISO/TS 16949 certification in 2012, we entered a new era which continues to influence everything we do. The solid company has long since become a brand which has made a name for itself both among customers and expert groups. The company's good reputation is based on solid constant factors which have been in place from its foundation in 1945 to today: Precision. Dynamism. Engineering spirit. Enabling dynamics. It is time to more intensively devote ourselves to these key skills, to strategically orient the company towards the future and to position the business in a manner that is externally visible. In close collaboration with brand consultants solldesign, Monninger has prepared a brand relaunch which creates an identity and sends clear signals.

Website

Product recommendations

Poland

Turkey

Germany

Greece

See more products

ACE STOSSDÄMPFER GMBH

Germany

We damp everything except for your expectations. ACE is a globally recognised specialist in the area of industrial damping technology – represented in 45 countries on all continents. ACE has been a highly successful player on the German market since 1978. In this country alone, 25 engineers work day-in-day-out on advancing the product range. ACE customers benefit from sophisticated solutions, valuable innovations and exemplary service in relation to damping technology. Through its close collaboration with leading mechanical engineering companies, the German ACE branch has recently established itself as the pioneer in state-of-the-art technology. The advantages for customers are obvious: Expert technical advice on site and on the phone, customer-specific design, delivery without any minimum quantities from one unit upwards in the shortest possible time, sophisticated installation and functional accessories, realistic prices

All the products for "springs"

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Industrial Gas Springs – Pull Type

Website See all products
WESTFÄLISCHE DRAHTINDUSTRIE GMBH

Germany

Westfälische Drahtindustrie GmbH, based in Hamm, is the largest independent wire producer in Europe. The company has been manufacturing high-quality wire and finished products for a wide range of applications at 15 locations in Europe since 1856. Led by Managing Director Katja Pampus since 2009, Westfälische Drahtindustrie GmbH has established itself as a leading company in the wire industry. Founded in 1856 as "Hobrecker, Witte & Herbers", Westfälische Drahtindustrie GmbH has undergone impressive development and is now the largest independent wire producer in Europe. Westfälische Drahtindustrie focuses on ensuring quality and customer satisfaction. With a certified quality management system which complies with ISO 9001, the company ensures the optimum quality of its products. Our corporate philosophy is built on continuous improvement and ensuring quality targets are monitored. Our business areas Quality wire: Steel wire Machining steel wire Bright steel Cold forming wire Iron wire Aluminium wire Structural steel: Cold-formed, ribbed reinforcing steel (KR) Reinforcement mesh Welding consumables: Unalloyed and low-alloyed inert gas and submerged arc wire electrodes Overhead power lines Aluminium-steel wire ropes Aluminium wire ropes High-temperature wire ropes Steel strands for underground lines Westfälische Drahtindustrie GmbH remains a major player in various industry sectors and contributes to technological development worldwide.

All the products for "springs"

Steel Wire For Technical Springs

Spring Steel Wire

Website See all products
GUTEKUNST FEDERN

Germany

Gutekunst Federn specializes in the development and manufacture of Compression springs, Tension springs, Leg springs as well as bent wire parts from any desired Spring steel wire specialized. In addition to the extensive Stock program with 12 603 spring sizes , manufactures Gutekunst Federn any desired individual metal spring up to 12 mm wire thickness in small quantities and large series. With 320 employees, the family company, founded in 1964, supplies around 100, 000 customers from all industries worldwide. Certified according to ISO 9001 and 14001 Gutekunst Federn today counts five Branches in Germany and France one of the most famous spring manufacturers in Europe. on www.federnshop.com Gutekunst Federn offers everything you need for springs. With the extensive Spring catalog , the individual Spring calculation WinFSB , to the CAD data generator and numerous Information about metal springs no question remains unanswered. Gutekunst also offers feathers federn-forum.de and blog.federnshop.com Information platforms around the topic of “metal springs“.

All the products for "springs"

Torsion springs

T-16000L Torsion Spring

RZ-001I Extension Spring

D-001 Compression Spring

Compression Springs

Website See all products
WOLFF & STÜBECKE DRAHT- UND METALLWAREN E.K. INH. CHRISTIAN CASARINI

Germany

The company WOLFF & STÜBECKE DRAHT- UND METALLWAREN E.K. INH. CHRISTIAN CASARINI, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Iserlohn, Germany.
ALCOMEX FEDERN GMBH

Germany

The company ALCOMEX FEDERN GMBH, is a Wholesaler, which operates in the Springs industry. It is based in Goch, Germany.
GERMANIA-WERK SCHUBERT GMBH & CO. KG

Germany

The company GERMANIA-WERK SCHUBERT GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Berlin, Germany.
FBTEC KNOCHE & MORK GMBH

Germany

The company FBTEC KNOCHE & MORK GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Hagen, Germany.
PRÄZISIONSTECHNIK GMBH FEDERMECHANIK & ELEKTROTECHNIK

Germany

The company PRÄZISIONSTECHNIK GMBH FEDERMECHANIK & ELEKTROTECHNIK, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Halle, Germany.

RUDOLF KÜHNEMUND DRAHT- UND METALLWARENFABRIK GMBH

Germany

The company RUDOLF KÜHNEMUND DRAHT- UND METALLWARENFABRIK GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Hamm, Germany.
GEBRÜDER HAHN GMBH

Germany

The company GEBRÜDER HAHN GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Schalksmühle, Germany.
JACKNAU GMBH

Germany

The company JACKNAU GMBH, is a Wholesaler, which operates in the Springs industry. It is based in Berlin, Germany.
KARL RUGGABER GMBH & CO KG

Germany

The company KARL RUGGABER GMBH & CO KG, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Gerlingen, Germany.
JUNG GMBH & CO. KG

Germany

The company JUNG GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Halver-Carthausen, Germany.
WALTRAUD GRAUKE GMBH

Germany

The company WALTRAUD GRAUKE GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Hagen, Germany.
STUMPP + SCHÜLE GMBH

Germany

The company STUMPP + SCHÜLE GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Beuren, Germany.
VOSS FEDERN GMBH & CO. KG

Germany

The company VOSS FEDERN GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Witten, Germany.
BAHNER & SCHÄFER GMBH

Germany

The company BAHNER & SCHÄFER GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Oelsnitz, Germany.
LUPA PRÄZISIONSFEDERN GMBH

Germany

The company LUPA PRÄZISIONSFEDERN GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Hardt, Germany.