Results for

Springs

14 Companies

550 Products

Product recommendations

Germany

Germany

Turkey

See more products

FWH FEDERNFABRIK WILHELM HESSE GMBH

Germany

The company Wilhelm Hesse is a spring manufacturer in south-eastern Saxony, Germany, close to the border with Poland and the Czech Republic. We can look back proudly on a tradition that stretches back over 130 years. The entrepreneur Friedrich Wilhelm Hesse founded the company in 1887. After forced nationalisation in 1972, the private company was re-privatised on 1st July 1990 by the founder's great-grandson, Mr Werner Siche (died 16th April 2013). In 2006, he was able to commission the new production facility in Ebersbach-Neugersdorf. Prior to 1990, we were already an important supplier for switching electronics, automotive engineering, the automotive industry, textile mechanical engineering, rail vehicle construction, armature and valve construction and many other industry sectors. Since 1990, we have been constantly modernising and expanding our production facilities. We have experienced and specialist staff, as well as special software, to help us to advise customers and to develop, calculate and produce springs. Our efficient quality assurance system guarantees that our products are of a consistently high quality. This system was established on the basis of DIN ISO 9002 and introduced in 1994. Recertification according to DIN EN ISO 9001: 2015 was successfully completed in 2016. Our active membership of the Verband der Deutschen Federnindustrie (Association of the German Spring Industry) enables us to have all of the important and current information concerning spring manufacturing and development.

All the products for "springs"

tension springs

torsion springs

compression springs

Website See all products
ZIMMERMANN TECHNISCHE FEDERN GMBH

Germany

ZIMMERMANN Technische Federn is an expert development and series supplier of springs and assemblies for complex applications. ZIMMERMANN Technische Federn GmbH has its registered office in Leutersdorf, where the borders of three countries meet. The Zimmermanns have over 100 years' experience in developing and manufacturing complex spring systems. Over the years, a strong relationship of trust has been built up between customers, employees and the management. The product range spans from compression, draw and torsion springs to bent wire parts, bent strip parts, complex plate and spiral springs through to diverse assemblies. Nothing's impossible! ZIMMERMANN Technische Federn GmbH has very high expectations of itself and of the quality of its spring systems. Thanks to the excellent training of employees, ZIMMERMANN has developed extensive expertise in its specialist area.

Website
BAHNER & SCHÄFER GMBH

Germany

The company BAHNER & SCHÄFER GMBH, is a Manufacturer/ Producer, which operates in the Springs industry. It is based in Oelsnitz, Germany.
ENGELHARDT FEDERNFABRIK GMBH

Germany

The company ENGELHARDT FEDERNFABRIK GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It also operates in the Metal construction, lightweight, Springs, Spiral springs, Leaf springs, Metal construction, lightweight, Springs, Spiral springs, and Leaf springs industries. It is based in Chemnitz, Germany.
SCHIRMUNG 2000

Germany

The company SCHIRMUNG 2000, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It also operates in the Springs, Filtering equipment and supplies, Seals, Electromagnetic compatibility measuring equipment, Springs, Filtering equipment and supplies, Seals, and Electromagnetic compatibility measuring equipment industries. It is based in Freiberg, Germany.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

BETEC BEFESTIGUNGSTECHNIK GMBH

Germany

The company BETEC BEFESTIGUNGSTECHNIK GMBH, is a Wholesaler, which operates in the Ores, ferrous and non-ferrous industry. It also operates in the Hand tools, non-power, Springs, Fastening devices, Nuts and bolts, Hand tools, non-power, Springs, Fastening devices, and Nuts and bolts industries. It is based in Chemnitz, Germany.
GUTEKUNST & CO

Germany

The company GUTEKUNST & CO, is a Manufacturer/ Producer, which operates in the Wires and cables - ferrous metal industry. It also operates in the Metal construction, lightweight, Springs, Spiral springs, Leaf springs, Metal construction, lightweight, Springs, Spiral springs, and Leaf springs industries. It is based in Cunewalde, Germany.
SCHÖNHOFF DRAHTVERARBEITUNG

Germany

The company SCHÖNHOFF DRAHTVERARBEITUNG, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It also operates in the Wires and cables - ferrous metal, Wires and cables - non-ferrous metal, Metal construction, lightweight, Springs, Wires and cables - ferrous metal, Wires and cables - non-ferrous metal, Metal construction, lightweight, and Springs industries. It is based in Dennheritz, Germany.
NESTLER GMBH DRAHTERZEUGNISSE

Germany

The company NESTLER GMBH DRAHTERZEUGNISSE, is a Manufacturer/ Producer, which operates in the Wires and cables - ferrous metal industry. It also operates in the Wires and cables - non-ferrous metal, Springs, Fastening devices, Nuts and bolts, Wires and cables - non-ferrous metal, Springs, Fastening devices, and Nuts and bolts industries. It is based in Ehrenfriedersdorf, Germany.
FEDERN SCHULZE

Germany

The company FEDERN SCHULZE, is a Distributor, which operates in the Springs industry. It also operates in the Agriculture and forestry - machinery and equipment, Cars, Lorries, vans and commercial vehicles, Vehicles, used, Agriculture and forestry - machinery and equipment, Cars, Lorries, vans and commercial vehicles, and Vehicles, used industries. It is based in Markersdorf, Germany.

KAUFPORTAL-24

Germany

The company KAUFPORTAL-24, is a Manufacturer/ Producer, which operates in the Steels and metals - forming and cutting industry. It also operates in the Wires and cables, steel, Springs, Spiral springs, Leaf springs, Wires and cables, steel, Springs, Spiral springs, and Leaf springs industries. It is based in Ebersbach-Neugersdorf, Germany.
MASCHINENTECHNIK PRETZSCHENDORF GMBH

Germany

We manufacture mechanical fasteners, machine parts and CNC machined made-to-order parts. Among other items, our product range includes: – CNC milled parts to customer specifications – Fitting keys in accordance with DIN 6885 – Sunk keys in accordance with DIN 6886 – Tangential keys in accordance with DIN 271 – T-slot nuts in accordance with DIN 508 and rhombus slots nuts – Gib head keys in accordance with DIN 6887 – Grooved pins in accordance with ISO 8746 (DIN 1476), ISO 8747 (DIN 1477) – Tubular rivets in accordance with DIN 7340, DIN 7339 on request – Woodruff keys in accordance with DIN 6888. In addition, we can manufacture almost all DIN parts in a modified form as made-to-order parts. The following machining methods are available: Sawing, milling, drilling, counterboring, thread cutting (including inch and American standard threads), surface grinding and barrel finishing. Our parts are used in a wide variety of industries, such as mechanical engineering, the electrical and electronics industry, gearbox manufacturing and the construction industry, among many others.

Website

Product recommendations

Poland

Turkey

Germany

Greece

See more products

HEUER METALLWAREN GMBH

Germany

HEUER Metallwaren GmbH is a reprivatised, medium-sized company based in Großröhrsdorf (Saxony), Germany. Our team of 50 specialised and long-standing employees are committed to providing solutions with a special touch of Saxon innovation, proving that nothing is impossible. Großröhrsdorf is conveniently located on the A4 motorway, 25 km east of the Saxon capital of Dresden. Our production facilities are geared towards the production of small metal parts. We mainly process strip stock in a wide variety of alloys. Our in-house CAD design office, together with our tool manufacturing department, allows us to quickly respond to customer requests. Our tool manufacturing department can provide all the necessary machine tools. Eccentric presses and automatic punching machines of up to 1600 kN are available for punching applications. The manufactured punched parts are washed/degreased or finished by means of vibration to achieve the final surface quality. Our assembly shop utilises toggle and eccentric presses as well as riveting and welding machines. We also have manual assembly workspaces. Other methods, for example tempering, galvanising or laser machining, are made possible through cooperation with authorised partners.

Website
ALFRED WEIGEL FEDERNFABRIK GMBH & CO. KG

Germany

The company ALFRED WEIGEL FEDERNFABRIK GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Leaf springs industry. It is based in Chemnitz, Germany.

Filters

Results for

Springs

Number of results

14 Companies