Results for

Service Provider - Metal cleaning systems

8 Companies

13 Products

ALL BLUE

Netherlands

Lifting boats that's what we do. The boatlift systems are suitable for every location and every boat. About our boatlifts: we weld all components that are not adjustable, which prevents premature loosening of parts and there is no contact of dissimilar metals in a salt-water environment. The boatlift drive is obtained by the patented Sea-Drive transmission. This drive is very powerful, almost noiseless and very maintenance low. In addition to the correct technical operation we also foresee in the need for a specific designed "bunk-set" that ensures in correct and safe lifting and respects the structural integrity of your boat. All our products are certified according CE, ISO or the EUROCODES. Our point of view is a turnkey solution, starting from location advice, technical determination and commitment to an overall building responsibility. Our boatlift systems with a long-lifespan (+30years) contribute to a greener and more sustainable world for our next generation. Becasue all boatlift materials are fully recyclable! Your boat doesn't need antifouling any more. Next to this you don't need to use environmentally damaging materials for cleaning and maintaining your boat. This clean hull results in less fuel consumption and overall better sailing condition! The depreciation of you boat will be much lower and you know it's always safe, also during heavy weather conditions.
VERTEX CJSC

Azerbaijan

Vertex CJSC ( www.vertex.ws) was established in 2003. We specialize in: · All kinds of Offshore/Onshore Electric works, including ATEX inspection and certification (we manufacture: electric distribution boards, panels and other equipment at our factory as well), · Offshore/Onshore HVAC Systems Installation and Maintenance, · Offshore/Onshore Piping/Tube fitting/Instrumentation/Metal Fabrication/Welding works, · Offshore/Onshore Construction and Fit-out Services (we manufacture Multi-Purpose Porta-Cabins (Containers), Electric Panels, etc.), · Man-Power supply · Networking, · Oil & Gas / IT product supply - Vessels' tanks cleaning All our specialists are certified in accordance with international standards for working both On-Shore and Off-Shore. We are representatives of a number of international Companies, e.g. Johnson Controls Company (JCI - http: //www.johnsoncontrols.com/) and CTS (https: //www.cts.global/) – worldwide leader in manufacturing of variety products for the tank storage industry (including tank storages), Eaton (www.eaton.com) - American engineering corporation, manufacturer of electrical and hydraulic equipment, automotive components, components for the aviation industry You can find detailed information at our website www.vertex.ws
EUROGALVANO

Italy

Eurogalvano operates in the GALVANIC TREATMENT, MODULAR JOINTS and 3D PRINTING macro-areas. We provide quality surface treatments. Foundry, cleaning, chroming and high quality painting. Liquid painting as well as powder coating. Manufacturing of MADE IN ITALY modular joints. Eurogalvano designs and produces modular joints and accessories. It's a matter of over 200 kinds of components that are needed for assembling modular systems that are used both for home as well as for company and industrial furnishing. Our production is entirely Italian and can supply round or square joints, tubes and accessories with various diameters and lengths. 3D Printing: As of today we can develop and design prototype or functional parts in NYLON, LOADED WITH CARBON FIBRE, GLASS FIBRE, KEVLAR FIBRE. Furthermore, thanks to the new Metal X printer these can also be STEEL, TITANIUM, ALUMINIUM parts starting from scratch from design software of from scans provided entirely by state-of-the-art 3D scanners.
TRU

Belgium

TRU is a leading expert in cleanroom cleaning based in Belgium. With years of practical experience in cleanroom cleaning, we are the perfect partner for custom advice. Our cleanroom cleaning specialists are given comprehensive general training followed by specific on-the-job training. They uphold the highest quality standards when working for your company. As specialized and experienced cleanroom cleaners, we will clean your controlled production environment according to fixed procedures. The result is a spotless cleanroom that meets strict industry standards. TRU specialises in: - Cleanroom cleaning - Equipment cleaning. We are the only Belgian company dedicated exclusively to the critical cleaning of cleanrooms and equipment. It is this unique focus that sets us apart. Our specialisation results in greater safety and lays the foundation for our talented employees and our professional training programmes. Our services : - Cleanroom cleaning - Equipment cleaning - Training - Audit - Free scan. The entire TRU team is committed to achieving the same goal: providing your company with the highest quality service. This involvement is deeply rooted in our corporate culture. There is always room for feedback and improvement on the work floor, as this benefits everyone. Thanks to our specialisation and dedication, you can always count on the TRU experience. Please contact us for more information !

All the products for "metal cleaning systems"

Audit Cleaning Procedures

Audit On-site

Efficient Improvements

Free Scan of Your Cleanroom Cleaning Procedures

Expert Review Of Your Procedures

Website See all products
BRUNETTO S.R.L.

Italy

The company BRUNETTO S.R.L., is a Service Provider, which operates in the Scouring - steels and materials industry. It also operates in the metal cleaning, sandblasting, metal cleaning, and steel polish industries. It is based in Nichelino, Italy.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ROKVELAS, UAB

Lithuania

Rokvelas UAB is a Lithuanian company that offers metal working services for small serial and serial production. We have 11 years’ experience in exporting our products and services. We specialize in the production of steel structures, CNC machining. We provide complete package of services in accordance with our clients’ requirements We offer a wide range of products and services: production, general arrangement, complementing, different coverings, logistics and many more. Services: CNC punching; CNC bending; CNC turning; CNC milling, cutting with band saw; welding; flat polishing; rolling of sheets. Constructions can be: hot deep galvanized; painted in powder way; sandblasted and painted in wet method; electroplated in different ways. All our steel structures meet requirements of EN 1090-1, 2 standards. Management system ISO 9001 certified. Please visit our website for more information.

All the products for "metal cleaning systems"

CLEANING - STEEL AND METALS

See all products
COMPANY TOR

Russia

The company "TOR" was formed in 1992. From the very beginning, the company's management planned to produce devices not only equal to, but also superior in quality to the world's developments. The torus-200 welding machine was one of the first Russian-made inverters. It has produced a truly revolutionary effect on the Russian market of welding equipment! Its technical parameters were not inferior to foreign analogues of European production, and the price was much lower. Currently, thanks to the improvement of the technological process, we have managed to increase production capacity, which has allowed us to increase production volumes and expand the line of torus devices from household to industrial, while maintaining high quality and affordable prices. But the demands of the market are constantly growing, and our company does not stand still either. Large government projects require powerful welding equipment. We have patented and started mass production of another line of welding equipment under the brand "Viking". The company's TOR welding equipment is certified by NAKS (National welding control Agency). All production and Assembly of TORUS and VIKING welding inverters is carried out in Russia by highly qualified and carefully selected personnel. Quality control is performed at every stage of the building process. All devices undergo multi-stage testing before release.

See all products
DRAM S.R.L.

Italy

The company DRAM S.R.L., is a Service Provider, which operates in the Welding, plastics - machinery industry. It also operates in the systems and machines for forge welding of metals, and systems and machinery for arc welding metals industries. It is based in Milano, Italy.

Find quotes for

Filters

Results for

Service Provider - Metal cleaning systems

Number of results

8 Companies