Painting - Import export

We use time and consumables much more efficiently with robotic solutions in paint processes. With the decrease in paint usage according to the current situation, we both increase efficiency and keep your employees away from the unhealthy atmosphere of the paint environment by applying standard thickness paint without any errors on the entire surface.

Steel painted. Aluminium bright. Note: When using spherical washers use the wide series 07420 Form G.

Titanium dioxide, (TiO2), also known as titanium(IV) oxide or titania is a white, opaque, naturally occurring mineral existing in a number of crystalline forms, the most important of which are rutile and anatase. These naturally occurring oxide forms can be mined and serve as a source for commercial titanium Titanium dioxide is odourless and absorbent, mineral forms can appear black Because of its bright whiteness, it is used in products such as paints, coatings, papers, inks, toothpaste, cosmetics, glass, ceramics and food coloring Properties: CAS number,13463-67-7 Melting / freezing point Anataz: 1560°C, Rutyl: 1843°C, Brukit: 1825°C Boiling point range 3000°C Relative density Anataz: 3,9 kg/l (20°C), Brukit: 4,17 kg/l (20°C), Rutyl: 4,26 kg/l (20°C) Solubility in water 1μg/l Chemical formula TiO2 Appearance White solid Odor Odorless Molar mass 79.866 g/mol Density: 4.23 g/cm3 (rutile) 3.78 g/cm3 (anatase)

White spirit, mineral spirits, or mineral turpentine, turpentine substitute, petroleum spirits, is a petroleum-derived clear liquid used as a common organic solvent in painting White spirit is often used as a paint thinner The word "mineral" in "mineral spirits" or "mineral turpentine" is to distinguish it from distilled spirits (alcoholic beverages) or from true turpentine (distilled tree resin) It is insoluble in water and used as an extraction solvent, as a cleaning solvent, as a degreasing solvent and as a solvent in aerosols, paints, lacquers, varnishes, and asphalt products Uses: Degreasing and lubricating, Solvent and paint thinner,Portable stoves Industries: Household chemicals,Painting materials,Hydrocarbon solvents,Dry cleaning Properties: Initial boiling point (IBP) 145–174°C Final boiling point (IBP+21)°C Average relative molecular mass 150 Relative density 0.780 @15°C Flash point 31–54°C Solubility in water (w) < 0.1% CAS Number 64741-92-0 EC Number 232-489-3 UN no. 1268

Talc is a naturally occurring mineral, mined from the earth, composed of magnesium, silicon, oxygen, and hydrogen. Chemically, talc is a hydrous magnesium silicate with a chemical formula of Mg3Si4O10(OH)2 Talc has many uses in cosmetics and other personal care products, it may be used to absorb moisture, to prevent caking, to make facial makeup opaque, or to improve the feel of a product Industries: Paints and varnishes, Household chemicals, Cosmetic industry, Adhesives, oils, greases, Pharmaceutical industry, Building chemistry, Resins, plastics, polyurethanes Talc is used in many industries, including paper making, plastic, paint and coatings, rubber, food, electric cable, pharmaceuticals, cosmetics, and ceramics Properties: CAS number 14807-96-6 WE number 238-877-9 Chemical formula 3Mg2∙4SiO2∙H2O Molar mass 379,34 g/mol Customs tariff code 25262000

Oil paint, watercontaining paint, mineral paint, synthetic paint, ... ZINC WHITE NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IJZEROXIDES: yellow, red, brown, black DRAGON PIGMENTS: red, yellow, blue, green, grey CHROME LEAD/ LEAD CHROMATE: yellow, orange MOLYBDATE ORANGE CADMIUM SULPHIDE: yellow, orange, red CHROME OXIDE GREEN CHROMATE GREEN COBALTOXIDE: green, blue ULTRAMARINE: blue, violet MILORI OR PRUSSIAN BLUE CARBON- or PITCH-BLACK IVORY OR BONE BLACK CHROMATE GREEN YELLOW: PY 1, PY 3, ... RED: PR 2, PR 3, ... GREEN: PG 7, PG 8, ... BLUE: PB 15, TITANIUM DIOXIDE WHITE A pigment is a substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier.

Murals, stucco, decorative elements, mineral paints, ... NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IRON OXIDES: yellow, red, brown, black DRAGON PIGMENTS: red, yellow, blue, green, grey CHROME OXIDE GREEN COBALTOXIDE: green, blue CARBON- or PITCH-BLACK (limited) ULTRAMARINE: blue, violet TITANIUMDIOXIDE WHITE A pigment is a substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier. The colouring capacity of the pigment depends on the fineness of the particles composing the pigment. In general we can say that the finer the particles are, the higher the colouring capacity of the pigment will be. A pigment is only suitable for certain applications. The pigment shouldn’t react with the carrier.

Roestique produces even more nuances in texture and colours for a layered interior design, and contributes to a warm and sophisticated living environment.

These mineral wall decoration products create walls with texture and character. Crustal looks and also feels authentic, bringing the harmony of nature into your interior.

Degreasing bath treatment Ultrafiltration is established for a long time for applications like treatment of emulsions, degreasing baths or craft detection oils. With ultrafiltration, oil and dirt particles are separated. So, the particle-free filtrate can be used for degreasing again. According to the recommendations of suppliers for degreasing chemicals tensides are added to the degreasing bath. So, lifetimes up to 3 to 6 months can be reached for degreasing baths. Osmo Membrane Systems GmbH offers an upgrade for your degreasing plant in replacing the polymer pipe modules by ceramic modules. Ceramic modules are more temperature resistant, chemical resistant and changing pH-values. On the one hand, the separation efficiency will be increased and on the other hand, the lifetime of the degreasing plant will be increased significantly, because polymer modules have to be changed much more, depending on the application. The costs for the upgrade are equal to the costs for working with poly

Round dialysis cells The cylindrical electrode is mounted into the cylindrical membrane, which is hold by a strong pervious pipe from the inside and protected by a mesh from the outside. The anolyte is leaded through the anode pipe through the bottom of the electrode and flows constantly through the toroidal gap between electrode and housing to the anolyte outlet. By the standardized membrane support, a multitude of membranes can be used. The pipe cells of OSMO Membrane Systems GmbH are easy to handle, because even a 2m long electrode only weights 8 kg. Advantages of the OSMO round dialysis cells: Can be opened without tools by quick release fasteners Anode pipe made of seamless thick-walled stainless steel 1.4571 (standard) – treated titanium available on request Continuously anolyte inflow and outflow as well as selective anolyte distribution Anode can be turned inside the membrane

Flat dialysis cells Flat dialysis cells of OSMO Membrane Systems GmbH are designed very robust and without any dead spots, to avoid sedimentation of the painture. The membrane is is very pressure resistant and tearproof. The fluent properties are optimized according to the degassing properties. Design in 3 standard sizes Aniones-exchange-membrane with a high permselectivity Support material PP Robust design with height-adjustable mounting Anode material 1.4571 (standard), treated titanium on request Cell design with PP and P E

Ultrafiltration of kathodic deposition paint The filtrate of the ultrafiltration is added to the immersion bath by a spray ring, which is installed directly over this bath. So, the recovery of the remaining color is possible and by separation the color particles, painting defects can be avoided. In the last spray zone, organic solvents from the ultrafiltration are washed away be demineralised water. Concentrated with these solvents, the water is leaded into the color bath. The process is a closed loop without any waste waters. The paint bath can be contaminated with pre-tretment chemicals like e.g. phosphates, chlorides, chromates. so, a part of ultrafiltrate has to be leaded out to avoid concentration of the paint bath with these chemicals. If no ultrafiltration is used, big amounts of waste waters will arise, which are difficult to dispose. Our ultrafiltration plants are customized in membrane are, retention rate and membrane type.

Anolyte station Individual approaching flow of each dialysis cell be measuring each single volume flow.... ... constant anolyte quality by high-resulting measurement of conductivity.

Ecoating Equipments