Compressor oil - Import export

INOX HLP 10 INOX HLP 15 INOX HLP 22 INOX HLP 32 INOX HLP 46 INOX HLP 68 INOX HLP 100

Oxidation resistant compressor oils (polyglycol/ester) with low evaporation loss. They prevent specifically thermal decomposition and deposits in rotary vane compressors. Not miscible with mineral or PAO oils.

Compressor oils based on polyalphaolefines (PAO) and additives with InS/H1 food grade approval. Applicable in reciprocating, rotary vane, screw and ammonia compressors.

Car air conditioning compressors using R-134a variable or fixed displacement.

Refrigerating compressors using HFC refrigerants.

​Refrigerating Compressor oil for Ammonia (R 717) and R12, R22, R123, R502 refrigerant

Refrigerating compressors using NH3/ammonia.

Refrigerating compressors using CFC, HCFC and NH3 as a refrigerant.

Lubrication of rotary compressors of LPG hydrocarbon gases or liquefied natural gases LNG such as: - methane, ethane, ethylene, propane, propylene, butane, butylene, butadiene, as well as chemical gases such as: - ammonia, vinyl chloride monomer. Lubrication of refrigerating compressors using LPG gases as refrigerant fluid, in the oil and petrochemical industries (refinery, drilling platform, recompression post, liquification plant).

Rotary screw-type air compressors.

High-pressure reciprocating air compressors, rotary compressors and turbocompressors.

Rotary screw-type air compressors.

Rotary and reciprocating air compressors.

Refrigerating compressors using NH3/ammonia.

Refrigerating compressors using CFC or HCFC refrigerants.

ESSOSFF Series Oil Seperators are designed to seperate the mixture of the oil and refrigerant which caused by the compressors’ discharge. By the return of the discharged oil to the compressor, the life-span of the compressor and system is extended. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. By having the flange type connection model, it can be cleaned during the system maintenance. Using special materials (stainless steel and brass), flawless and long life-span design. ESSOSFF Series Oil Seperators are designed with Solder type connections as a standart. The oil return connection is SAE 1/4″. PROPERTIES: Having special design, long life-span without any problems, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

ESSOSF Series Oil Seperators are designed to seperate the mixture of the oil and refrigerant which caused by the compressors’ discharge. By the return of the discharged oil to the compressor, the life-span of the compressor and system is extended. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. Using special materials (stainless steel and brass), flawless and long life-span design. ESSOSF Series Oil Seperators are designed with Solder type connections as a standart. The oil return connection is SAE 1/4″. PROPERTIES: Having special design, long life-span without any problems, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

The STRATE AWAaerob 110 - 1700 ventilation system consists of an oil-free compressor with noise suppressor, a switching system with operating hours counter and a timer, as well as a complete connection fittings set with manometer, check valve and connection line. The ventilation quantity and duration are adjusted by the timer based on the compressor run time. Fine pearls of oxygen are injected from the air. Ideal for short pressure pipes and high flow speeds in the pressure pipe Area of application for pressure pipes <= DN 200 Use with or without accompanying pipe (depending on the high and low points in the pressure pipe)

INOX Slide and Bed Track Oils INOX Spray Oils INOX Compressor Oils INOX Formwork Oils INOX Cutting Oils INOX Grinding Oils

Multipurpose oil for bearing, lever and joint lubrication Hydraulic oil for use in all areas in which physiologically harmless are required Compressor oil for piston compressors for prescribed oil ISO VG 100 Advantages and benefits NSF H1 registered Long economic operating times thanks to optimal additives against oxidation and ageing Good cold behaviour Resistant to cold and hot water, steam as well as disinfectants and cleaning agents For universal use due to long-term lubrication and high adhesive strength Good wear protection Tasteless and odourless Conforms to VDL requirements

Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant Machining oil additive for chip-free or cutting production to increase working speeds and tool life Advantages and benefits Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils Highly effective due to finest, homogeneous MoS₂ distribution in the oil Broad range of uses with many different oils and alone as a high-performance oil Lowest friction due to high lubricating effectiveness of MoS2 Fully stabilised without precipitation

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 46 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates

It i s a mineral base oil prepared with superior base oils and additive packages. It is developed for lubrication and cooling of screw, crawler and piston compressors. It has an excellent protection against rust and corrosion. • It prevents wearing. • It has a very high resistance to oxidation. • It reduces oil consumption by preventing clogging of oil filters thanks to its easy separation from air and water.

1,1-Dk:hloro-1-flucroethane is a haloalkane with the formula C2H3CI2F. It is one of the three isomers of dichlcrofluoroethane. It is mainly used as a refrigerant under the names R-141b or HCFC-141b. R1410 refrigerant is also foaming agent as alternative to CFC-11. and precisionRefrigerant R-141b. Used for cleaning cooling systems, it is generally used when replacing a Burned compressor, bad oil or impurities within the system. We can make shipments at the buyer's expense.

Mikropor Spin-On Type Air/Oil Separators are manufactured as exchangeable elements. Because Spin-Ons do not require a compressor housing, they permit uncomplicated and quick replacement without dismantling the compressor. Spin-On Type Air/Oil Separators are available for 0,5 to 7 m³/min flow rates operating at 7 bar.

Our Compressed air filters are the first line of defence for any air compressor and have a significant impact on the service life of the compressor, lubricant, air/oil separators, and oil filters. We offer the highest efficiency air intake filters in the market, outperforming the competition and delivering more value to customers. With over 3000 Air/Oil Separator designs for compressors, we offer multiple options for the full range of airflow and performance requirements. Our water separators have been designed for the removal of bulk liquid water and particulate from compressed air and gases. Unique centrifugal action removes contaminants at low-pressure drop for maximum energy saving. You can download our product catalogue and brochures on the left panel in order to see our wide variety of products below.