De-aeration - Import export

Thermal aerator for windows in translucent thermoplastic material with manual opening and closure system, with anti-insect net. It can be installed both on single and double glazing by simply turning the ring.

The iGRAIN Relay Output Unit is a control module designed for automatic control of aeration and head space ventilation fans. The unit is controlled from the iGRAIN Dashboard Manager or control board via RS485 MODBUS. Each unit has 8 relays with NO (Normally Open) and NC (Normally Closed) relay contacts and the status of each relay is indicated with a diode. Each relay unit can be set to an individual address and be installed remotely where the aeration power relays are located. The unit is normally only used for aeration control if there is no PLC/SCADA system available. Advantages • Status and control by iGRAIN Dashboard Manager • Easy control board mount • Operates in either manual or automatic mode via the aeration control software

Round PVC aerator caps Drilling diameter: 25, 43 and 70mm Color: white

Distinct Advantages of Enviro Ceramic Diffusers 1. Enviro Ceramic invented a novel anti-microbial inert ceramic: this technology is protecting the diffusers ceramic membrane working surface and more importantly inside the Nano pores, preventing algal and biofilm growth that block the pores. This greatly reduces costly maintenance and the risk of diffusers blocking up and not working effectively. 2. Our unique design with the patented central hole causes the tanks bottom water stream to mix through with the air lift for additional aeration. This increases efficiency as anaerobic water is moved through the oxygen rich stream. 3. The ECD can be used with lower pressures compared to some other competitor’s diffuser. It will however achieve the same flow rate with smaller bubbles due to our unique ceramic and surface technology. Lower pressures mean less stress on your system as well as reduced energy and operational costs. 4.

Slow speed aerators used for aeration and mixing of urban and industrial wastewater in various processes Provided in either fixed bridge or floating designs Ideal for Aerating most types of wastewater or industrial euents The TLF® Turbine Aerator is one of the most ecient aeration products in the marketplace Produces High Mixing and Homogenous Solutions in large lagoons and ASP tanks. IP55 geared motor with IE3 highly efficient rating Coupling sleeve and based materials coated with high grade Epoxy Paint Float can me supplied in various materials including HDPE Rotor made of glass fibre reinforced polyester. The GRP has a low density which allows installation without having to empty the tank and the design also reduces the axial loads on the gearbox.

Bladed Horizontal surface aerator suitable for circular, racetrack or rectangular channel. Designed to be maximise oxygen and flow. Use of high-quality materials of construction together with mechanical gear driven equipment. Reliable equipment with extremely long service life. COMPONENTS Brush bridge shaft with anti-corrosion paint Galvanised Steel brush blades or stainless steel Side protection discs Bearings Vertical geared motor with high energy class IE3 enclosure and eciencies Horizontal geared motor with energy class IE3 enclosure and eciencies Geared motor support bracket Upstream and/or downstream rotor cover Automatic grease cartridge Operator safety features on and upstream of the brush aerator

Optigrun Aeration Substrate U-heavy is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with high load capacity; high build-up.

Optigrun Aeration Substrate U-light is used as a drainable filler substrate beneath Optigrün Intensive Substrate I on intensive green roofs with low load capacity; higher build-up.

High-reach diffusers with 6-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

High-reach diffusers with 3-way air outlet. - Admissible flows from 5,500 m3/h to 63,000 m3/h. - Made of galvanized steel painted in oven-dried polyester powder paint in RAL 7035 gray. - Simple deflection grilles with slats made of polyamide. - Opening regulation from 0º to 90º. - Possibility of supply with double deflection grids. - 30mm METU clamping frame.

Submersible degreasing aerator The AEROSPEED is a submersible degreasing aerator that produces microbubbles which in turn causes grease to float onto the liquid surface. The unit is easy and simple to operate and install. Robust IP68 cast iron motor, coated with epoxy and equipped with a temperature control sensor Motor specially adapted to the constraints of operating a submerged degreasing aerator according to Europelec standards Stainless steel suction tube Stainless steel frame specially designed to optimize the hydraulic flow Stainless steel propeller specifically designed to ensure simultaneous mixing and suction of air.

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s. 1.5 – 30kw Drive Motors 2 + 4-Pole + Dual Speed, Direct Drives Submersible Motor – IP 68 protection AISI 304 / 316 or special SS

As a floor mounted submersible aerator with intensive mixing action, it is ideal for deep tanks, existing pocket ASPs with moderate to high sludge concentrations and will re-suspend of settled sludge

Specifically designed for fixed or Float mounting which allow impeller immersion to vary in accordance with flow levels and associated oxygen demand. Ideal for Oxidation Ditches and Pocket ASP’s.

Submerged self-aspirating aerator for wastewater treatment in municipal and industrial applications. Ideal for the Aeration of shallow and medium depth sewage treatment plant tanks. Suitable for buer basins, aeration tanks, aerated lagoons and SBR reactors. Size ranges from 4kW to 37 kW. IP68 Robust motor in epoxy coated cast iron, equipped with temperature control probe Motor specifically adapted for operating submerged and at high-speed in accordance with europelec stan- dards AISI-304 or AISI-316 stainless steel frame specially designed to optimise performance Discharge channels distributing the airflow to optimize aeration and mixing

Submerged turbine operating at low speeds combined with an air blower for oxygen input. The Sofie® Submersible Aerator/Agitator is a mixing unit for extremely challenging applications. The units minimise blocking or clogging, the Sofie® can be used as an aerator or an agitator for wastewater treatment. Sofie® is designed to be installed at the base of tanks and to operate either in aeration or in a mixing mode. Sofie® is a good alternative to mechanical fine bubble aerators and is suitable for ponds with oxygen or mixing requirements.

Totally independent Aerator and Mixer. Air Provided by Blower with Variable Frequency Drive which can regulate oxygen supply from zero to maximum capacity; whilst retaining full mixing and oxygen dispersion capability therefore the units are ideal for SBR ASP & MBR applications.

This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the membrane. PUSHCART manufactured in Stainless Steel and complete with the following Storage box in HDPE PVDF lined dosing pump Flexible delivery hose 25m in pvc (reinforced with polyester fibres) Spray nozzle in stainless steel

The Aquafen® is a high-speed floating aerator for the aeration and mixing of industrial effluent and wastewater prevents stagnation in lagoons. Provided the supply and distribution of oxygen for the treatment of wastewater. Allows the wastewater to be mixed to maintain the solid particles in suspension and ensure effective treatment of the solution in the lagoons. Designed for simple installation and can be in situ above the water surface without draining the lagoon. This aerator is used for many various applications including bioreactors, activated sludge reactors, SBRs and fixed and variable level treatment lagoons.

The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be treated.

Fine bubble aeration system for lagoons & large surface area ponds. HDPE Floating Feed pipe sized to provide the required air flow Air supply pipe to difusers Aquatube 70 type Tubular Diffusers Stainless Steel Diffuser Feed Section Concrete ballast to stabilise the diffuser assembly Cost-effective solution Low maintenance Specific modular system Adaptable to any lagoon or large pond Low maintenance requirements Very reliable system easy to install and operate Very competitive design and scope of supply Significant mixing of the total volume within the lagoon The active biomass is aerated effectively and efficiently.

These are the parts used in ventilation system.Used for urban building ventilation, household product ventilation and other products.

Special watersaving aerator is used in our faucets. (Foam flow, Lime Crusher) A filter is recommended at the entrance of the flat as it will overcome the damage of any kind of pollution that may occur in the installation. All our products are sent in a box with a warranty certificate and invoice. Battery Technical Dimensions Battery spout length 100 mm Battery connection threads 3/4 ”1/2” Ideal work research 34 Bar Our products are made of 1st quality brass material. 5 years warranty. Water and pressure test achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated.

Special watersaving aerator is used in our faucets. (Foam flow, Lime Crusher) It is recommended to use a filter at the entrance of the apartment in order to prevent any possible pollution in the installation from damaging the luminaire. All our products are sent in a box with a warranty certificate and invoice. Battery Technical Dimensions attery Spout length 181 mm Battery connection threads 3/4 ”1/2” Ideal working pressure 34 Bar Our products are made of 1st Quality Brass material. 5 years warranty. Water and pressure testing has achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated

Special watersaving aerator is used in our faucets. (Foam flow, Lime Crusher) It is recommended to use a filter at the entrance of the apartment in order to prevent any possible pollution in the installation from damaging the luminaire. All our products are sent in a box with a warranty document and invoice. Battery Technical Dimensions Battery outlet length 140 mm Battery connection threads 3/4 ”1/2” Ideal working pressure 34 Bar Our products are made of 1st Quality Brass material. 5 years warranty. Water and pressure testing has achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated

Special watersaving aerator is used in our faucets. (Foam flow, Lime Crusher) It is recommended to use a filter at the entrance of the apartment in order to prevent any kind of pollution that may occur in the installation from damaging the luminaire. All our products are sent in a box with a warranty document and invoice. Battery Technical Dimensions Battery Spout length 129.50 mm Battery connection threads 3/4 ”1/2” Ideal working pressure 34 Bar Our products are made of 1st Quality Brass material. 5 years warranty. Water and pressure testing has achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated

Special watersaving aerator is used in our faucets. (Foam flow, Lime Crusher) It is recommended to use a filter at the entrance of the flat in order to prevent any kind of pollution that may occur in the installation from damaging the luminaire. All our products are sent in a box with a warranty certificate and invoice. Battery Technical Dimensions Battery spout length Battery connection threads 3/4 ”1/2” Ideal working pressure 34 Bar Our products are made of 1st quality brass material. 5 years warranty. Water and pressure testing has achieved 100% success in all of our products. Our products are made of healthy materials. Our products are high quality chrome plated.

With the AIR Free Coniotomy application, the patient's airway is opened in as little as 22 seconds. Due to the obstruction of the upper respiratory tract, very serious life risks occur. The Air-Free Coniotomy Set is currently available in 2 sizes, Child and Adult. Contents of the Air Fre set 1 Trocar with Scalpel Fixed 1 Standard Adapter 1 Piece Artificial Respiration Apparatus 1 Piece Manual Aspiration Catheter 1 Piece Neck Fixation Tape It provides the opportunity to apply Coniotomy in a very short time (approximately 22 seconds). It provides risk-free and easy use.

The continuous product flow from the filling chamber is ensured by the fluidization air quantities being adjustable to your product. For compact bag shapes the special BEHN + BATES filling de-aeration nozzle removes the air from the bag already during filling.