Aluminium diecasting - Import export

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Satin black painted version is painted with tough polyester powder paint for a lasting finish, even after machining Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket which is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Very economical - thick wall - diecast aluminium - watertight electronic instrument enclosure. • Rugged, diecast aluminium alloy (tough - yet easy to machine). • Two piece "tongue and groove" construction for protection against access of dust and water. • Ideal for repetitive opening and closing. • Easy to wall mount using "through box - blind hole" construction (on all sizes except: 1550Z102, 1550Z115 and 1550Z120). Access to blind holes is outside of gasket ring for superior protection. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder for a lasting finish, even after machining. Finish is applied to the entire enclosure (inside and out). • Lid secured with either two, four or six (count varies with size) stainless steel, Philips head, counter sunk, machine screws - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Four 6-32 x 1/2" machine screws secure lid - into factory tapped holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Available in natural vibra finish OR in light textured, black powder paint. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Painted version is painted with tough satin black polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance the assembled appearance. • Lap joint construction protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. The enclosure does not provide shielding when water-tight gaskets are installed. • M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid into factory tapped holes. • Designed to meet IP54 without a gasket or IP66 with a gasket. IP67 upgraded gaskets are available. • All sizes except 1550Z101** carry an impact rating of IK08 per IEC62262.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Unpainted version is vibra finished for a smooth surface with no sharp edges. • Textured black version is coated with tough polyester powder paint for a lasting finish, even after machining. Black screws are included to enhance appearance. • Includes screws threaded into factory-tapped holes. Screw type and quantity vary. • Standard versions are designed to meet IP54. • Water-tight versions are designed to meet IP65 and include a gasket. Gasket is supplied loose inside the enclosure (not pre-installed). • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • High impact strength, zinc diecast alloy (tough - yet easy to machine), electronic instrument enclosure. • Zinc material also offers easy ability to plate the enclosure. • Zinc material is soft and easy to machine and offers a heavier weight alternative (over double) to the 1590 diecast aluminium enclosures. • Zinc diecast enclosures provide extra coolness to the touch and add perceived premium quality weight to your product. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Enclosure is vibra finished for a smooth surface with no sharp edges. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting. • Four (or six in the1590K432) M3.5 x 0.6 x 12mm long stainless steel, Philips head, machine screws secure lid - into factory tapped holes.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Aluminium allow to BS1490, LM2M - supplied in natural finish. • Eddystone designed. The Eddystone brand was purchased by Hammond in 1998. • Lap joint construction provides protection against access of dust and splashing water. Also provides excellent EMC performance. • Lids are retained by M3.5 x 12 countersunk screws (POZIDRIV No. 2 head). • Countersunk lid holes. • Designed to meet IP54. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Factory powder coated to save stomp box manufacturers and experimenters time and money. • Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining. • Smooth finish allows for easy adhesion of labels and/or silk screens. • Colours are matched to standard RAL colours. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Designed to meet IP54. IP65 rating available, but this also requires water-tight screws. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

Product Features: • Heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body, • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • Diecast aluminium end panels are rugged - yet easy to machine. Front and rear gasket is a full perimeter conductive foam/fabric made of a Ni/Cu (nickel/copper) and CPSA (conductive pressure sensitive adhesive). • Designed to meet IP54 ratings. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).

Product Features: • Watertight - heavy duty extruded enclosures designed to house P.C. boards or for equipment interfacing. • Sized for standard Eurocard's. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged body constructed from one piece, extruded aluminium with a minimum thickness of .06" (1.5mm). • Extruded aluminium body includes a recessed area for labels or membrane keypad. • End panels are rugged - yet easy to machine - diecast aluminium with full perimeter self-adhesive gaskets. • Designed to meet IP65. • Choice of two versions - end panels without flange or with flange (for shelf or wall mounting).