Rolled steels - Import export

Dimensions Thickness: 5 mm up to 150 mm Width: 1000 mm up to 3050 mm Tolerances: EN10029, ASTM A6, ASTM A20, ASME SA6, ASME SA20, DIN 1543, JUS. C. B4. 110 UT Tests: EN 10160:1999 Z quality requirements: EN 10164:1993 Weight and terms of supply: Maximum plate weight is 8 tons 9,5 tons can be produced upon request Flame cutting between 40 to 150 mm thickness Surface conditions: rolled, sandblasted and primer coated High tensile strength plates according to DIN standards can be produced with hardness at - 50 degrees and yield strength at high temperatures, whichever is preferred in other standards.

Coloricio offers a wide range of flat and rolled products that prevents steel rust and corrosion through excellent surface finish related to zinc coating: cold-rolled steel/aluminum hot rolled (pickled and oiled) steel/aluminum hot dip galvanized steel/aluminum

Round steel / Square steel, Flat steel , L cornier profile , IPE Steel and much more

Coloricio offers a wide range of flat and rolled products that prevents steel rust and corrosion through excellent surface finish related to zinc coating: cold-rolled steel/aluminum hot rolled (pickled and oiled) steel/aluminum hot dip galvanized steel/aluminum

Steel 1.0401 (C15) or stainless steel 1.4301 (whirled spindles stainless steel 1.4305). Version Steel rolled, bright. Stainless steel up to Tr 40x7 rolled, above this whirled, bright. Note Rolled, high precision trapezoidal thread spindles. ISO trapezoidal thread based on DIN 103. The trapezoidal thread spindle is a transmission thread with relatively high friction. Standard thread forms are selflocking. This has the advantage that they generally do not need to be secured in the rest position. Tolerance class 7e Pitch precision 0.3/300 mm Length sawed with excess, ends not deburred.

Bearing block and carriage aluminium alloy, anodised. Guide columns stainless steel, ground. Spindle stainless steel, rolled thread. Guide bearing maintenancefree. Version Radial play on guide < 0.02 mm. No axial backlash. Spindle selflocking, with additional lock. Note The almost playfree guides and absolutely playfree spindle allow for adjustment without the need to loosen or clamp the spindle. The scale graduation is in 5 or 10 increments; 1 increment corresponds to 0.1 mm of travel. The cross stage can be easily combined with positioning stages, vertical stages and other accessories of respective size by the modular principle.

Housing washer, shaft washer and rolling elements, bearing steel. Cage, steel. Note Axial ball bearings accept high axial loads from one direction but may not be loaded radially. The bearings are separable. This means the bearing parts can be fitted independently of each other. The main dimensions of the axial ball bearing conform to ISO 104 and DIN 711. Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. These tolerance classes are standard and are well suited for most applications.

Lock Nut material: cold rolled steel finish: zinc plated outer diameter: 0.625 +/- 0.015 inch height: 0.125 +/- 0.015 inch internal thread: 3/8-24 UNF - 2B Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Steel Pin, Threaded Stud, for door use 2 holes drilled and threaded, thread grade: 5/16-18 UNC size: hex incircle diameter 0.750 +/-0.010 inch length 4.438 +/-0.010 inch, across flats distance of hex end 0.75 inch, round end diameter 0.625 +0.000/-0.005 inch unit weight: 223 g material: cold rolled steel surface finish: rust preventive oil Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

DC01 DC03 DC04 DC05 DC06 EN 10130 / EN 10139

11SMn30 EN 10087

HCXXXLA EN 10268

THICKNESS TOLERANCES : Thickness tolerances according to EN 10051 for nominal widths. WIDTH TOLERANCES: Width tolerances according to EN 10051 for nominal widths Other, closer dimensional tolerances on request. EDGE CAMBER TOLERANCES: Sag tolerances according to EN 10051 for pickled hot-rolled strips will be agreed when placing the order. RIPPLE - LONGITUDINAL FLATNESS: The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm on 1000 mm. Any other flatness requirement must be agreed when placing the order.

THICKNESS TOLERANCES : Thickness tolerances according to EN 10051 for nominal widths. WIDTH TOLERANCES: Width tolerances according to EN 10051 for nominal widths Other, closer dimensional tolerances on request. EDGE CAMBER TOLERANCES: Sag tolerances according to EN 10051 for pickled hot-rolled strips will be agreed when placing the order. RIPPLE - LONGITUDINAL FLATNESS: The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm on 1000 mm. Any other flatness requirement must be agreed when placing the order.

THICKNESS TOLERANCES : Thickness tolerances according to EN 10051 for nominal widths. WIDTH TOLERANCES: Width tolerances according to EN 10051 for nominal widths Other, closer dimensional tolerances on request. EDGE CAMBER TOLERANCES: Sag tolerances according to EN 10051 for pickled hot-rolled strips will be agreed when placing the order. RIPPLE - LONGITUDINAL FLATNESS: The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm on 1000 mm. Any other flatness requirement must be agreed when placing the order.

- Wide range of steel grades: structural, cold forming, HSLA, etc. - In coils or cut-to-length - Standard os curtomized sizes

Coloricio offers a wide range of flat and rolled products that prevents steel rust and corrosion through excellent surface finish related to zinc coating: cold-rolled steel/aluminum hot rolled (pickled and oiled) steel/aluminum hot dip galvanized steel/aluminum

Cold Rolled Stainless Steel Tank Brushed exterior finish Interior finish BA Pickled and passivated welds Cold stamped bottoms with optimized profile thickness 2 mm Automated TIG welding process Hole for agitator included Ø 120 mm (optional agitator) Lid with handle for semi opening Total drain with stainless steel ball valve 51 SMS 4 stainless steel welded feet Name plate

316 stainless steel tank Model SCL1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for moving 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick closing lever with EPDM gasket Total emptying with stainless steel ball valve 40 MACON PVC discharge valve Identification plate

304 stainless steel tank Model SCL1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

316 stainless steel tank Model SBPM1250 R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hot galvanized steel chassis Chassis graspable by forklift and pallet truck Double wall height 900 mm (3/4 "M. GAS inlet / outlet) Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve Nameplate

304 stainless steel tank Model SBPM1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hot galvanized steel chassis Chassis graspable by forklift and pallet truck Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve nameplate

316 stainless steel tank No valve (to be mounted) Model MTLM1250R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Double wall height 900 mm (3/4 "M. GAS inlet / outlet) Hole for the agitator included diam. 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate

304 stainless steel tank Model MTLM1250 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate

Model SBPA1000D Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 1.5 mm Automated TIG welding process Hot galvanized steel chassis Chassis graspable by forklift and pallet truck Complete pneumatic float Total drain with 40 MACON stainless steel ball valve Nameplate

316 stainless steel tank Model SCL1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

304 stainless steel tank Model SCL1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Stainless steel handle for movement 4 wheels Ø 200 mm Manhole diameter 400 mm Lid with quick lever closure with EPDM seal Total drain with 40 MACON stainless steel ball valve PVC relief valve Nameplate

316 stainless steel tank Model MTLM1000R Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Double wall 750 mm high (3/4 "M. GAS inlet / outlet) Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet Nameplate

304 stainless steel tank Modèle MTLM1000 Cold rolled stainless steel tank Brushed exterior finish BA interior finish Pickled and passivated welds Cold stamped bottoms with optimized profile, thickness 2 mm Automated TIG welding process Hole for the agitator included Ø 120 mm (the agitator is optional) Lid with handle for semi opening Total drain with 51 SMS stainless steel ball valve 4 welded stainless steel feet nameplate